This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

Den här rapporten förklarar tillvägagångssättet för framtagningen utav en responsiv design till webbplatsen Projects & Staff, en webbplats som tidigare hade en fixed design. Projektet består utav två leveranser, hi-fi prototyper skapade i Adobe Illustrator och Adobe Photoshop samt en färdig mobilversion utav webbplatsen, utvecklad med CSS3. Under projektets gång har jag designat för användarupplevelse och användbarhet, två områden som är viktiga inom responsiv webbdesign. Jag har utfört en förstudie i form av en webbplatsanalys, gjort en PACT-analys samt användarintervjuer. Detta för att definiera behoven som fanns för en responsiv design, samt att få en tydlig bild av användare och deras vanor.

Membrane bioreactors (MBR) combined with biological phosphorous treatment (Bio-P) has been investigated if that could be an alternative to the future expansion with conventional active sludge treatment at Lundåkra wastewater treatment plant (WWTP) in the proximity of Landskrona, Sweden.The results showed that the surface demand in the biological treatment will be reduced with 67% with the MBR-alternative compared to a conventional activated sludge process. The nutrient removal in the MBR-solution was decreased or unchanged for nitrogen-, phosphorous- and organic parameters. However, the energy demand will increase with an estimated cost of approximately 1 million SEK annually. Moreover, the extra chemical consumption is estimated to cost 370 000 SEK annually.The disturbances caused by filamentous bacteria such as sludge dispersal could be resolved with MBR-technology because the membranes are not affected by these organisms. The Bio-P process combined with MBR-technology works if the wastewater recirculates from the membranes to an aerobic zone.In the proposal, there will be a new pre-treatment step, for instance hole screens.

The purpose of this paper is to investigate the existence of the discipline Design Thinking in a project that aims to strengthen Sweden as a brand. The study will generate knowledge about Design Thinking, with the purpose to increase the understanding of how the discipline can be used as a strategic tool in the processes of strengthening Nation Branding. The authors have used a descriptive and qualitative approach where the Shanghai World Expo in 2010 was examined. The theoretical framework contains previous research in the field, data has been analysed in relation to Lockwood's ten principles of how an organization can become more design-minded and Anholt?s hexagon, which features the parameters that creates a country's Nation Branding.

The aim of this project is to find a concept solution for a wireless transmitting system, installed to transmit data from a hydrophone of the ocean floor down by a wave power generator to the office on shore. The project is a literature review in which previous observations and tests are analyzed and put together to find a solution. The result was a comprehensive solution that includes an acoustic modem to transfer captured information from the bottom to the surface, wirelessly through the water. The information is then sent fron the surface on radio waves through the GSM network to the office on land. Between under and over water there are components to convert information between acoustic waves and radio waves, but also various types of modulation, such as amplitude and frequency modulation is required..

The purpose with this article is to give examples how to remain and in a long run develop a higher interest in maintenance activities and knowledge. First reason is the changed age-distribution with more number of older employees among maintenance personnel staff and second reason is demand for education due the increasing demand in environmental responsibility.In spite of there is a lot of knowledge of maintenance in national organizations of interests it will not be used in a sufficient extent in many companies. This knowledge is an important base to use to re-built the missing or loosed skills in companies. The national organization UTEK is involved in European projects to validate knowledge of maintenance. Lost of or bad maintenance activities will always affect on the environment.Establish a network between companies is a good way to exchange information in their common business areas.

This study shows how to plan a pond with an ecosystem which although it will have turtles living in it will not need to be cared. I will also demonstrate how this pond would be designed to work in the natural landscape on Mallorca. The background to the study is that I am interested to investigate how plants that we in Sweden are using as indoor plants are growing in their natural landscape and how to build a land-scape with them. The study highlights different cleaning-systems that can be used to clean a pond in a natural way. A comparison will be made between the conditions of an exterminated turtle-species which will live in this environment and a species that is easier to care for.

Aqeri has since the past year a new profile with name and logotype, which has createda need for an updated visual product identity. The company is a leading developer,producer and distributer of IT products suitable for extreme environments in industry,defense and vehicles. This new profile with the different segments has together with aproduct identity from two companies resulted in that they have no clear designidentity on their products. From this background the aim of this research is todetermine how a development of a design identity is done to implement it to Aqeri.The design identity can be defined as a product?s identity visualized through its formor appearance which defines what the product is.

Rules for damages that are effective are important to create legal security and a public procurement that fulfil economic effectivity. Those rules are effectivly created for example when the demand of evidence is possible for the damaged supplier to fulfil. Yet the rules cannot be too low without leading to an uncertain procurement for the public purchaser. Thus one have to balance the interests of a public purchaser against the interests of a damaged supplier. This balance leads to a public procurement involving rules of damages where the public purchaser cannot escape duty of damages just because the demand of evidence is too hard to fulfil..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

Design är en stor del av vårt samhälle. Som studenter på slöjdlärarutbildningen vid Göteborgs universitet har vi upplevt att design får en allt större plats i undervisningen. Studien undersöker vilka kopplingar det finns mellan design och slöjd och hur man kan arbeta med det i skolan. I studien har 10 designstudenter vid Göteborgs universitet och Linköpings universitet blivit intervjuade. I studien användes kvalitativa intervjuer som metod.

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

Every year the Swedish government invests capital in different projects. In recent years the Swedish government has chosen to invest in design. The reason for this is that the government wants industry to use design as a competitive source. Two organizations, Svensk Form and Stiftelsen Svensk Indistridesign, have been assigned to improve industry and society?s under¬standing of design.

Individual cellulose ?bers were studied to identify the transport and absorbtion phenomena as well as the in?uence of drying. A Chalmers University of Technologydeveloped method within ESEM (Enviromental Scanning Electron Microscope) has been used in this study. The results from the laborations gave the following conclu-sions: The transport of water occurs in ?bers in the ?ber wall surface and the lumen.

Crisis communication in today's society is an important element for organizations. Whether an organization makes it through a crisis, good or bad is largely based on their crisis communication work. Crisis communication is about how the organization works to repair or maintain the organization's external image, the image that society has about the organization. When a crisis occurs stakeholders lose confidence in the organization or change their mind about it.This case study is about exploring how a municipality handles crisis communication through the various phases of a crisis. The study is also to examine how the municipality communicates with its stakeholders in specific communication channels during a crisis.The case study makes use of theories circulating crisis communication, such as: theories of how crisis communication should be handled, how a crisis is recognized, the different phases of a crisis, the communication channels that can be used and who may be interested in an organization when a crisis reveals itself.