Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22, 5 hp, 2014.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

For an outdoor environment to function optimally as a playarea requires that it is flexible, that is, contains places and elements that give room for the imagination and for own interpetretations, and also that the children in some way can influence and change their surroundings. It is also important to have variety, both in the sense that the playground has a unique character that distinguishes it from other places, and that it allows many different games and activities. There should for example be room for both wild games of running and moving around where many children can participate, and calm corners to withdraw to for rest or quiet play. A good playground should surprise, challenge and encourage children to discover their surroundings. One way to achive this is to use plants and materials from nature, whose irregular forms and structures can become interesting elements to explore. Vegetation also gives sence-experiences of various kinds, materials like twigs and leafs to play with and a place to play house.

In a recently published official Report from the Swedish Government (SOU 2010:73) a leg- islative proposal has been introduced. Its main purpose is to prevent parallel registrations of ships that are bareboat chartered to other countries. The legislative proposal claims that by preventing parallel registration of ships the Swedish Maritime Code will better corre- spond with the UN convention on the law of the sea.The UN convention on the law of the sea clearly states that ships are forbidden to fly two flags. There is however no restriction concerning parallel registration, simultaneously, in two registers. A ship that is bareboat chartered out from Sweden does not fulfil criteria re- quired in order to be deregistered, according to the Swedish maritime code.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22,5 hp, 2014.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

This report will outline a proposal for the improvement of the baggage sorting facility at Arlanda airport. Swedavia is a state owned company group that operates, owns and develops airports in Sweden. One of their main roles is to create accessibility needed to facilitate and streamline the work at the airport.Swedavia is constantly working to develop new solutions and enhancements that will help to standardize and automate the work at airports without major impact on climate and above all adapt these solutions to work.The project has been aimed to identify and isolate the problem at the check-in counter, investigate the possibility of setting a speed control on the DC motor driving the luggage conveyer belt at the check-in desk so that the luggage does not lose tracking already there, as well as evaluate the new sorting systems planned to be introduce in the upcoming refurbishment of the sorting area.To determine the parameters that are used to regulate the speed of the baggage conveyor belt, information about the inputs and outputs that participated in the process was gathered. Information was collected both practically and theoretically. Process was followed and monitored by the supervisor of the company, and a theoretical study was done separately on my own.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Detta examensarbete är en undersökning i kommunikation genom konst och design.Det är ett gränsöverskridande samarbetsprojekt vars syfte är att skapa en diskussion kring ett fortfarande tabubelagt ämne. Genom ett gestaltande arbete i textila material undersöks hur vi på ett kreativt sätt kan bidra till samhällsdebatten runt övervikt och fetma. Projektet resulterade i två textila verk som gestaltar den nya svenska kroppen. En textil skulptur i form av en överviktig dalahäst och en folkdräkt för den nya svenska kroppen. I vår gestaltning använder vi oss av dalahästen och folkdräkten som symboler för svensken.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.