The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

This master thesis is developed based on the desire of the water and sewage department in the municipality of Karlskrona. The department, which vouches for the quality of produced drinking water and sewage cleaning, was in need of help dealing with risk analysis.The water and sewage department is obliged to identify and assess risks according to Swedish legislation. However, no guides for this purpose regarding safety, health, environment and quality were available. The aim of this report was to accomplish a guideline for the performance of risk analysis within water and sewage plants. If the guideline is used, the requirements in the legislation will be obtained.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Spotify is a music service that offers on-demand streaming and is available in several countries worldwide. As the company and the interest for it grows, more and more parties are involved and those involved, including the record labels want to control and get an overview of their products. They want to be able to see, for example, when a product is available on Spotify and in which countries.Spotify is in May 2013 in process of developing a to be used by administrators on Spotify in order to meet the record labels with the information requested. The new software intends being used by administrators but also by the record labels so that they will be able to overview their products availability.We were asked by one of the developers to conduct user interviews and tests to result in a design proposal on how the display page of information about a product could be visualized more clearly so that it suits both record labels and employees at Spotify. The results of our contextual interviews were translated into a prototype with two display pages.

I denna rapport ställs frågor beträffande hur Viaplays streamingtjänst kan se ut i framtiden gällande TVOD och SVOD genom nya designlösningar. För att göra detta har en människo-centrerad designprocess använts för att undersöka attityder och beteenden kring TVOD. I undersökningen utreddes det hur konsumenter ser på TVOD och kombinationen med SVOD. Vad vill användarna ha, hur ser deras vanor och beteenden ut gällande hyrfilm i sin helhet?Examensarbetet har gjorts på plats hos Viaplay och med hjälp av Viaplays designteam.

This pilot study examined whether treatment with Vortex Process Technology (VPT) of the irrigation water used on tomato (Solanum lycopersicum) plants had any effect on plant growth. In a block experiment, with two blocks comprising 12 vases containing 1 L water and two tomato plantlets, treatment in which, nutrient solution was based on Vortex-treated water was compared with an control using untreated water. All vases were kept in a static aerated culture system in a daylight chamber for four weeks. The results showed that the effect of the two blocks exceeded the effect of vortex treatment in terms of leaf area and weight of fresh and dry matter. Plant height, stem width and internodal length were significantly different in tomato plants grown in Vortex-processed water compared with the untreated control.

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

When a combined heat and power plant produces heat and power it often faces a deficit of heat load during the summer or other periods of time. This heat is often unnecessarily cooled away or the power production has to be reduced or shut off. If it is possible to store heat from periods with low heat demand to periods with high heat demand one can get many benefits. Among these benefits are: increased power production, decreased operation with partial load, uniformly distributed load.To be able to store heat in situations like this long-term thermal heat storages are needed. In this thesis five different types of stores are presented: rock cavern storage, tank storage, pit water storage, borehole storage and aquifer storage.

This study describes what impact activity within Wifstas, Matfors,Grönstas and Nolbys water protection areas have on the quality of the drinkingwater. It considers the use of the area, environmentally dangerous activitiesin the past and present, the geology?s part, what harm hydroelectric power damsmay cause if they break and how climate change might affect the area in thefuture. It also takes into consideration activities outside the waterprotection areas which might have a suspected impact on the water quality. Theresults of the study are that pollution from infrastructure such as roads, orwastewater from treatment plants may cause occasional contamination of thedrinking water, foremost due to flooding.

During the nineties, ecological handling of urban storm water became very popular in Sweden. Together with Chalmers University of Technology and two Swedish communities, DHI Water and Environment has been doing research of storm water ponds and constructed wetlands. This thesis work is a part of that research project. The work has been applied at the Bäckaslöv storm water treatment plant in Växjö, Sweden. The plant consists of one storm water pond and a downstream constructed wetland.

The thick shelled river mussel (Unio crassus) has a fragmented distribution in southern Sweden. It is a threatened and protected species. In both the Swedish red list and the IUCN Red List of Threatened Species Unio crassus is classified as Endangered (EN). Causes for this classification are for instance differentiated bottom substrate and deterioration in water quality. In this study, habitat preferences of Unio crassus were investigated to assist in future restoration work.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

This thesis is performed in cooperation with Prodelox AB and JTI (Swedish Institute of Agricultural and Environmental Engineering). The purpose of the project is to generate and develop a WC-technique with a closet sewer that keeps a higher TS-substance than 1.5 %. The WC-technique is mainly directed towards permanent households in sparsely-populated areas and cabins. The goal is to generate concepts of toilets with an extremely low use of water in terms of flushing. The design should be appealing and touch more senses than only the visual.

The sound part is mainly practical and is dependent on concepts that have been tested through measuring with a sound level meter. The design part is more theoretical and has been verified with CAD models and finite element analysis.With a sound damping hood on the compressor the sound level is reduced with up to four dB. An optimized absorbent for the compressor space gives a reduction with three dB. By using the insulation for the heat water tank as absorbent we can see a sound reduction on the lover octave bands. A reduction like this is elsewhere hard to achieve as at it requires thick absorbents.By changing the today?s insulation to the heat water tank to a form of polystyrene polymer insulation the weight from the heat pump above can be transferred to the stable heat water tank.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.