Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

I den ha?r rapporten har vi underso?kt hur man genomfo?r en re-design av logotyp och hur man kan fo?rmedla ka?rnva?rden genom grafiskt material. Vi fick i uppdrag ifra?n Hollies Reklambyra? att re-designa Hud & Ha?lsocenters ursprungliga logotyp samt grafiskt material. Det a?r inte ovanligt att fo?retag inte fo?rsta?r hur viktigt det a?r att ens grafiska profil a?r uppdaterad och fo?rmedlar det man sta?r fo?r.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

In healthcare settings, administrative routines have been made more efficientthrough digitalization of information and the introduction of stationary computers.This situation is especially true when it comes to radiology, where pictures,referrals and patient information now is completely managed by advanced stationarycomputer systems. However, studies have shown that these rationalizationsdo not support flexible and mobile work routines.PocketRIS is a prototype illustrating a mobile terminal for radiology that hasbeen designed to simplify workflow and reduce the cognitive workload of healthcarepersonnel. PocketRIS includes a visualization of the clinicians work situationincluding a personal referral list that can make the user attentive of importantevents.Contextual Design has been used to elicit the basic system requirements for thesystem; 19 contextual inquires was conducted with physicians, nurses and assistantnurses at two different radiology clinics in Sweden during six days. The purposeof the study was also to identify the groups that have the greatest need for amobile terminal. The study was concerned with design and evaluation of differentsolutions with healthcare personnel.The result shows that physicians and assistant nurses have the greatest need ofa mobile terminal.

In this project we have explored digital tools for service management on the bicycle paths of Malmö. This was done through the participation of citizens in order to attempt to discern how such interactions can be eased using a mobile app, as well as how this app can be designed in order to appear trustworthy with user friendly interactions. We have explored this field by using goal-oriented design through interviews, prototyping and user tests. We have created a digital prototype as a possible solution for how the interactions can be done. Throughout the process interviews were held and user tests with selected members of the user group. To explore the concepts we have used paper prototypes in order to establish the design and then defining the interactions with the help of a digital prototype. Finally we have concluded that a general app for bikers in the city would be functional and that a longer study in the effects of such an app would be interesting as a continuation of this work..

Old industrial sites bear witness of the unsustainable industrial developments in the past. Today many of them stand abandoned and empty, old structures lacking function in our present society. We have in this thesis participated in a visionary student competition arranged by IFLA, International Federation of Landscape Architecture by developing a proposal based on a vision of how Stockholm can stimulate a greener development. We have done this by turning an unsustainable industrial site in the city into an ecological node; Arboretum Lövholmen. Our aim is to develop an entry for IFLA?s visionary student competition by creating a new sustainable design for the industrial area of Lövholmen in Stockholm. We have worked with the following research questions: How can we create a visionary design proposal for Lövholmen that promotes sustainable development with the help of ecological design? How can the competition format be a design tool? How can the working process developing a competition entry progress? The competition demands have shaped our working process and functioned as a platform for the structure of this thesis.

A Large part of the education provided at colleges and universities of today requires for thestudent to be more independent in their studies. This demands that the physical space,where the students choose to study, is designed in a way that can encourage and supportlearning. It seems as though that many of the learning spaces of today don?t always meetthe students? needs. The university library at the University of Umeå is currently planningto design new learning spaces for the students.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Idag strävar de flesta företag mot att skapa användbara hemsidor med hjälp av olika designprinciper. Denna studie är en undersökning av designprinciper i syfte att belysa vilka designprinciper företag och organisationer tillämpar. Designprinciper är riktlinjer som används för att uppnå ett mål, det vill säga god design. Studielitteratur som använts i denna studie är ?Don´t make me think? skriven av Steve Krug. I boken nämns flera designprinciper som vi har haft till hjälp för att ta reda på om företag använder sig av liknande principer. Sex deltagande medverkade i intervjun som utfördes.

Web pages are visited through a variety of different devices with varying screensizes. One method for adapting web pages to this variety is called responsive design. Geographical information, often in the form of embedded maps, is common on the web. The combination of responsive design and geographical information has been shown to lead to interaction problems and is therefore assumed to need special considerations. This thesis examines this combination and investegates how presentation of geographical information can be adapted to responsive web design.

This paper researches how the palimpsest concept is used in relation to landscape, and how it can function as a tool within landscape architecture. Palimpsest originally refers to old parchment handwritings, where new text has been applied on top of effaced, but still discernable, earlier writing. Superimposition of information is the core of the palimpsest concept, used within a range of scientific as well as cultural fields. The purpose of this paper is to find how a landscape palimpsest can be distinguished among the many different layers of landscape, such as historical or cultural, and to examine the potential use of the concept in theory and practice of the landscape architecture field. The study is conducted as a literature survey, examining the use of the palimpsest concept within academic works related to landscape.

The residential yard at Kvarteret Landsfiskalen 1, in the area Herrgården in Rosengård, Malmö was built in 1971 and has since then been reconstructed twice, in 1984 and 2008. The yard is found in an area which was built during the years 1965 ? 1974, a period in which the swedish goverment approved a decision to build one million homes, and much of the events in this particular yard is also typical for the process in many other areas built during the same period.At the original construction the design of the yard was entirely incused by the pressure in time and finance, one was under at that time, in order to over- come the housing shortage. The design it has nevertheless been given, reflects the esthetic ideals of that time well.The building of the area was barely finished when the swedish authori- ties started handing out grants in order to support the rearmament of the outdoor environment in the areas built during the so called ?million program?.

During spring 2012, six students at the Royal Institute of Technology in Stockholm carried out agroup project in the field of mechatronics as part of the thesis for the bachelor degree. The resultwas a robot with active balancing and the purpose of this report is to describe the development,manufacturing and problems that arose during the project. The finished robot has two wheelsmounted in line with each other, like a bicycle. Measurement data from an accelerometer and agyroscope are used together in a complementary filter for determining the angle from the verticalplane. For balancing, a PID controller was used to control the rotation of a reaction wheel, whenaccelerating causes a straightening torque.

Jag har studerat och försökt att undersöka varför förpackningar av sexleksaker ser ut som de gör och i processen har jag också undersökt hur deras visuella kommunikation uppfattas och vad som eventuellt skulle kunna göras bättre. Anledningen till denna uppsats är att min uppfattning av förpackningar i sexleksaksindustrin är sexistisk, kränkande och framför allt består av dålig design. Jag redogör för litteratur som jag anser vara intressant för uppdraget och den behandlar både byggandet av varumärken och förpackningsdesign. En undersökning och intervjuer med experter kommer också att presenteras. Slutligen ger designarbetet ett exempel på hur en stilren förpackningsdesign kan vara svaret på frågan om hur man bäst kommunicerar förpackningen till en sexleksak. Uppsatsen är inte avgörande i den aspekten att den inte ger ett svar på varför paketen är utformade som de är, dock utvecklar jag vad några av möjligheterna skulle kunna vara.

This report describes the work process to an interactive movie addressed to children with neurodevelopmental disabilities, where Jippieserien is the client. The aim is to explore how multimodal media can convey Jippieseriens message to children with neurodevelopmental disabilities and their parents, by taking the users needs into account.It is important to focus on the people who will use the system when designing interactive systems. This project is therefore using the designprocess human-centered design for interactive systems. The process includes four basic elements and provides guidelines for user-centered design. These parts are analysis, prototyping, implementation, and evaluation (Johansson.