This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

Corporate Social Responsibility (CSR) issues have been received much attention in businessand management practises globally. Jensen & Yeh (2009, 3) state that ?The agenda ofCorporate Social Responsibility (CSR) has emerged as a factor in the process of globalization,and Chinese companies may sometimes feel pushed into this agenda without a clearunderstanding of the rationale behind it?. China?s textile and apparel industry, amanufacturing-based economy with its products bounding up with the consumers worldwide,has been facing enormous pressure to take CSR initiatives, particularly in relation toenvironmental issues and labor standards.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

Rising complexity in the development of real-time systems has made it crucial to have reusable components and a more flexible way of configuring these components into a coherent system. Aspect-oriented system development (AOSD) is a technique that allows one to put a system?s crosscutting concerns into"modules"that are called aspects. Applying AOSD in real-time and embedded system development one can expect reductions in the complexity of the system design and development. A problem with AOSD in its current form is that it does not support predictability in the time domain.

During my final examination project, I have been working with a design process to develop a new set of candle lanterns for the company Sagaform AB. This company has a large and significant role on the Swedish interior design and retail market. The assignment was developed when the company stated that they would like to supplement and expand its existing range of products. The research and surveys I have done have helped me to create eight different concepts and one of them ready to compete with the existing candle lanterns on the market. The result of my concept proposal expected to be included in Sagaform?s 2013 spring catalogue. During the project I have developed 3D-rendered images, a physical model, and a solid foundation for making prototypes. The Balloon has an attractive design language that fits both every day and more festive events.

Den här rapporten behandlar frågeställningen om hur man kan anpassa systemutvecklingav ett informationssystem enligt livscykelmodellen till att inkludera användbarhetstester. Frågeställningen grundar sig i att god användbarhet inte är ett explicit uttryckt mål i Andersens beskrivning av livscykelmodellen. För att besvara frågeställningen har vi utvecklat och testat ett bokningssystem åt en mindre verksamhet. Utvecklingsarbetet har bedrivits enligt en egen anpassning av livscykelmodellen. Testerna har utförts enligt metoden cooperativ evaluation.

In this study we are seeking to discover the norms in the design of logotypes and how they havechanged over time. To achieve this we have chosen to analyze the logotypes of twenty companies withthe largest expenditure on advertising in Sweden. We mapped chosen design attributes within the logoto discover the similarities and then we selected the five oldest brands to analyze how their logos havechanged over time. The design changes in the logotypes over time is can be related to the changingattitudes of the general public and the designers ambitions to draw on convention to create iconic designthat will spark brand-recognition. However many changes can?t be directly explained through changesin convention.

The study addresses the field of design as a profession and examines the views on strategic management in a design project among nine selected graphic designers. The graphic designers who participate in the study are permanently employed at design companies in Stockholm. The study has a qualitative approach and the method is based on face-to-face interviews. We have chosen to examine this subject due to the opinion among professionals that strategic management in the design industry has increased during the last decades. There is a belief that strategic management in some cases are used too extensively as a way for design companies to make more money.

The aim of this study has been to describe the ongoing region enlargement process in the region Mälardalen, located in the east part of Sweden, and to investigate how this process can affect the local level. The study is especially orientated on public communications and accessibility. The intention has also been to examine how the local accessibility can affect the re-gional development in Mälardalen. The local investigation object that has been chosen for this research is the city Strängnäs, situated in the province of Södermanland. The city of Strängnäs and the cities in it?s near geographic surroundings has been the benchmark for this casestudy, in which the local accessibility with public transportation has been investigated.

Examensarbetet inom produktutveckling ? konstruktion utfördes under perioden februari till juni 2013 och omfattar 15 högskolepoäng (C-nivå), och är den slutliga kursen inom högskoleingenjörsprogrammet Innovation och produktdesign.Examensarbetet behandlade problematiken kring produktionsanpassning och kostnadsoptimering av två stycken elektromagnetiska omrörare vid företaget ABB, Process Automation, Metallurgy i Västerås. Efter kontakt med handledaren från ABB, Jan-Erik Eriksson, påbörjades projektarbetet med att tillverkningsanpassa konstruktionen av produkterna ORD 43P och EM Stabilizer.För att åstadkomma kostnadsoptimerad och produktionsanpassad konstruktion tillämpade författarna följande produktutvecklingsverktyg: Design for Cost, Design for Manufacture och Design for Assembly. För att kontrollera att konstruktionen blev optimal, men också att den inte brister under belastning använde examensarbetarna det datorbaserade hållfasthetsverktyget finita elementmetoden i CAD-programmet SolidWorks.Val av komponenter baserades på komponenternas pris per kilo.För att välja det optimala materialet, det vill säga högsta hållfasthet till lägsta pris använde författarna materialdatabasprogrammet CES EduPack. De utvalda materialen från programmet kunde inte författarna påfinna som standard på marknaden, varför författarna ändrade strategi till att jämföra och välja material utifrån marknadsundersökning av standardmaterial hos leverantörer.  ORD 43Ps komponenter optimerades konstruktionsmässigt gentemot befintliga komponenter och härvstag och isolerplattor kostnadsreducerades markant.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

Learning organizations and organizational development are interesting subjects that does not examine municipal organizations and private organizations an equal amount.  Furthermore, there exists little research on the effects of competence development for individuals in a leadership role within organizations. Because of this, we wanted to examine the impact of competence development in business modeling and how it affected local government activities. Competence development is used by organizations to develop their business and achieve a greater competitive advantage, but does competence development for individuals in a leadership role lead to organizational development? This paper examines competence development in the form of a business modeling course via the Bitstreamproject and the effects that occur within three municipalities as a result of the competence development. By interviewing three participants and four coworkers within different municipalities and studied the data from the Bitstream project, we can not conclude that competence development within business modeling leads to organizational development, only that it exists a tendency for it.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

Den här uppsatsen handlar om rörelsen intelligent design, som tror att en intelligent skapare ligger bakom stegen i evolutionen. På så vis blir inte evolutionen en slumpmässig sak, utan en sedermera intelligent designad evolution. Den här intelligenta skaparen är med andra ord Gud. Uppsatsens ämnar  undersöka intelligent design och gymnasieskolan, närmare bestämt hur ID korrelerar med didaktik. Rent konkret är syftet med uppsatsen att se hur man i de centrala didaktiska frågeställningarna bemöter intelligent design i religionsläroböcker på gymnasial nivå.