Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

In today?s competitive market, design is an important element for the companies. They must succeed with delivering an increased value and an experience for the consumer to be able to survive. The Swedish company?s have become better in the design area, the higher standards the consumer?s demands forces the company to invest more in design.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Trädgårdens hantverk och design, 22,5 hp, 2014.

Continuous improvement is one of five principles in General Motors ? Global Manufacturing System (GM-GMS). GM-GMS has been used by Saab Automobile AB since 2003 and is a central component for realisation of GM?s vision. Internal audits have discovered problems with one of the tools, practical problem solving (PPS), which needs to be improved.

Free Space Optics (FSO) has received a great deal of attention lately both in the military and civilian information society due to its potentially high capacity, rapid deployment, portability and high security from deception and jamming. The main issue is that severe weather can have a detrimental impact on the performance, which may result in an inadequate availability. This report contains a feasibility study for an all-optical free-space link intended for short-range communication (200-500 m). Laboratory tests have been performed to evaluate the link design. Field tests were made to investigate availability and error performance under the influence of different weather conditions.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

Detta examensarbete är en undersökning i kommunikation genom konst och design.Det är ett gränsöverskridande samarbetsprojekt vars syfte är att skapa en diskussion kring ett fortfarande tabubelagt ämne. Genom ett gestaltande arbete i textila material undersöks hur vi på ett kreativt sätt kan bidra till samhällsdebatten runt övervikt och fetma. Projektet resulterade i två textila verk som gestaltar den nya svenska kroppen. En textil skulptur i form av en överviktig dalahäst och en folkdräkt för den nya svenska kroppen. I vår gestaltning använder vi oss av dalahästen och folkdräkten som symboler för svensken.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This report is about the current outdoor environment in the housing area Brunnsbacken in the city of Eskilstuna. The report examines the various factors in the outdoor environment that can affect the physical and psychic well being of the elderly people through availability and inclusion. The research methods that are affected are qualitative and has been implemented in order to give insight and knowledge about the way elderly people view the outdoor stay in their neighborhood, but also through analysis produce an informed design suggestion..

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

The mission was to create a prototype of a menu system for the companySystem Andersson AB. The instructions were that it has to be as interesting andmodern now as in 20 years. We had to look at technology from the cutting edgeof development to make our prototype survive in the future. WindowsPresentation Foundation (WPF) was the technique we focused on. There areonly a few applications that take advantage of WPF today, but it is predictedthat WPF will be the next generation method for developing applications to theWindows platform.To make our menu visually appealing, easy to use and at the same timefunctional, we followed the clear path and guidelines that are available ininteraction design.

Det finns idag behov till en undervisningsform som på ett roligt och enkelt sätt engagerar studenter till att lära sig om design. Studenter är olika och behöver olika undervisningsformer.Problemet löses via ett brädspel som är kunskapsgivande vilket får studenter engagerade. Under tio veckor har jag arbetat med ett testbrädspel för designstudenter som ett komplement till designundervisningen. Jag har intervjuat folk om design och skaffat mig kunskaper om hur en yrkesverksam designers tillvaro kan se ut. Tester av spelet har ägts rum för att se om det är underhållande och hjälp har tagits av yrkesverksamma brädspelsutvecklare och lärare för speldesign.Resultatet blev ett koncept till ett brädspel där det går att rulla ihop planen i en papperscylinder eller vika planen till en låda för att lösa förpackningsproblemet.

This Bachelor Thesis in the area of Computer Science and Work Science describes the process of design and development of an IT-tool between the municipality of Ron-neby and TietoEnator a development and consultancy firm, the Gothenburg office. The thesis focuses mainly on the cooperation between the consultant designer and the local municipal. Through cooperation, the organisation is incorporated into the tool and the tool is incorporated into the organisation. Concepts that are central in this thesis are design, cooperation and tailoring. A question raised is, if distance work and extensive cooperation might be a good way of working in the process of design and development, when the organisation is being incorporated into the tool. Advan-tages and disadvantages of this way of working are discussed. Our studies show that distance work is a good complement for personal meet-ings between designer and co-developer.