The project aims to explore how strong brands are built and what they consist of. I will focus on the subject fashion magazine, ambassadors and the different parts that a magazine consists of. Based on the information from research and literature I?m re-designing the Swedish fashion magazine Solo..

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

?Boverket? the Design Regulations in Sweden, also called BKR has for a long timebeen the mandatory standard that has guided and regulated construction design. Butat the end of 2010 BKR was replaced with Eurocode. This report deals with thecomparison of these two standards when it comes to wood construction. Duringwinter 2009/2010 there were many roof collapses due to excessive loads on theroofs across Sweden.

Natural disasters are becoming more common due to climate change and it is important to adapt the society and its infrastructure to withstand events such as extreme rainfall. Precipitation is an important climatic factor affecting the transport and annually generates the cost of millions in damages, over the past 40 years heavy rain has increased and will continue to increase in the future. The extreme rainfall that occurred in Kramfors municipality in September 2013 led to flooding and destroyed several roads, including highway 90, which recently both had been rebuilt and given a new stretch of road. Extreme rainfall had also occurred in the municipality earlier.  The aim of the thesis was to examine how the Swedish Transport Administration handles new knowledge gained after natural disasters and how this is used in the planning of new roads.

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

It is becoming increasingly important for companies to meet customer demands due to intense competition in today's global market, that forcing companies to improve their offerings and become better at managing their supply chain (Shen et al., 2006).  Long lead times can be reduced by using different methods and strategies shows various researches. Lead times occur in the planning, production, inventories and handling of products (Treville et al., 2003).The aim of the study is to develop a method to analyze the factors that affect the length of internal delivery lead time in manufacturing companies. The method also included suggestions for reducing delivery lead-time to internal customers.The main factors that influenced the length of the on delivery lead times has summarized to make a selection among the factors that can have the most significant impact. The selected elements will be used as a method to analyze how these areas affect a company?s length on internal delivery lead times.The study shows that the causes of the long delivery lead times was the location of the customer order point, uncertain forecasts, long material and production planning time, and long waits in the production and storage.The delivery lead time, according to this report?s suggested improvements reduced by centralizing CODP and makes more reliable forecasts.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

The aim of this thesis in Archival Science was to explore the concept of electronic archives and the challenges that might be encountered when attempting to move archives into a new digital age, as well as having a closer look at the term e-archive itself. Another aim was to explore how the OAIS reference model works in practice.To explore these questions I decided to do a case study on E-Arkiv Stockholm, a functioning e-archive. I decided to do a study on several documents that were created throughout the project, these included documents related to the planning of the archive, as well as the final report. My reason for this method was that these docu-ments came straight from reality and would give a clear and unbiased view of the project and it?s many aspects.Examination of the documents showed that the OAIS reference model and its concepts had been the foun-dation of much of the planning.

This master thesis presents a Model for Evaluating and Managing Interruption Risks in connection with Business Continuity Planning (BCP), developed for Swedwood International. The model consists of a template with instructions. The model should be easily understood and useful for establishing a plan for BCP. This is achieved by including the contents and procedure of BCP and the main supplychain risks in the model. The purpose of a BCP plan is to describe how an enterprise will return to business as usual after an interruption, e.g.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

The concept of building work environment co- ordinator is a relatively new concept that has its origin in the amendment to the Working Environment Act which came into force on 1 January 2009. The terms; building work environment co-ordinator appointed for planning and design and building work environment co-ordinator for the execution of building or civil engineering work ushered in the industry. Once these disciplines complement one another, you can achieve a smooth handover to ensure a good and healthy working environment.In this thesis, we study a company in Uppsala and their operations and handover by interviewing the relevant staff in question. The result shows that there are currently no present guidelines for how and when the handover should take place, it is up to each individual to provide themselves with the relevant information.If the handover of the work environment would occur to the extent it should it would lead to minimized proportions of unforeseen risks and events that may occur during the production phase, which ultimately leads to a better and healthier working environment..

This is a bachelor thesis about arable land in Varberg, from sustainability and it?s relation to local government and management. Arable land has become more important as a natural resource from a global point of view and in concerns of higher demands of food supply, as a result of population growth, higher consumption worldwide and climate change. But the arable land in Sweden is being exploited an increasingly rapid pace and the arable land in Varberg is not an exception of this development. The issue is most topical and the discussion holds questions about a declining agricultural sector, the formal and administrative protection of arable land and because other interests of land use often is given higher priority in community development and planning.

This Degree Project is a cooperativ work with the advertising agency PAX in Falun and the industrial companyRemote Control, who constructs and sells actuators for the global market.The assignment concerns bringing out a graphic profile, or with another expression a Design Management, forRemote Control AB graphic materials. Remote Control AB has a quality certification ISO 9000 and is workingwith, when this report was wrote, an environment certification ISO 14001.The Company has been paid attention to Internet and other media.The supervisors are familiar to that Design Management is a soon coming competition element, like quality andenvironment management.This Degree project contains research, analysis and the construction of graphic material. The research has beencommitted most of the time to trace the customer, the market and the competitor, because its the most importantphase. It?s also important looking at competitor?s way of working with marketing management, so you can separatethem from the own company..