Det ha?r arbetet syftar till att underso?ka hur man integrerar sin slutanva?ndare i designprocessen fo?r att go?ra dem delaktiga i slutresultatet. Hur man kan fra?mja ka?nslan av delaktighet, stolthet och engagemang fo?r sin ort genom ett gemensamt skapande..

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

The purpose of this study is to examine which aspects of blogs and blog design that are important to blog readers but also to find new ideas for blog design. From a qualitative standpoint we have examined how seven users experience that blogs design, structure and functionalities affects the general experience of the blog. The study also examines how the users wish to interact with a blog. During two design workshops we let seven active blog readers imagine and sketch out the design and functionalities they would like in a blog. We put this in relation to theories about the anatomy of blogs, methods of design, social navigation and virtual communities.The major finding is that the aspects most important to blog readers are navigation, structure and social interaction.

AbstractPurpose/Aim: The aim of this paper is to find out how the company Japanporten can improve their communication through their website. I want to find possible weaknesses in the communication style, and suggest solutions to those. All for the purpose of managing to create understanding and interest to fulfil the purpose and goal for the communication.Material/Method: I have used a qualitative research method, where I have interviewed the manager of Japanporten and made an contents analysis of their website.Main results: Japanporten supplies good functions on their website. The have a clear purpose and explain who they are and what the can do for the visitor. The main weakness is the argumentation to create and keep an interest from the visitor.

The case method is a relatively new pedagogical method in Sweden that is based on students exercising their skills in the analysis of complex situations and problems that are based in reality and that help students to see a broader perspective and context.The purpose of this study has been to investigate, through interviews with students and teachers, the advantages and disadvantages of the case method in teaching geography.The results of the study show that both teachers and students share almost the same opinion. The conclusion is that the case method is a didactic method that is well suited for teaching geography, as it is based on reality and develops the students? ability to analyze, argue and find solutions in several areas within the subject of geography. If a student is strong in these skill areas they can really benefit from the application of the case method in the teaching of geography, but for students who are weaker in these skills, the case method can be a disadvantage.

Ett entitetssystem är ett sätt att hantera entiteter i ett spel och är ett relativt nytt och outforskat område. Syftet med det här arbetet är att utvärdera två olika entitetssystem, en aggregationsbaserad design och en dataorienterad design samt bidra med hur en dataorienterad design kan se ut och realiseras. Entitetssystemen implementeras i programmeringsspråket C++ tillsammans med ett exempelspel som används för att utvärdera entitetssystemen. Entitetsystemens effektivitet uppmäts i uppdaterade entiteter per sekund och antalet cachemissar per sekund genom ett experiment med exempelspelet. Det dataorienterade entitetssystemet visar på mindre cachemissar och fler uppdaterade entiteter per sekund när det totala antalet entiteter och antalet entiteter som dör per sekund varieras.

Introduction. Infection Prevention is one of the surgical nurses' main responsibilities. One of the steps which patients undergo in this purpose before surgery is the preoperative skin desinfektion. Background. The patient washes the day before surgery with Descutan cutaneous sponge 4 %, a sponge containing chlorhexidine.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The purpose of this thesis was to develop and optimize a method of analysis for combustion of organic chemical products, followed by an ion chromatographic quantitative analysis. This was to be achieved with the decomposition equipment IKA AOD 1. The aim was to receive a precise and repeatable method that would be able to be applied to the process of qualification and technical marking of chemical products at the company, OKG AB in Oskarshamn. A complete instruction for the decomposition equipment and the method of analysis was written. A number of parameters were chosen from the general method of the combustion equipment, which then was tested parallel with a simultaneous development of an appropriate ion chromatographic method.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

AbstractMy purpose with this study was to learn more about different ways to teach children how to read and to investigate how teachers can use more fiction when they teach.During the years that I have been working in school, I have only met teachers who use a method that is built on sounds. The children learns to read from books where the words is not put in their right purpose; for example; we can se a sun, a dear looks down in a lake.After my teacher-education in literature I became more and more interested in if it could be possible to use more fiction when you teach children how to read. I also wondered if it was possible to find readers where the sentences are put in a meaningful story.I heard of a method called Whole Language, or the kiwi-method and I decided to find out more about that method. I decided to make a comparison between the ?sound-method? and the Whole Language-method.I have been using qualitative interviews with both children and teachers with experience from these different ways of teaching.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

Jag har i mitt examensarbete skapat ett cykelmärke. Syftet har varit att fördjupa mig i grafisk design och skapa en komplett grafisk profil till ett företag och samtidigt att lära mig mer om hur man skapar en varumärkesidentitet. Det konkreta målet var att ta fram tillräckligt mycket material för att cykelmärket, komet, ska kunna lanseras på riktigt. Alltså ett identitetsprogram med grafisk profil, en provcykel, kommunikationsmaterial, en hemsida, en katalog, ett event etc..

Universal Design is a well established methodology with the fundamental purpose of designing products to be usable for as wide audience as possible, without the need of special adjustment to suit the individual. In this essay, Universal Design has had a clear influence in both the process and the result. The choice to use Universal Design as methodology in this usability evaluation, has essentiallv to do with the target audience.As a part of the design process of MyTobii C8 has Tobii Technology ask for a usability evaluation. MyTobii C8 is an 8" touch screen computer with a windows based operating system which will initiate the software MyTobii C-Series Control. MyTobii C-Series Control is the control panel for MyTobii C8, whose interfaces constitute the platform for various modificarion of the unit.

Several theoretic and environmental psychological models establish a connection between the environment and the reactions of humans and the research support that there is a mutual influence between individual, environmental and behavioral factors. You often assume that a person both can influence and be influenced by the surrounding environment. This is evident, but it is less obvious how a given physical design influence people?s immediate behavior in the city. The aim of this study was to investigate if the physical design of a place influences people in an urban environment and to investigate how the behavior is influenced.