This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

This essays purpose is to accentuate the meaning of the knowledge of the design elements color, formand texture in the hair design education. Both the Bauhaus school and Pivot Point educationcampaign close knowledge in color, form and texture. In my study of the literature I compared theBauhaus school with Pivot Point International Inc, study material for hair design education. From thesimilarities in this material I develop a project in color, form and texture. This was a teaching test forstudents in the hair design education at the upper secondary.

The aim has been to investigate and describe how gender-neutral design, concerning typefaces and colours, can be created. Based on my results I?ve designed a cover for a recipe-book to make it appealing to both women and men. I have been doing my research based on questions such as; Does feminine and masculine design, concerning typefaces and colours exist? And if so what characterizes it? Does gender-neutral design, concerning typefaces and colours exist? And if so what characterizes it? Is it possible to design a cover for a recipe-book in a gender-neutral way, concerning typefaces and colours? The first part of my research consists of a literature study based on keywords such as gender, graphic design, gender theory, typeface, androgynous, visual communication, colour, shape, feminine, masculine, and book design.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

The aim of this study was to design short interventions based on the literature study, which will change the pupils? posture on mathematics and connections between problem-solving in mathematics and everyday life. An experimental group of 17 pupils in fifth grade participated in the study and were educated in everyday mathematics 20 minutes a day during four weeks. The intervention was measured in a pre- and after questionnaire, in order to control the design and discover possible changes in the pupils? posture on mathematics and connections between problems and everyday life.

This study investigates if, and in that case, how design theory is applied in practice in the web development field. Prior research has focused on methods used in the web development field. We wanted to study the designers role in a web design process by comparing existing designer roles with design theory literature. We did qualitative interviews with two practitioners at two different communication agencies in northern Sweden. Based on our qualitative data and literature review we have concluded that a designer has to devote a lot of energy on requirements engineering in order to develop a clear understanding of the design situation..

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Detta examensarbete syftade till att utveckla ett koncept på en Rollator, ett gå-hjälpmedel för människor vars gång är funktionsnedsatt. Målet med arbetet var att förbättra utgångskonceptet med en smartare och mer tillverkningsvänlig design samtidigt som rollatorn får ett enhetligt design/formspråk. .

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Bygghantverk, 27 hp, 2012.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.