Our purpose with this research is to highlight that there is a scope for increased value creation in the experience room during concerts, and how value-enhancing strategies can be a competitive advantage for different venues. In our investigation of this we have worded the following research question: How is the perceived customer value affected during a concert in the experience room and its physical environment? With the background in this question we have identified three key concepts that we believe are the influence of the total concert experience which are; sensory experiences, interaction and identity. From these concepts we have drafted a number of propositions to test the reality by our empirical data collection. .

The product "urinal funnel" for women has fascinated me for a long time. Not only because it solves a practical problem in a simple way, but also because it challenges our definitions of gender and behaviour. This report describes the process of making a new design for a funnel, taking material, ergonomics and construction in consideration. It also includes structuring a launching of the product in Sweden. It starts up with a large amount of information gathering, both by interviewing testgroup-perticipants, but also by researching and evaluating the range of existing funnels.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

In a time where many Asian metropolises experience an expansive development new urbanconditions are created and the already existing disappears or being replaced. Asian cities develop ata pace that is unprecedented in our history and which, through a western perspective can seemharsh. By focusing on an urban complex in Chengdu, capital of the southwestern province ofSichuan China, the study asks; is it possible to see this rapid urbanization from another perspective?The study examines the local and global dimensions of Raffels City, and how concepts such asnostalgia and authenticity, related to the city, can be understood in an urbanization that is so markedby massive demolitions. The study shows that these concepts can be expressed in several ways, andthat an awareness of them does not necessarily control the view of the city..

In this essay my aim is to examine how the term utanförskap is constructed and defined as a social problem in the public arena of the Swedish Parliament. The term utanförskap was widely used in the election-campaign prior to the Swedish Parliament election in the year 2006. The term, mainly articulated by the Right-wing Alliance, was used to describe indi-viduals and groups that were depicted as being outside the Swedish society. In the political debate, work and benefit dependency were constructed as binary opposites, with the latter describing the individuals in utanförskap. Translated to English the term utanförskap would be something like ?the state of being outside? or ?outsidership?.

The purpose of this essay was to compare the Swedish and the Japanese pension system and see if there were any big differences or similarities. I was looking for answers to such questions as if the systems were modelled with the problematic demographic situation in mind and also how these two countries had tried to manage the problems. Path dependency was also a central conception when I studied the reforms of the two pension systems. I mainly used literature and Internet sources in my study. There were many books on the Swedish pension system and the debates that had been going on since the 80's.

This thesis describes the development ofa linear guidance system suited for NORCAN's aluminium profiles. The work took place at LP Innovation, a small technical consulting company, located in Uppsala. The work started with gathering and searching for information. A lot of the information was found in product catalogs, but my supervisor was also a great source of knowledge, as well as the other engineers at the company. I also had the opportunity to work with the rea lprofiles, to get a feeling and greater understanding how they were supposed to be used. With the use of sketching and CAD, a number of concepts were generated.

This report looks at the possibility of designing a universal adapter for Flat Blade windshield wipers in cooperation with European Automotive Supplier AB.To understand and see if this is possible, a research and an extensive patent search where done. Then to add structure to the project a Ganttschematic were developed. To generate good and solid ideas, different methods for product development were looked upon.When a method was chosen and applied, a series of concepts emerged. Now the focus was to design and construct all the pieces. The desired manufacture procedures were looked upon as well as materials.

I have done a comparative gender study of Library of Congress Classification from 1900 and 2001. I have also used a hermeneutic method and ideological critics to find out what picture of women the both systems shows. In my comparative study of the both systems I have found low update of classes which relates to women in the new classification system. Men seem to be a norm in the system, because men are not defined in classes related to both men and women. But many classes related to women are named Women as and Women in The study also shows that women are more related to subjects about family and marriage than men are.

This thesis was conducted at SverigeGrepen in Vänge-Körlinge, Uppsala, Sweden.SverigeGrepen is a family business that develops and manufactures a few different parts of different kinds of products. My task is to come up with a good idea that facilitates the coupling of trailers, i.e. from an idea to a fully functioning prototype. The product is intended for use by all customers for all kinds of trailers. The actual goal of the work is to develop a full prototype that you can install and use in the easiest way possible, a prototype that follows the specifications.

This paper provides an explanation of the concepts John A. Warden III describes regarding the use of air power and if this theory can be found, within the confines of an unconventional war. The U.S. ability to air power is overwhelming, however the right kind of warfare can force this great power to abandon their military and political objectives by exhausting its resources over time as it becomes increasingly costly, both economically, politically and morally, to wage war. The research deals with operation Rolling Thunder and John A.

Abstract Before the choice of upper secondary school in the ninth grade, young people need to have knowledge of themselves and the world. In this tough choice, the parents are the main support. The supporting role, which are their thoughts on how much they influence in their children?s choice of study? Based on these issues, we seek the answer to the question; which vision have the parents on their involvement in their children's choice of upper secondary school? Which visions have the parents on the impact on their children's upper secondary school? Do the parents think that the children's upbringing has influenced their choices? Young people's career decisions take place in interaction with their parents and with very different cultural, economic, social and symbolic capital. The concepts are Pierre Bourdieu's theory that intends to be our toolbox for this thesis.

SummaryAt the start of my employment at the Swedish National social insurance office I was a bit confused because there were two categories which I defined as belonging to the same category (working handicapped) but it wasn?t so. The persons I where going to meet was defined as having incapacity to work and therefore, they were defined as not standing to the labour markets conversion. They were defined as being to sick for being at the labour market. The aim of this work is to shed light on what grounds a decision concerning a person which will be categorized as incapable of working and looking at the categorized person?s status.