In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

In April 2010 Vägverket (the Swedish National Road Agency) andBanverket (the Swedish National Railway Agency) will merge intoTrafikverket (the Swedish National Traffic Agency). Trafikverket willassume unified responsibility for the risk management that atpresent is responsibility of Vägverket and Banverket separately. Atpresent, as it will be shown in this thesis, Vägverket and Banverketshare the same theoretical background for risk management but usedifferent implementations often within the same agency. The use ofdifferent implementations results in a reduced transparency of therisk management both within and outside the agencies: this willbecome even more problematic when they will be fused intoTrafikverket.The aim of this thesis is to review the current risk managementmethodologies used at Vägverket and Banverket and to suggest aunified tool for the risk management at Trafikverket. This will bedone by focusing in particular on construction projects, one fromVägverket (Partihallsförbindelsen) and one from Banverket(Nynäsbanan).

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

Bakgrund: Smärta är för intensivvårdspatienten en unik, subjektiv, obehaglig och flerdimensionell upplevelse. Intensivvårdssjuksköterskan har ett moraliskt ansvar att lindra patienternas smärta. Verbalt icke-kommunicerandepatienter kan inte skatta sin smärta med hjälp av Numeric Rating Scale (NRS). På en neurointensivvårdsavdelning (NIVA) i Stockholm har det beteendebaserade smärtskattningsverktyget- the Critical-Care Pain Observation Tool (CPOT), implementerats. Intensivvårdssjuksköterskorna på NIVA använder CPOT dagligen i sitt arbete.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The purpose of the study is to highlight educators' preferences and attitudes towards tablet in preschool by describing the use of this digital tool in the preschool educational activities. The use of tablet in preschool is in the study looked upon as a phenomenon. The description of the phenomenon is built on the analysis and interpretation of educators' statements about it. The research questions focus on the following aspects: educators' attitudes towards the tablet and its use in pre-school educational activities, the tablet's current area of use, the culture surrounding the use of this digital tool and the educators? statements about advantages and disadvantages of tablet's use in preschool.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

Det här arbetet preciserar ett problem utifrån ett problemområde som faller inom ramen för användarcentrerad design. Den preciserade problemformuleringen är: I vilken utsträckning kan ett gränssnitt göras användbart genom prototyping, aktiv användarmedverkan och iterativ utveckling genom användningen av en modifierad version av ISO 13407 standarden som ett utvecklingsramverk? Den här frågeställningen har tillämpats och avgränsats till ett pekskärmsgränssnitt vid namn Navigator som är utvecklat av Asko. Resultaten visar att de gränssnittsprototyper som har skapats är användbara. Vidare visar resultaten även att det inte är tillräckligt att enbart använda tre nyckelprinciper för användarcentrerad design i syfte att uppnå användbarhet..

Information and communication technologies (ICT) are constantly evolving in today's information society. The school uses ICT as a teaching tool and it begins to be included at the leisure-time in school by the educators.Aim of this study is to examine how educators describe their perceptions and experiences of using ICT in the leisure activities. The questions is about how the educators use ICT, what they believe children learn of ICT, and which advantages and disadvantages they see with ICT at leisure-time in school.Through a qualitative approach, I have had my questions answered by six trained educators, five of whom are recreational educators and one who is a preschool teacher. These have individually answered my interview questions as an interview took place over a phone call, while the others answered the same questions by e-mail. The interview questions were open-ended questions that were formulated so the educators could respond so freely and fulfilling as possible.The survey shows that teachers use ICT in multimodal approach at leisure-time in school, both in informing parents and in activities with the children.

The objective of this project was to develop an application for mobile phones using the Android operating system. The main goal was, with the help of GPS, to pinpoint locations, measure distance traveled and illustrate the progress on a map. Functionalities for just showing the map, fetching addresses and saving to a database was also implemented. The result of the work was a proper application, called MeasureApp, that fulfills the goals set in the planning stages of the project. MeasureApp can be used to measure distances where accuracy is not a main factor, i.e walks or runs.

The purpose of this essay is to examine the relationship between visual communication and female homosexuality within the field of magazine design. As the creative part of the project I have chosen to make a redesign of Lotus magazine, the very first Swedish magazine with lesbian and bisexual girls as the target audience. The questions of which the project is based on are: Which stereotypes, differences and similarities can be found in visual communication addressed to a heterosexual versus a homosexual target audience? What kind of design attracts non-heterosexual girls and how can I create a design for Lotus magazine that is appealing to lesbian and bisexual girls and yet still makes it possible to compete with traditional girls? magazines? In order to examine my research questions I have done literature studies within the field of gender and sexual identity in relation to visual communication. Additionally, I have analysed the design of competing magazines on the market and conducted a survey among representatives of the target audience of Lotus magazine..

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design 21 hp.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.