This study presents an alternate viewpoint to the strive to overcome the gap between research and practitioners within paper prototyping in interaction design. Earlier research identifies three aspects of this gap, which is:Practitioners being unaware of interaction design methods and theoriesPractitioners being aware, but choosing not to apply these methods and theories, due to time, budget and constraints of labourPractitioners and research having different perspective on similar design issuesOur study was done by carrying out qualitative interviews with interaction designers based on two digital design bureaus. One of the bureaus has an expressed link to research: the other has not. Our hypothesis is that the gap would manifest as a difference in work practice between the two bureaus.Our study shows that the two bureaus have similarities in work practice and that this work practice is based on scientific methods and theories, but is adapted to fit the client and/or the project. We conclude that the overcoming of the gap might not be necessary.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

This is a graduate work at the Swedish University of Agricultural Sciences, The Department of Urban and Rural Development, Ultuna. The purpose of this paper has been to find out and describe principles for designing parks that offers good recreational and aesthetical values and require little amount of carbon dioxide emissions during their maintenance. The purpose has also been to see if it's possible to use city wastewater in some extent to assure the plants water supply and to find other means to make it less necessary to use purified water for watering. Recently made studies as well as older ones show how important green areas are in dense city structures both from a health and a climate perspective. Trees and other plants adsorbs different forms of air pollution and can also lower the temperature in the surrounding area through their transpiration.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

Ett utvecklingsarbete av en miljövänlig färdigmatsförpackning, lätt att öppna för reumatiker, har utförts i samarbete med CC Pack i Tibro. Förpackningen är tänkt för bruk inom äldrevårdens hemtjänst. Utvecklingsarbetet utfördes genom främst fokusgruppsundersökningar och tester av funktionsmodeller. En livscykelanalys med referens i dagens plasttråg som används på hemtjänsten i Skövde har utförts för att ta reda på vilket av de två slutkoncepten som var mest miljövänlig. Tydligt vid intervjuer och studiebesök var att en rundare och mer färgglad förpackning önskades.

Rapid urbanization causes competition over land use between green area preservation and urban development in cities and greatly affects ecosystems as well as human well-being. This conflict is significant all around the world as many cities are now replacing existing green areas with new developments. The area around Dag Hammarskjöld's väg in Uppsala is currently experiencing the same conflict, as the need that the city has for new housing represents a threat for the many valuable green areas that are in the site. The purpose of this project was to understand how the need of urban development and the preservation of green areas could be balanced. This understanding would thereafter be used to make a design proposal for the area around Dag Hammarskjöld's väg.

Starting out as a minor form of amusement, the game industry has become one of the most lucrative andsuccessful in the entertainment business competing against giants such as television, movies and music.As the internal competition within the developer community grows companies work hard at discoveringnew ways to attract and keep customers. By having a playcentric approach focusing on user experiencethey hope to achieve that goal. This thesis describes the process of designing a game with focus on theplayer. We apply the concept of flow on game development and investigate through research throughdesign if we are able to create a game that keeps the player in flow.Play tests showed several elements such as control issues and too difficult challenges early in the game,affecting the possibility for players to experience flow while playing. These negative factors came to becalled flowleakers.

Sustainable design - a study on sustainable design and its incentives and barriersThe purpose of this study was to investigate the incentives and barriers existing within companies focusing on eco-design. The aim was also to examine the consumers? thoughts on eco-design and sustainable products. A further aim was to try to concretize important lessons for future work on sustainable production and consumption. Two methods were used for completing this study; a literature study and a practical study consisting of interviews with companies focusing on eco-design and a survey among students.

Denna rapport beskriver processen av skapandet av en webbaserad säljpresentation av en av företaget PROSK8?s planerade produkter. Målet med presentationen är att skapa nyfikenhet och förtroende genom visuell design och ska fungera som ett verktyg och stöd för företagets presentatörer vid möten med investerare. Centralt för denna process är upplevelsedesign, varför utgångspunkten för arbetsflödet bygger på Jesse James Garretts modell av ?The elements of user experience?.

The Sitting while waiting for sustainability project goal was to make a functional model for a resting chair and to make it by using furniture and artefacts as material. A try of understanding the process of re-design and to use it to design was driving the project through. The result was a prototype made out of a bed frame and 18 pair of jeans and with details made out of leather..