Municipalities must establish budget annually but they are free to decide how the governance should be designed, this can lead to lack of consistency and measurability within and between municipalities. The purpose of this thesis was to present a proposal for a unified and more measurable financial structure of a municipality where this was lacking. In our theory we describe the issues of traditional management control and we introduce an alternative control with non-financial ratios included, called the Balanced Scorecard. In the empirical data it is investigated how the governance of a municipality could be designed, according to the respondents. In the analysis the information gathered to reach the answers to what are considered to be useful governance in municipality, are examined. In the conclusion, we design Balanced Scorecards with both financial and non-financial ratios to the councils of the municipality..

To efficiently examine volumetric data sets from CT or MRI scans good volume rendering applications are needed. This thesis describes the design and implementation of an application programming interface (API) to be used when developing volume-rendering applications. A complete application programming interface has been designed. The interface is designed so that it makes writing application programs containing volume rendering fast and easy. The interface also makes created application programs hardware independent.

The purpose of this literature review was from dairy cows? behaviour and welfare point ofview describe how feed bunk and cubicles in a loose house system should be designed. Todaydairy cows in Sweden and in the world have high demands because of a high milk production,stress and higher risk of being afflicted with diseases. Through selection in breeding the bestquality can be performed, but high demands of the environment for the dairy cow is above allalso important for a good welfare and for a good milk production. Feed bunks and cubiclesare just some parts to be designed in the best way for a good animal welfare.

In this study it has been investigated what is missing in non-strength training women to begin exercise regular strength training. It has also examined the level of knowledge about the health benefits and the employer's encouragement to maintain good health. The study was designed in a qualitative methodology and data collection was designed in form of semi-structured interviews. Six women were interviewed between the ages 22-51år. The results showed that women possessed a very low level of knowledge about strength training and also fears and prejudices existed among them.

The purpose of this study was to examine whether urea could be an option as a nitrogen source for young cattle, the study was limited to risks related to feeding, growth and feed efficiency. Microbes in ruminants have the ability to convert nitrogen to protein, this has been highlighted by beef producers as they are in search of cheap protein feed resources. Urea can be a worthy source of nitrogen for growing young animals, because of its high nitrogen content and the low price. Studies have shown that the replacement of a portion of the total protein content by urea in diets with low content of crude protein, like corn silage, may improve animal growth and feed efficiency. Replacement of all the true protein with urea can result in reduced feed intake and microbial growth.

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

Since their invention in 1999, CubeSats have become a widespread standard for small picosatellite missions. CubeSats allow for quick development of satellite payloads and launch in space without the high costs of a normal satellite. Emphasis during the CubeSat design process is placed on use of commercialoff- the-shelf (COTS) components and reuse of previously-designed units.This report describes the interfacing of a scientific magnetometer, the Small Magnetometer in Low-Mass Experiment (SMILE) to such a CubeSat mission, the Space Weather using Ion spectrometers and Magnetometers (SWIM). Design of a complete platform for use in multiple such missions is presented here.Modularity is one of the key aspects followed in the course of the work. A new board containing the analog pick-up and compensation circuitry for SMILE has been designed to fit inside a CubeSat frame.

Web pages are visited through a variety of different devices with varying screensizes. One method for adapting web pages to this variety is called responsive design. Geographical information, often in the form of embedded maps, is common on the web. The combination of responsive design and geographical information has been shown to lead to interaction problems and is therefore assumed to need special considerations. This thesis examines this combination and investegates how presentation of geographical information can be adapted to responsive web design.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

'Hir in the box' is a study about the gender perspective in packaging design and how it is today. The study deals with the product category razors, for both women and men, to examine and compare products with the same function but with different designs. Based on an analysis of how packages are designed for different sexes, information should be given on how gender-neutral packaging can be designed and used in the future to reach the market. The purpose of the study is also to contribute to future research on the subject. To fulfill the purpose of this study, nuanced and in-depth data is collected by means of a small-N-study and a qualitative study in the form of open group interviews where the survey units are reviewed and discussed.

Zero knowledge protocols is a lesser known type of protocol that can be used for identification. These protocols are especially designed not to reveal any information during an identification process that can be misused later on, neither by the one who should be convinced of the identity of the user, nor by anyone else that is eavesdropping. Many of these protocols are also especially designed for implementation in smart cards. The more common type of card with a magnetic stripe has during the last few years become more susceptible to attacks since they are easily copied. Smart cards combined with a secure identification protocol has been predicted to be the solution to this problem.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The aim of this thesis was to examine what expressions for objectivity there were to identify/find in newspaper journalism?s report about the FRA-law during the period 2008-06- 13 to 2009-10-14.We choose to analyze ten articles from the morning paper Dagens Nyheter and Svenska Dagbladet, five from each one. The method we used was a qualitative text analysis. We then designed an own model for the objectivity ideal from without the old theories that were available and also came with own ideas. Then we used that model as starting-point and designed key points to identify objectivity in the articles.Our thesis showed that the articles often fail when it comes to two key points.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.