This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The aim of this paper has been to examine personas role in the development phase and whether or not some of the criticism that have aroused against personas is valid or not. In this paper we examine the benefits as well as the downsides of working with personas both from a scientific point of view but also from the experiences of a small company located in the north of Sweden. Since personas much like many other powerful tools have pit falls aswell as do's and don'ts this paper looks to clarify what role personas should take aswell as how to minimize risk and maximize the usefulness of personas..

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

SammanfattningLångvarig smärta orsakar stort lidande för individen och belastar samhället ekonomiskt. Syftet med denna uppsats var att undersöka om en exponering in vivo-behandling inspirerad av Dialektisk beteendeterapi (DBT) för människor med långvarig ländryggssmärta var görbar samt om behandlingen gav effekt på smärtrelaterad problematik. Designen var en single case experimental design vilket är en beprövad design för att testa nya terapimetoder. Studien bestod av sex deltagare, alla med hög grad av smärtrelaterade katastroftankar, något som litteraturen visat predicera sämre behandlingsutfall. Behandlingen var DBT-inspirerad och indelad i tre faser; en första valideringsfas, en andra färdighetsfas och en tredje exponeringsfas.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

To find competencies on a workplace with flex office structure.Companies today, 2012 are facing new opportunities and challenges. Information technology develops, competition is bigger today than ever, increased environmental requirements will be added and new patterns of life and values are occurring. This means that people who work in offices feel strong pressure of conversion, which is something that people experience differently. Therefore it is essential how the working environment is designed in an office. Working in an office means a lot of information processing and we can see large changes taking place.

Quality is the main focus in management of all laboratories. Accurate results of the analyses are not only determined by the analytical procedure but also by preanalytical factors. In the total analytical process of clinical specimens, there are many possible preanalytical sources of error. Monetoring of temperature on test samples of the transport boxes is one way to reduce the mistakes in the preanalytical phase.In this study, four laboratories from primary health care were invited to participate. The temperature has been measured on test samples of the transport boxes being delivered to the laboratory.In three cases the temperature remained within the limits, but in the fourth case the temperature varied more than the allowed interval.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Föreliggande uppsats har som främsta syfte att skapa en prognosmodell för bruttoregionalprodukten (BRP) för Sveriges 21 län. Behovet av en prognosmodell motiveras av att Statistiska centralbyrån (SCB) i dagsläget redovisar de definitiva siffrorna av BRP med två års fördröjning. Det kan därmed finnas ett intresse hos regionala beslutsfattare att få en uppfattning om hur BRP utvecklats under de två senaste åren. Metoden som används är bayesian model averaging (BMA), vilken kommer att utvärderas samt jämföras med två andra metoder: En multipel linjär modell som skattas med minsta kvadratmetoden där variabelselektion utförs med best subset selection (BSS). Den andra metoden är en tidsseriemodell och kallas här för en longitudinell modell (LM).

This is a final project which makes up 20 credits at the Landscapearchitecture programme at SLU in Alnarp. The thesis is design based. My final project is comprised two parts; of a competition entry for ? A New Square in the Centre of Täby? as well as a theoretical study that derives from the competition proposal. The competiton itself was announced on March 1st 2007 with the final hand-in date on May 28th 2007. The program of the competition asked for a flexible urban square that offers a diverse range of activities that can be used during both night and day, all year around. I became interested in the term ?mutlifunctionality? and I went on to use the subject as a base for my design approach.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..