The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

The title of this study is: The Swedish assimilation of Scania during the period 1658-1720 - In descriptions of Danish and Swedish popular historians` during 20th century to current view. View of history, nationalism and science .                                                                                                                                              The study concerns the Swedish, after the conquest of Scania 1658, attempts to induce feelings of Swedish nationality to the people in former Danish province of Scania 1658-1720. The goal of this study was to analyze 20th century and present Swedish and Danish historians? descriptions of the Swedish and Danish treatment of the native Scania population. The aim was further to describe this historians` view of native rebellious group called ?snapphanar? and which measures were taken to assimilate the Scanian population to Swedish realm.

The collective agreement contains many important provisions concerning the relationship between employers and employees. When a collective agreement applies in the workplace, both employers and employees are bound by it. However, only employers of those two, can take part in the collective agreement, and therefore negotiate the content of it.The purpose of this study is to answer the following question: Why are rules that has been interpreted in collective agreements not expressed in writing? Therefore, the Swedish collective agreement system will be examined, and a distinction between types of silent regulations will be made to find causes. The potential for workers to act on a collective agreement with quiet regulations will also be examined.Collective agreements are signed on three levels: central, union and local levels.

Millesgården is a museum on the island of Lidingö outside Stockholm. It contains the buildings which were the home and studios of the artist Carl Milles and his artist wife Olga. It also contains the grounds that originated as the garden of their home. Carl Milles later developed the garden into a sculpture park where a great part of the sculptors works are on display. In this report only the sculpture park is treated.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The title of this study is: The Swedish assimilation of Scania during the period 1658-1720 - In descriptions of Danish and Swedish popular historians` during 20th century to current view. View of history, nationalism and science .                                                                                                          The study concerns the Swedish, after the conquest of Scania 1658, attempts to induce feelings of Swedish nationality to the people in former Danish province of Scania 1658-1720. The goal of this study was to analyze 20th century and present Swedish and Danish historians? descriptions of the Swedish and Danish treatment of the native Scania population. The aim was further to describe this historians` view of native rebellious group called ?snapphanar? and which measures were taken to assimilate the Scanian population to Swedish realm.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

This is a study of some risk factors for Diabetes Mellitus (DM) in dogs. As a pilot study it is meant to give information to be used in a planned later, larger and better controlled study. The present study hypothesized that suboptimal feeding (high percentage of homemade and table foods), lack of activity and overweight contribute to the risk of DM. Twenty consecutive dogs diagnosed with DM at the Veterinary University Clinic in Uppsala between 2000 ? 2003 were chosen as the experimental group.

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

Concept - detail - buildingStockholm International Fairs, new main entrance I studied at the KTH School of Architecture from 1995 to 2000. After completing my studies I wanted to work in an office that had a structural way of thinking and that knew the building process; I therefore chose to work for Rosenberg Architects. I have worked on a number of projects, among them several for the Stockholm International Fairs, from the Rica Talk Hotel and Hall AE, to the new main entrance.In the projects we undertook at the School of Architecture we had to identify and draw details that were central to our concepts. I have here identified some key details that we considered to be essential for the concept in a built project; the new main entrance of the Stockholm International Fairs completed in 2013. The entrance has complex logistics with multiple intersecting flows: exhibitors, employees, journalists, VIPs and others.

This essay aims to emphasize and clarify the positions that exist within the current globalization debate. The positions are the neo-liberal, the opponents, the pragmatists and the skeptics. The text presents and explains their ideological, moral and political positions and beliefs about the world, the nation state, the society and the individual; in light of Steven Lukes? and Antonio Gramsci's theories regarding the interaction and the relationship between power and hegemony. The methodological starting point is the ideology-critical analysis; in which their arguments in the current globalization debate is highlighted and categorized.

MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.