Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

A positive aspect of globalization, from a western viewpoint, is the growing demand of advanced products in China and other developing countries. The construction industry is thriving in China and Swedish companies have taken part in various projects. However the situation have been difficult for some of the companies. The aim of this study is therefore to investigate how strategic and cultural factors affect the potential for Swedish companies to operate on the Chinese construction market. The theoretical framework of the study consists of Porter?s and Kotler?s theories about strategy, and Hofstede?s, Bjerke?s, and Daun?s research about different cultures.

 Background: Euthanasia means help to die. Some terminally ill patients wish for euthanasia. Purpose: Illuminating terminally ill patients' desire for voluntary euthanasia. Method: A general literature study. Seven articles were reviewed and analyzed.

This paper deals with challenges associated with handling scrubber waste in the port of Karlshamn and what various industry partners are doing to meet this growing demand. The main challenges have been the proportion of ships with scrubber, the amount of generated waste and waste characterisation. An understanding of these factors has been crucial in order to ascertain the aim of this study, which has been made with calculations based on leading manufacturer?s scrubber analyses and with an estimation of the quantity of ships with scrubber by examining AIS data from the Port of Karlshamn. In order to calculate the quantity of scrubber waste two different scenarios were established, which in turn produced two different outcomes.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This study is based on a statistical analysis of fundamental key ratios on the Stockholm Stock Exchange during the period 2004-2012. In total 35 financial ratios of 90 companies were tested, ultimately five ratios remained within the 5% significance level. These ratios were ROA, P/B, Total Yield, EV/EBIT and Operating Margin. A custom made investment model was created based on the purpose to achieve a risk-adjusted excess return. The results in general did not show any significant difference in return between the model's portfolio and index.

Is accountability possible in global environmental governance? The purpose ofthis thesis is to examine if accountability is possible in global environmental governance. From an accountability perspective the thesis tries to illuminate global environmental governance. An investigation about the conceptaccountability is made and the thesis also illuminates the possible problems that exist in global environmental governance which exist of such a large amounts of different and often private actors. By investigating and examine the concept of accountability from different aspects and by using Global Compact as a example of global environmental governance the thesis try to answer if accountability actually exist in global environmental governance and in what way it is possible to demand accountability.

In Sweden has the temporary agency work industry settled in an explosive way since the deregulation of the unemployment agency monopole in 1993. The demand of civil right for the employer that is rented out confronts the entire labour law regulation with new challenges.The purpose with this paper is an investigation of the principle of equal treatment in The Swedish temporary agency work act and also to create a deeper understanding of the effects of labour and employment relationship. An investigation of relevant collective agreements will be done to highlight the difficulties the principal of equal treatment is exposed to. Further on is there a will to gain understanding for the wage concept and what possible can be included in the wage concept in relation to the principal of equal treatment in The temporary agency work directive. By using the dogmatic method, an approach to descriptive identifying relevant sources of law and clarify the legal situation in the area.In the conclusions it will be determined that the principle of equal treatment in The Swedish temporary agency work act have different effects depending on if the temporary agency or if the client corporation is tied to an collective agreement alternative if a collective agreement is completely missing.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

The forecast ability of four well-known exchange rate models for theSwedish krona is tested in this thesis. The models that are tested arethe purchase power parity, the real interest differential model, thesticky-price model and a productivity model. In addition to thebenchmark, the random walk, they are also compared to each other.They are all tested on three different horizons one quarter, two quartersand four quarters. The mean squared forecast error criteria and thedirection of change criteria are used for evaluation of the forecastability. Only in a couple of cases are the forecast ability of thetheoretical based models significant better than the random walk..

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements.