In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.

Problem Faith in the power of advertising has varied largely through the ages, and since we know that advertising is paid for, it therefore has less weight than the usual news. Publicity through promotional activities is in turn difficult to control. The question which of these two ways to communicate with the market that is the most effective, is equally entitled to ask, as difficult to answer. Purpose/Aim This paper is designed as a pilot study with two different objectives that go hand in hand. The first overall aim is to investigate how advertising and PR / publicity can be measured with the same tools while designing this metric.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

Title: Share anything Swedish ? a study of CommunityOfSweden.com (Share anything Swedish ? en studie av CommunityOfSweden.com).Number of pages: 57 (64 including attachments).Author: Daniela Brandel.Tutor: Else Nygren.Course: Media and Communication Studies C.Period: Fall 2008.University: Division of Media and Communication, Department of Information Science, Uppsala University.Purposes/Aims: To learn what happens when the public-private tourism organisation VisitSweden starts an online community, where anyone is free to post stories and photos about a Swedish experience, and to understand how a participatory culture can help an organisation develop relevant material and thereby reach a wider audience.Material/Method: The study is an analysis of VisitSweden's community CommunityOfSweden, its structures as well as VisitSweden's use of the information posted by the readers on the community. Hence the material consists mainly of content from the community www.communityofsweden.com and the webpage www.visitsweden.com. In addition, the study is also based on an interview with VisitSwedens communitydriver Tommy Sollén.Main results: Members of CommunityOfSweden help VisitSweden to promote Sweden. This is possible because the community posting format and the participatory culture within the community are well designed and planned by VisitSweden, even though the organisation was not completely sure about the outcome.

We studied the initial process of reading, with a focus on typography, whether it ispossible to increase childrens lust to read in the age six to seven years old, byadjusting the typography and graphic design. We conduct this study through qualitative and quantitative studies, mainlyinterviews with a main focus on children in this particular age were used. In additionto the interviews a questioniare were sent out to a selection of students. The studyalso contained an interview with a pedagogue as well as studies of the current andexisting textbooks and teaching aids that is used on the school we are looking into.During the study we consulted educated pedagogues to get an understanding of thechildren and their learning and to be able to approach them in a suitable way.The theories we have been using were mainly from a typographic point of view.Other areas we explored were theories about reading processes. This study showedthat every child needs a method that is suitable for them and that the materialprovided today is typographically inconsistent. The childrens and teachers needs andwishes in typography did not correspond with the current teaching aids design. From this study the followning points were made about how to design a textbook forchildren in the first grade:? The typeface should be a sans serif.? The point size should be bigger than 12 points.? Text should be aligned to the left.? Sentences should be short without becoming abstract.? To maintain focus on the text the layout should be simple and unbarked.? The format should be designed after the pourpose of the publication, forexample when it is a complement to the textbook, the format should be of suchcharacter that it is easy for the children to bring home.? There should be a typographical consistency through all of the materialsprovided to the children..

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

The aim of this study was to investigate and describe conceptions that been used when people talks about grapples and to put together parameters that the customers sees as important when they chose a grapple from Hultdins. Every year Hultdins manufacturer and sells about 3500 grapples around the world. With so many users its difficult to oblige everyone. To get an apprehension of what kind of grapple the operators wanted a formula with 18 questions was made. For the interviews 20 forestmachineoperators were choicest who had experience from Hultdins grapples, a lot of them also had experience from other grappleproducers and constructions. The study showed that it is the durability the users give priority to.

On the internal market within the EU, freedom of establishment under articles 49 and54 TEU stipulates that companies have the right to set up businesses in other MemberStates. On the internal market there are 27 different national tax law systems whichhave caused obstacles regaring taxation between Member States. These obstacles havebeen shown deterrent when a company enters a new market. One problem area is thelack of cross-border loss compensation for groups. This means that cross-bordergroups is over taxed when they are unable to set of gains against losses.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

Despite the fact that society is investing substantial resources in individuals not to relapse into crime, then relapse is still a large percentage of new crimes. Crime is something that all societies are dealing with and at all social levels. By punishing individuals they are excluded from the society. This serves as a form of social control. It has been shown that there is no solution to the problem.

Many Swedish urban neighborhoods have since they were constructed suffered from a bad reputation and have had a lack of strong socioeconomic groups settling there. This study is about a suburb in a medium-sized Swedish town and the purpose is to find out which social problems that exist there. The aim is also to explain the actors who work with adolescents in the area, which interventions and activities are offered, and whether they can be characterized as pro-social, as well as how the cooperation between the actors looks like. A qualitative approach with semi-structured interviews was carried out, involving nine respondents, who are active in the public and nonprofit sector. The interview guide used is designed and divided into different themes based on the survey questions.

The role distribution between designers and product coordinators and the system support between these roles are adapted according to the method of working that product models primarily are created for production and after sales market. At the same time models are also created to support a cross-functional way of working. This means that product structures exists on paper and as CAD-models before they are created in Scanias PDM-system environment which leads to unnecessary work and to information not being shared as early as it should be possible.A theoretical study has been performed with the purpose of understanding the problems and to create a foundation for improvement suggestions. Representatives from both roles have been interviewed together with other individuals with insight in the collaboration. A minor study concerning the roles of interests? collaboration at Volvo CC was also performed to be able to relate the study to another company.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.