Floating housing is a concept gaining ground in Sweden. The dwellings are different in many ways from traditional homes, not only regarding flotation, but also several other technologies. The purpose of this thesis is to emphasize the qualities that exist in living on water. The ambition was to present a proposal for a floating residential area located in Jönköping, containing homes of varying sizes, and to present their technologies. In order to find inspiration and solutions studies have been made on existing floating homes in Stockholm and Kalmar, focusing on their technical and functional solutions.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

This paper reports a study on the usability of e-commerce accessed through smartphones. There is much research in the usability of mobile interfaces and many sets of design patterns have been created but a few studies are available for specific domains, and in this report we focus on mobile e-commerce. In this study a framework is developed for how to design mobile e-commerce interfaces with a high degree of usability. Furthermore, the study also contributes a method to how other specific domain can develop a framework with general standards to work from when creating a web interface. By examining two sets of design principles and 14 design patterns, we evaluate which ones are critical in the design of a mobile e-commerce interface for achieving a high degree of usability.

Jag har i mitt examensarbete skapat ett cykelmärke. Syftet har varit att fördjupa mig i grafisk design och skapa en komplett grafisk profil till ett företag och samtidigt att lära mig mer om hur man skapar en varumärkesidentitet. Det konkreta målet var att ta fram tillräckligt mycket material för att cykelmärket, komet, ska kunna lanseras på riktigt. Alltså ett identitetsprogram med grafisk profil, en provcykel, kommunikationsmaterial, en hemsida, en katalog, ett event etc..

Universal Design is a well established methodology with the fundamental purpose of designing products to be usable for as wide audience as possible, without the need of special adjustment to suit the individual. In this essay, Universal Design has had a clear influence in both the process and the result. The choice to use Universal Design as methodology in this usability evaluation, has essentiallv to do with the target audience.As a part of the design process of MyTobii C8 has Tobii Technology ask for a usability evaluation. MyTobii C8 is an 8" touch screen computer with a windows based operating system which will initiate the software MyTobii C-Series Control. MyTobii C-Series Control is the control panel for MyTobii C8, whose interfaces constitute the platform for various modificarion of the unit.

Projektet har gjorts för företaget Björn Borg med inriktning mot design management och designstrategi. Arbetet delades upp i två delar, under den första delen genomfördes research på såväl Björn Borg som på ämnena design management och designstrategi, i form av litteraturstudier, intervjuer och observationer. Detta ledde till att ett problemområde identiferades och att en ny produktutvecklingsprocess utvecklades genom designstrategiskt tänkande. Den andra delen behandlade hur två exempel- produkter utvecklades genom den framtagna processen för företaget. Slutsatsen blev att den nya processen skapar ett mer förankrat designarbete hos företaget som kommer att ge ett mer fokuserat uttryck på marknaden..

Detta examensarbete behandlar hur individers mål, ståndpunkter och attityder kring ett föremål kan användas i föremålets design för att individerna lättare skall kunna identifiera sig med föremålet ifråga samt betrakta det som eget och/eller vänligt sinnat. Denna metod för design av föremål testades genom design och modellering av ett stridsfordon, vilket sedan utvärderades i en enkätundersökning tillsammans med ett redan existerande västerländskt stridsfordon. Syftet med undersökningen var att undersöka vilket av stridsfordonen som målgruppen ansåg vara lättast att identifiera sig med/framstod mest som egen.Undersökningen visade att stridsfordonet som designats med tanke på målgruppens  mål, ståndpunkter och attityder också i större utsträckning upplevdes  som vänligt sinnat/egen..

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

It is important that the current urine separating systems are evaluated to allow improvements to be made and consequently increase their future propagation. In order to increase the knowledge about urine separating systems this study was made. It included, among other things, measurements of amounts of urine as well as of the composition of urine collected at Nytorgsgatan 4 in the city of Hallsberg. The study was increased after an inquiry that also included the district of Understenshöjden in the city of Stockholm. In the inquiry, the users were asked questions about odour, cleaning of toilets and occurrence of blockages in the urine water locks etc.

Syftet med detta arbete är att undersöka hur dynamisk svårighetsjustering påverkar hur spelare värderar ett spels svårighet, presterar under en spelsession och huruvida de kan upptäcka ett system för sådan justering samt identifiera hur det fungerar.  Arbetet vilar främst på Robin Hunickes arbete kring dynamisk svårighetsjustering men vidrör även koncept som svårighet, flow och olika typer av svårighetsjustering. För att undersöka huruvida system för dynamisk svårighetsjustering påverkar spelande har ett plattformsspel utvecklats och speltestats i två versioner av en handfull respondenter, en version som justerar svårigheten i spelet dynamiskt och en som balanserats för hand. Resultatet från dessa speltester ger inga direkta stöd för att dynamisk svårighetsjustering får spelare att prestera bättre och tyder på att spelare vid en första spelomgång har svårt att identifiera system för dynamisk svårighetsjustering. Resultatet visar dock även på att mer undersökningar kan behövas på ämnet i framtiden..

Internet and social media have opened up new possibilities for companies and organisations tocommunicate their brand. It only takes a few seconds to communicate the message of a website to theuser. This indicates the importance of having the intended message of the website communicated clearlyin order to give the user a correct impression of the company or the organisation. When it comes to theconcept design of a website, it?s important that all different parts is presented uniformly.