Voluntary organisations provided the first consumer guidance in Sweden. The government'sinterest in the question started during the second world war and has ever since increased.Since the 1970's the local authorities, with support from the community, have played animportant roll in consumer policy work. Due to the economic recession of recent years theappropriation to consumer guidance work has been cut down. The work has been rationalisedand libraries have more frequently been used to spread consumer information.In Stockholm the municipal has been responsible for local consumer information since the1940's. Co-operation with the library of Stockholm has occurred in different forms.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

Dagens grafikkort är uppbyggda av kraftfulla multiprocessorer som gör dom ypperliga för att hantera parallelliserbara problem som skulle ta lång tid att utföra på en vanlig processor, så som exempelvis level-of-detail eller raytracing.Denna rapport presenterar en parallelliserbar level-of-detail algoritm för terränghöjdkartor samt implementerar denna för användning på grafikkort användande Nvidias CUDA API. Algoritmen delar upp den totala höjdkartan i sektioner som ytterligare delas upp i mindre block som beräknas parallellt på grafikkortet. Algoritmen räknar ut vertexpositioner, normaler och texturkoordinater för vardera block och skickar datan till applikationen som skapar vertex och indexbuffertar och renderar sektionerna. Implementationens prestanda och förmåga att reducera trianglar analyseras med två olika sorters culling-metoder; en metod som gallrar trianglar på sektionsnivå och en metod som gallrar på blocknivå.Resultaten visar att det är mycket fördelaktigt att låta grafikkortet hantera level-of-detail beräkningar på detta vis även om minneskopiering över grafikkortsbussen är ett problem, då det tar upp ungefär åttiofem procent av den totala tiden för att hantera en sektion. Beräkningarna i sig tar väldigt lite tid och det finns gott om utrymme för utveckling för att uppnå en så bra fördelningen av trianglar över terrängområdet som möjligt..

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

This report is the result of several interviews of employees within the field of pedagogy. The background behind this report is my period as a trainee in one of the daily activities in Malmo. In daily activities the employers gets training, education and guidance in Marte meo, which is funded by public finances. The method, which this study focuses upon is called Marte meo. It is a method of communicating and developing the means for the participants to evolve their skills in communicating and increase self esteem.

Denna rapport presenterar ett alternativt sätt att ljussätta terräng i datorgrafik. Tidigare modeller har vanligtvis byggt på lokal ljussättning, som inte tar hänsyn till kringliggande geometri, och har med en extra process approximerat effekten av ljusinteraktionen. Genom att använda sig av en teknik som kallas precomputed radiance transfer (PRT) kan man förberäkna hur en punkt interagerar med ljus för olika inkommande riktningar och undviker därmed att göra detta under programkörningen. Det är viktigt att denna teknik även fungerar tillsammans med level-of-detail (LOD) terrängrenderingsalgoritmer eftersom rendering av alla trianglar i terrängen för varje skärmuppdatering inte är optimalt för dagens grafikkort. Man vill därför representera den underliggande terrängen med fler trianglar närmare betraktaren och färre längre bort.

The purpose of this study is that, based on expertise in special education tutoring, examine the degree of supervision demanded by teachers in primary schools. As a result of this study, we can see the views teachers have regarding guidance within the following issues: the demand for tutoring, the importance of conversation and reflection, and guidance from the specialist teacher.Since the study deals with phenomena of a qualitative nature, we use semi-structured interviews in the empirical part of trying to understand the informants' way of looking at the phenomenon we are investigating. The study included interviews with six teachers in the elementary school year?s 1-3. The results show that there are more opportunities than obstacles to mentoring.

Syftet med denna uppsats var att undersöka hur kön görs i sex stycken vägledningssamtal på gymnasiet. Med stöd av några utvalda könsteoretikers forskning analyseras samtalen som utförts av tre stycken olika studie- och yrkesvägledare på tre stycken olika gymnasieskolor. Varje studie- och yrkesvägledare samtalade med en tjej och en kille i årskurs tre och deltagarna valde själva ut vilka elever som spelades in på band. Resultatet pekar på att studie- och yrkesvägledarens förhållningssätt delvis skiljer sig åt beroende på elevens kön. Genom att undersöka samtalsinnehållet och jämföra detta med normativa föreställningar om kön så ges olika exempel på hur kön görs i samtalen.

To render outdoor scenes with lots of vegetation in real time is a big challenge. This problem has important applications in the areas of visualization and simulation. Some progress has been made the last years, but a previously unsolved difficulty has been to combine high rendering quality with abundant variation in scenes. I present a method to mathematically generate and render vegetation in real time, with implementation in the scene graph Gizmo3D. The most important quality of the method is its ability to render scenes with many unique specimens with very low aliasing.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

The purpose of this investigation was to study what students in in the first year of the social science program in high school think about the guidance they had access to during their time at primary school. This is to ensure that it the guidance students are entitled to and contribute to the development of the business. The survey was conducted at two different high schools in southern Sweden. A total of 57 students participated in the survey. The results show that 46 and 29 percent of students at the two schools did not feel they had the information they needed for their upper secondary school The results proving what previous research reached that students selection process can lead to stress and uncertainty associated with the choice to high school. The results of the present study showed that girls in particular have high standards for themselves and experience stress and anxiety associated with their selection to a greater extent than boys.

The aim of this study is to investigate the effects ofWork plan for study- and vocational guidance in Enköpings municipality 2008-2010 to see how it has affected the educators in the municipal primary schools. Questionnaires to teachers and interviews with principals have been made and it came out that the teachers are not very familiar with the plan. Of the few teachers who considered themselves to be familiar with the plan, the majority replied that they had benefited from the plan.The study´s analysis indicates that one of explanation for why so few educators are aware of and working according to the plan is partly in implementation efforts. Weaknesses are shown according to the equivalence of the implementation, but also the importance of the existence of an engaging and driven person, located at the primary schools, that continuously inspires and motivates the teachers to work with this plan. Educators also indicate that they already use study-and vocational guidance in their teaching..

Att studera på vuxenutbildningen kan innebära att du som studerande inte har möjlighet närvara fysiskt för vägledning på skolan. Orsaken kan exempelvis vara att du som studerande inte bor nära skolan, du arbetar eller har någon diagnos (exempelvis social fobi).  Syftet i studien är att undersöka vilken typ av kommunikativa medel som erbjuds sådana studerande. Examensarbetet är en kvantitativ studie, där 26 enkäter skickades via e-post till studie- och yrkesvägledarna hos utbildningsanordnare inom vuxenutbildningen. Resultatet visar att 18 utbildningsanordnare av 22 erbjuder vägledning för dessa studerande, samt att det finns variation i de kommunikativa medel som används för vägledning.