The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

In the current situation in the housing market and in particular the inner city much attention is directed towards achieved prices per square meter in sales. The indicator is as a principle an appropriate measure of the housing market?s health and development, and can to some extent be used to make approximations of the general economic health status of municipalities and counties. It occurs occasionally that questions about whether prices are based on fundamentals at all times.The thesis questions that very issue, not from a macro accompanying financial perspective but rather from a microeconomic perspective, where each tenant ownership in the study is a micro-object. Are the observed prices per square meter rational relative to housing cooperative?s assets or is there a lack in the observed prices anchoring the respective association's finances.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for Developers when constructing apartment buildings with passive house standards.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Denna rapport handlar om att använda en trådlös kommunikationsteknik som kallas NFC (Near Field Communication) vid kommunikation mellan en Android mobiltelefon och en NFC-läsare som kallas ACR122U. Syftet med detta projekt är att:Välja en Androidtelefon som har stöd för NFC.Skapa en applikation som skall köras på Androidtelefonen och som skall skicka ett lösenord via NFC.Skapa ett program som skall köras på en dator med operativsystemet Windows 7 och som skall hantera ACR122U.Förklara den insamlade kunskapen i detta dokument så andra lättare skall kunna arbeta med NFC.Följande frågor kommer att besvaras i denna rapport:Vilken Androidtelefon bör användas vid utveckling av en applikation som kan kommunicera via NFC?Vad krävs vid utveckling av en applikation som kan kommunicera via NFC?Aktionsforskning är den forskningsmetod som användes vid sökandet efter svar på frågorna ovan. Detta innebär att forskningen görs genom att läsa om ämnet, genomföra en eller flera lösningar för att hitta en fungerande lösning och sedan dokumentera resultaten. Implementeringen av programvaran på mobiltelefonen genomfördes med mycket hjälp från Android Developers hemsida.

When single-family lots are valued for development of new residential areas,the valuation is influenced by several factors. The valuation is a matter ofdefinition that varies according to its interpreter. Previous research conductedin other countries, has identified a number of value-influencing factors. Thesefactors are the basis for this study.The study's purpose is to highlight the value-influencing factors thatcustomers value and are looking for in the choice of single-family lots. Thestudy also seeks to determine if there is an unknown difference between howprofessionals and clients value single-family lots.The study showed that the value factors considered important for customersand also professionals are consistent and applicable with the factors reportedfrom previous research.

Denna rapport handlar om att använda en trådlös kommunikationsteknik som kallas NFC (Near Field Communication) vid kommunikation mellan en Android mobiltelefon och en NFC-läsare som kallas ACR122U. Syftet med detta projekt är att:Välja en Androidtelefon som har stöd för NFC.Skapa en applikation som skall köras på Androidtelefonen och som skall skicka ett lösenord via NFC.Skapa ett program som skall köras på en dator med operativsystemet Windows 7 och som skall hantera ACR122U.Förklara den insamlade kunskapen i detta dokument så andra lättare skall kunna arbeta med NFC.Följande frågor kommer att besvaras i denna rapport:Vilken Androidtelefon bör användas vid utveckling av en applikation som kan kommunicera via NFC?Vad krävs vid utveckling av en applikation som kan kommunicera via NFC?Aktionsforskning är den forskningsmetod som användes vid sökandet efter svar på frågorna ovan. Detta innebär att forskningen görs genom att läsa om ämnet, genomföra en eller flera lösningar för att hitta en fungerande lösning och sedan dokumentera resultaten. Implementeringen av programvaran på mobiltelefonen genomfördes med mycket hjälp från Android Developers hemsida.

The Swedish dairy sector is facing several challenges the coming years. One big challenge is how they will secure the access of their raw material milk in the future. The number of milk producers has decreased for an extended period of time, but was for a long time partly compensated by an increased productivity among the remaining milk producers. From year 2000 that trend was broken and also the quantity of milk produced started to fall quickly. Milko is a dairy company with members from Dalsland in the south to Jämtland in the north. During the first seven moths 2007, their number of members decreased by almost a fourth, from 1 272 to 974.

The purpose of this master thesis is to attract attention to the undefined spaces of our urban landscape and emphasize the need of these spaces in the city. The different values of these spaces are here clearly presented so that they can be considered when real estate Developers show a particular interest in any one of these undefined spaces. The term undefinied spaces can mean a lot of things. The spaces that I now choose to define as undefined spaces are neither planned nor designed. It could for instance be a piece of leftover land in between two residential areas, or as times change, a formerly planned area might be forgotten and left to its own.

The study was conducted in Jönköping County Chamber of fibrillation and is about change and improvement of process modeling technology. The process for treating patients with fibrillation is in the need to evolve and improve. In order to develop the care they needed a current state description which usually is made with the traditional process modeling tool.Many scientists and health professionals is in the opinion that this technology gives a too rigid image to describe the care processes. It also does not sufficiently take into account the human aspects. This reasoning suggests that the process modeling technology in healthcare is in the need to develop multiple perspectives.

As the environmental requirements on businesses increase from various stakeholders, the incentives for businesses to work more with environmental issues also increase. Historically, the requirements were focusing on companies with direct emissions from operations. Lately, the environmental impacts that occur indirectly as results of corporate activities have become more topical. Companies and organizations that mainly offer services often have a greater indirect than direct environmental impact. This is because they are affecting third parties, which in turn have a direct environmental impact.

Vatten är en av jordens livsviktiga resurser, en resurs som hela tiden minskar. I delar av världen råder akut vattenbrist och ofta återfinns industrier med hög vattenanvändning i områden med begränsad vattentillgång. En av dessa industrier är textilindustrin. Vid textil beredning är vattenförbrukningen mycket hög och avloppsvattnet är ofta mycket förorenat. Vattenfrågorna inom textil produktion har fram till idag inte uppmärksammats i lika stor grad som arbetsrätts- och kemikaliefrågorna.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is reinforcement of poor subgrade by usinggeogrid soil reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.