This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

This work derives from the question ?What is a beautiful road??. The question is being discussed in interviews with two employees at the Swedish National Road Administration and two former members of the ?Council of environment and beauty? at the Swedish National Road Administration. The interviews are summarized in my own discussion about the concept of ?Beautiful roads?.

This project has been about making a design suggestion for a boat accessory that adjuststhe distance between a sail-or motorboat and the dinghy, which is connected by a rope inthe stern. Today this is all done by hand and can lead to problems when it comes tostressful situations such as harbors and narrow passages.A company called Sailsafe came up with the idea and the construction, which they alsohave tested. I found them through an acquaintance at Dacat AB where I did an internshipin the fall of 2010.Using sketching as the primary tool I?ve worked in an almost-real design project with theaim to develop my skills and give the company a relevant design suggestion. Dacat thenhelped me with a 3d model in Alias, which was printed in 3d and painted in thepaintworkshop at school..

Den här uppsatsen handlar om rörelsen intelligent design, som tror att en intelligent skapare ligger bakom stegen i evolutionen. På så vis blir inte evolutionen en slumpmässig sak, utan en sedermera intelligent designad evolution. Den här intelligenta skaparen är med andra ord Gud. Uppsatsens ämnar  undersöka intelligent design och gymnasieskolan, närmare bestämt hur ID korrelerar med didaktik. Rent konkret är syftet med uppsatsen att se hur man i de centrala didaktiska frågeställningarna bemöter intelligent design i religionsläroböcker på gymnasial nivå.

Boklund, Nina & Finnman, Ann-Sofie. (2007). En undersökning om läsvanor och läskultur på yrkesförberedande program ? ur ett sociokulturellt perspektiv. (A study about pupils reading habits on vocational courses).

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The process of producing a video game is one that goes through a number of phasesduring the span of the entire production. One of these phases is the concept design phase,which is part of the pre-production. This phase is an important aspect of the productionas it is where all the different parts and ideas concerning the game are brought togetherto define what the game is going to be. Though a clearly important part of the videogame production surprisingly little research have been done on the subject of conceptdesign. This thesis presents what place concept design has in the overall game productionand how the design process is handled.

This thesis describes the process of developing a reservation system for common resources through a TV-interface. The system is developed in cooperation with the company Dreampark and is built to work in their platform for TV, Dreamgallery. The main goal was to develop a reservation system and to make it work with Dreamgallery, to develop a demonstration version of the system. The thesis describes the approach for developing an easy-to-use and customisable program and interface for making reservations. How this is inserted into an existing program in a suitable way.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

It has been shown in various research contexts that action programs do not always work as they should, even though there are clear guidelines on how the action programs should be designed and used. The aim of this study is to illustrate which processes that occur before an action program as well as how these processes lead to action that will give the student the support he or she needs. Through qualitative interviews with eight teachers, I have tried to answer the questions that I created. I have tried to answer my research questions that I have made based on the purpose. The questions are; What type of inquiry will be done if a student risk to not reach the knowledge goals? How will the inquiry support the action program? In what way does the action program support pupils in special needs? The result of my survey show that the survey being done for an action program is very individual-focused and that the mapping rarely shows on the teachers role or school environment to students who fall into special needs.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This essays purpose is to accentuate the meaning of the knowledge of the design elements color, formand texture in the hair design education. Both the Bauhaus school and Pivot Point educationcampaign close knowledge in color, form and texture. In my study of the literature I compared theBauhaus school with Pivot Point International Inc, study material for hair design education. From thesimilarities in this material I develop a project in color, form and texture. This was a teaching test forstudents in the hair design education at the upper secondary.

Karlsson. A (2015). Importance of spirituality and social support for quitting narcotics - Experiences of the12 step program. Bachelor thesis in Public Health science. Department of work- and public health science.