In order to decrease the disturbance from a cable testing equipment, the company Ericsson Network Technologies in Falun determined to design a new series resonant test system with a lower frequency. The new equipment is of series resonant type with a system frequency of 500 Hz. This equipment consists of an inductor, a capacitor and a voltage source. The voltage source is the same as the old one, the cable acts as the capacitor but the inductor has to be designed especially for the new equipment. In this thesis work several air coil inductor types were examined.

Teachers and special education teachers play a vital role in the creation of a study environment that fosters productivity in students. The current study aims to further expand the knowledge regarding teacher?s perception of common work with developing an optimal study environment within the classroom and the educational institution. In order to achieve this, qualitative interviews have been performed and study results analyzed according Nilholm´s model of the three different perspectives on special education: The critical perspective, the compensatory perspective and the dilemma perspective.The study results show that the concept of order and study environment is not clearly defined among the interviewees. However, the concept appears to presuppose the teacher?s responsibility to create the sense of security and effective study environment to those students who express the wish to educate themselves (Children make the things right only if they have been shown the correct way to do it).

This paper discusses the feeling of insecurity in educational exhibitions. The study analyzes one exhibition at the museum ?Nordiska Museet? in Stockholm, and strives to answer how the question of spatial factors can influence the feeling of insecurity, and thereby also the information process.The following questions have been addressed: Can we speak of a spatial allocation problem of exhibitions that contain much information? What is the relationship between the exhibition's intention and visitors conduct A model has been designed with influence from wayfinding where the exhibition is divided into basic parts, which allows a detailed study of the exhibition, and of how the parts relate to each other. The research contains spatial analyze, observations as well as interviews.The conclusion is that we, in the scientifically investigated exhibition, can speak of a spatial allocation problem when the information seems to be an overload for the visitor..

SAMMANFATTNINGNatriuretiska peptider är en är en grupp proteiner som via natriuretiska, diuretiska och vasodilaterande egenskaper reglerar vätskehomeostasen i kroppen (Levin et al, 1998). De frisätts bland annat när hjärtmuskelcellerna utsätts för stress och kan fungera som biomarkör för att utvärdera hjärtsjukdom. Analysering av typ B natriuretic peptide (BNP) i blod kan komma att vara till hjälp för den praktiserande veterinären vid diagnostisering av hjärtsvikt och även vid uppskattning av grad av hjärtsjukdom. Det har även visat sig att BNP kan användas för att uppskatta prognosen hos hundar med kronisk klaffdegeneration (Chetboul et al, 2009; Moonarmart et al, 2010).Kronisk klaffdegeneration är den vanligaste hjärtsjukdomarna hos hund och drabbar fram för allt små till medelstora hundar från medelåldern och uppåt (Kogure, 1980). Atrioventrikulärklaffarna, vanligtvis mitralis, blir nodulärt förtjockade med inlagring av glukosaminoglykaner och fibrosvävnad vilket leder till klaffinsufficiens.

Immersion is a construct that measures how deeply engrossed a user is with any mediated situation. In the field of game design, immersion is a significant aspect of what makes a game enticing, and as such it is of pivotal importance to create and maintain it to keep the player's mind off the real world while inside the confines of a game framework. According to the GameFlow theory, it is one of seven key tenets of evaluating and implementing a successful game design. Yet, certain multiplayer online games are designed in a fashion that in some cases seem to break immersion, where the player is frequently put out of action, sometimes for minutes on end. In this study, using online questionnaires, we discover that players, despite claims otherwise, seem to be in several ways affected negatively by this breaking of immersion.

Quadrotor UAVs are self-stabilizing, autonomous flying machines that has recently become more popular than ever. Unmanned Aerial Vehicles have their roots in the military, where they were developed for use in reconnaissance and combat. During the last few years, advances in the fields of electronic sensors, electric motors and microcontrollers have enabled smaller designs and autonomic flight control even for private use. The quadrotor, which is the particular kind of UAV we are looking closer at in this paper, has 4 rotors in an X-like formation. This configuration has many advantages such as good lift capacity, non-complex mechanical structure and serviceability.In this project we aquired a current overview of the domain and determine whether it is possible to construct a quadrotor UAV designed for use in a WISENET sensor network on a low budget and short time schedule.Based on existing community project AeroQuad, a quadrotor is constructed with a budget of about 500 euro.

The purpose of this paper is to bring a British mural painting that originated in England in the 1920?s into the limelight and introduce it to the Swedish public. The mural was commissioned by Tate Gallery, currently known as Tate Britain. The work of art was designed for a semi-public space as a decoration in the Refreshment Room of the gallery, located in the basement where there was little natural light. The artist, a young British man named Rex Whistler, was transformed from being a student at an art school into a celebrated professional artist by this piece of art.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The purpose of this study was to interview different groups of people (preschool teatcher, parents and theire childen) involved in preschool about their view on outdoor activity and children´s motoric development, and how a preschool yard should be designed to promote childrens development.All parties regard outdoor activity as very important for the development of children. They also think that the outdoor environment today is good but that it could be improved by including some trees and hills. The yard should also contain soil, sand, clay and water. The children prefer grass on the ground over other substrates. This study also gives good indications to decision makers how to build new or to reconstruct pre-school yards in the future..

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

Background: Commerce over the Internet has exploded in recent years. For many companies it has become a necessity to offer their products overthe Internet. This new market ought to change the conditions for relations between customers and suppliers. Purpose: Our aim is to describe and analyse the factors that influence the relations between customers and suppliers, from a customer view, when commerce is conducted over the Internet.Delimitations: The study is limited to B2B commerce with IT-products. Methodology: The thesis is based on a study of the company IMS, their e-commerce site and organisations that buy IT-products over the Internet.Conclusion: Internet opens up new possibilities for custom designed offers.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

This master?s thesis report is a summary of the analysis performed together with ITAB Shop Concept located in Jönköping, Sweden. As a last element of the Master?s program at the School of Engineering, this 20 point level D thesis project has been the final work to bring my education to an end.ITAB Shop Concept expressed an aspiration that the Shop Counter Program B10/B11 should undergo an analysis to point out and possibly lead to improvement.Through interviews and data collection proposals for possible improvements has been drawn up and the analysis points out current deficiencies. By following the idea generation, proposals to solutions for every individual problem is presented.