This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

Syfte med denna uppsats är att kritiskt granska och analysera Irving Janis begrepp groupthink samt bedöma om det är en hållbar teori.De frågeställningar jag valt att behandla är:? Vilken kritik har och kan riktas mot Irving L Janis groupthink teori?? På vilket sätt har groupthink teorin utvecklats sedan uppkomsten?För att besvara frågorna och uppfylla mitt syfte så genomförde jag en litteraturstudie där jag utgick från en kvalitativ ansats.Resultatet visade att sedan Janis myntade begreppet 1972 har kritiken främst riktats mot det bristfälliga stöd teorin fått, dess negativa utformning samt Janis snäva inriktning på när groupthink leder till fiaskon. Utifrån denna kritik och min egna analytiska förmåga kommer jag fram till groupthink teorin inte är att ses som en hållbar teori. Det sätt groupthink teorin utvecklats på är att den gett upphov till flera andra förklaringsmodeller när det gäller beslutsfattande i grupp samt att den verkat som en katalysator för detta område inom smågruppsforskningen..

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

A major issue that has been a subject for quite some time is whether there will be a scarcity of metals in the bedrock in the future and whether or not we might end up with a problem similar to that of the big oil crisis in the mid-seventies. Following the oil crisis many oil companies started up with risk management to control future risks. This work presents how Swedish mining companies work with risk management to handle risks that might come up in the future due to metal scarceness. How Swedish mining companies look at the possible metal scarceness and if they use risk management in their decision-making process is studied. By doing interviews with Swedish owned mining companies it was found that the mining companies did not see the future metal scarcity as a risk, even though 2/3 of the companies acknowledged the scarceness to be a reality.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

New laws and recommendations within corporate governance during the last years have affected the way board of directors work. The board is said to have and fulfill three roles: a control role, a service role and a strategy role. These roles could be understood by three theoretical theories: the agency theory, the resource dependence theory and the stewardship theory. The purpose of this study is to investigate whether, and if so how, the board work differs between two small firms based on these roles, given that one of the firms is a publicly listed firm and the other is a privately owned firm. Using a qualitative case study as research method we find that the board work differs between the two companies when it comes to these roles.

In this paper five different commonly used methods of making a mount for a costume in along term display was investigated: The shaping of a mannequin and a polystyrene dressstand, the making of a gypsum torso, support made out of plexiglas and polycarbonte and athree dimensional mount on a board. The materials of the mounts were thoroughly takeninto consideration and described in the paper. One of the methods was put into practice in acase study of a Russian uniform dress coat. A gypsum torso was considered to be the mostappropriate mount in this case. The dress coat was to be displayed at the Garnisons- ochluftvärns museum in Halmstad.

The Library of Uppsala University has decided to change their classification system from the Swedish SAB system to the American Dewey Decimal Classification. One of the main reasons for this decison was that Kungliga biblioteket also has made an exchange between these systems. Due to that, the national bibliography of Sweden classifies Swedish documents according to Dewey Decimal Classification and the SAB system is no longer maintained. A transition to Dewey Decimal Classification will enable Swedish librarians to import foreign catalouge posts and classification codes and will provide them with a common standard between their libraries and other libraries due to the use of the same international classification system. It is disputed whether the Dewey Decimal Classification is equally suitable for all subjects.

Application Lifecycle Management (ALM) is a genre of computerized systems which allows system development corporations to efficiently and more easily manage, maintain and handle the applications lifecycle. These ALM systems have a wide variety of tools which can be integrated to enable and support collaborative work, while they act at the core of the organisation. Todays ALM systems support flexible system development methods throughout the entire development process. This paper focuses on a case-study of a Swedish business- and technology corporation and their use of two ALM systems with an aim to unravel the differences between these systems and their functionality to serve as a basis for decision making regarding their utilization of best practice with their ALM-Systems. Meanwhile we studied their approach to ALM systems to see if they were using them according to the initial idea of ALM systems.

Goal: To describe which evaluation method is used by Swedish retailers to assess a potential retail location and to describe to what extent the retail brand effects this strategic decision. Design: Analysis of ten interviews with companies within five retail sectors in Sweden. Main study: Indication of what methods are used to evaluate a location and how a company's retail brand affects the decision. Results: Retailers use a mix of theoretical methods to evaluate the location attributes and possible profit. Most common among mixtures was an application of the analog method, residual method or the checklist method in combination with a financial assessment.

The creation of value is considered the core purpose and central process of economic exchange. Value creation is now conceptualized as shared by both producers and customers, and value is seen as fundamentally derived and determined in use, the integration and application of resources in a specific context, rather than in exchange, embedded in products and manifested as price. The field of research is abundant with publications but these do not fully further the understanding of value creation and co-creation in a way that is meaningful for theoretical development and decision making in business and marketing practise. Without a thorough understanding of the factors characterising value co-creation, the nature as well as content and locus of co-creation cannot be identified. In that case value co-creation easily becomes a concept without substance. Until now, individual publications on co-creation have focused on few or different aspects, have emphasized the process from either the customer?s or from  the firm?s vantage point, have different theoretical approaches and have ignored the complexity in interactions between actors.The purpose of this essay is to analyse how five fundamental aspects of co-creation of customer value are perceived in contemporary marketing literature. Discussing the different views on co-creation, this essay concludes that thoughthere are evident points of agreement, finding one generally valid doctrine of predestination or value co-creation is improbable.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

The purpose is to examine social workers view of vulnerable children and their needs. We are also interested to know how social workers think and discuss concerning the help these children are given. Our main questions in our study are; How do social workers define vulnerable children? Which needs do vulnerable children have according to social workers? Which opportunities and difficulties might there be in the decision making when trying to help these children? Which public authorities do social workers cooperate with? Which opportunities and difficulties do social workers find in the cooperation?This study is based upon interviews with ten social workers in the social childcare division in different municipalities in Skåne region, Sweden. Our results are explained and analyzed with a qualitative approach through different aspects of power- and Human Service Organization theories.

In Sweden we have the highest rate of nontraditional students among Europe. Coincidently, we also have the highest rates of drop outs among OECD. In this particular field, drop out from higher education, there is a need fore more qualitative studies that can support the "statistics". Studies about experiences of drop outs are significant for society, university and individual. The aim of this study is to describe and understand how nontraditional student experiences drop out from higher education.

One of sociology´s to assess the effects of political decision. According to sociologist Anders Persson the society is changing, and in that change social fear appear. In the reaction of social fear some people are being excluded. In that more narrow frame for normality laws are created that makes some parents and their children ?the other?. Nine years ago the sociologist Eva Kärfve published a book that was very critical to the newborn psychiatrics diagnosing of children as a way of segregating groups in society.