Sök:

Sökresultat:

596 Uppsatser om Death metal - Sida 35 av 40

Riskbedömning vid Saltvikens kopparverk

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

Market analysis for glulam within the Swedish construction sector

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Kons fertilitet : kostnader och åtgärder

To get a good economy on the dairy farms the fertility control of heifers and cows is a crucial factor. It is also important to know which key parameters that should be tracked. In this work well established routines for heat detection have to be applied. When the dairy farmers use technical aid in estrus control it is important not to forget that technical aids can not replace the human eye. Approximately 50 % of all opportunities to inseminate are missed because clear signs of estrus have not been displayed and/or recorded. The cattle fertility has been declining over recent years. During the same time the cow?s proceeds have increased, consequently applying a higher pressure on the cow and the manager.

Övervikt hos hund : andel överviktiga, riskfaktorer, konsekvenser samt hur övervikt kan förebyggas och förekomsten minskas

Obesity is the most common nutritional disorder, and is defined as an accumulation of excessive amounts of adipose tissue in the body. Obesity is a condition where an animal exceeds its optimum body weight by more than 10-25%. Risk factors associated with obesity may include breed, age, castration or high energy intake relative to energy consumption. The consequences of obesity are believed to be metabolic and hormonal changes, as well as cardiovascular and respiratory diseases, orthopedic problems, tumors and premature death. Prevention and early detection of obesity leads to better health care.

Selen och incidens av typ 2-diabetes - en systematisk översiktsartikel

Background: Type 2 diabetes is a disease which causes vascular damage, stroke and premature death.Oxidative stress may play a role in the development of insulin resistance and diabetes. Selenium is amineral involved in the protection against oxidative stress, and has been thought to be favorable in theprevention of the disease. However, this has changed since trials observed positive correlationsbetween high selenium levels and incidence of type 2 diabetes.Objective: To examine the studies that investigates seleniums effect on the incidence of typ 2 diabetesSearch strategy: Searches have been done in PubMed and Scopus.Selection criteria: Included studies were human studies in English/Swedish with RCT or cohortdesign with the aim to investigate the correlation between selenium and incidence of type 2 diabetes.Excluded studies were studies whose aim was to investigate the role of selenium in patients withexisting diabetes. Studies regarding pregnant women, animals or children and with in vitro design werealso excluded. Of the studies found in Scopus where MeSH terms were available, the ones who did notinclude relevant terms were excluded.Data collection and analysis: Studies were collected according to the aforementioned criteria.

Samhällsengagemang och utveckling inom svensk gruvindustri: En fallstudie på Boliden Mineral AB

Sustainable development has become more and more important over the past years. The term Corporate Social Responsibility (CSR) is closely connected to sustainable development and focuses on organizations responsibility towards the society and the environment in which it exists. Companies within the mining industry were among the first to initiate CSR-work due to the fact that they have a great impact at the local community, both socially and environmentally. Today they are still in the forefront of the development of CSR-questions in general, and community involvement and development in particular. Earlier studies made on this area have focused on the strategic level of community involvement and development.

Kan man genom kartstudier förutse häckningsframgång för ängshök (Circus pygargus) i Uppland? :

Montagu´s harrier (Circus pygargus) is a diurnal, Eurasian raptor, which migrates from its northern breeding grounds to winter in sub-Saharan Africa. In Sweden, its core breeding area is centred on the island of Öland, with a stable breeding population of approximately 40 pairs. The province of Uppland is on the northern end the distribution range, where 4-8 pairs have regularly bred since the 1980s. In Sweden, the Montagu?s harrier is classified as an endangered (EN) species. This classification is partly due to a lack of preferred nesting habitat, such as shrub-lands or dense wetlands with Claudium spp.

Emotionella sprickor och utbrott - i en sorg

Intangible feelings of sorrow and grief, caused by events like separation, death, loss and trauma, all leave some kind of traces in us and they play an important role in our development. The individualistic society here in Sweden has shaped us to keep our feelings inside and at bay; since our childhood we have learnt that showing emotions like tears, sorrow and sadness are signs of weakness and can make others and yourself feel uncomfortable. With the starting point from my own experience and understanding of how we can deal and handle grief, I take a closer look on how jewelry, objects and rituals can be of importance in a grieving process and our lack of visual outer display of grief in today?s society. Through Sara Ahmeds theory I found a new possible way of understanding emotions and how they shape us.

Långvarig ventialtorvård hos patienter med hög ryggmärgsskada- tid för urträning och bakslag i form av returer till intensivvårdsavdelning

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

Problematik med målkostnadskalkylering: Hur kan en leverantör påverka processens förutsättningar?

Bakgrund och problem: Målkostnadskalkylering innebär att ett företag samarbetar med sina leverantörer för att tillgodose slutkundens önskemål och för att kontrollera kostnadsnivåerna. I vår uppsats undersöker vi vilka kontextuella faktorer som påverkar leverantörernas möjlig-het till inflytande inom ramen för en målkostnadskalkyleringsprocess samt hur leverantörer själva kan påverka processens förutsättningar.Syfte: Uppsatsens syfte är att skapa en förståelse för den problematik som finns kring vad som avgör hur mycket en leverantör kan påverka målkostnadskalkylering.Metod: Vi har använt kvalitativ metod, och som en del i detta personliga intervjuer, för att kunna få en bra kontakt och för att kunna förstå respondenten. Vid urvalet av företag utgick vi från Volvo Personvagnar och tre av företagets leverantörer, Autoliv AB, Bulten AB och Finnveden Metal Structures AB, som vi har valt ut så att alla inte har samma beroendeställ-ning gentemot Volvo Personvagnar.Resultat och slutsatser: En av de kontextuella faktorer som påverkar leverantörers möjlighet till inflytande inom målkostnadskalkylering är leverantörens beroendeställning till köparen. Ju större beroende, desto mindre går att påverka. En annan faktor som påverkar är typen av komponent som leverantören tillverkar.

Inventering och riskklassning av förorenade områden i Öna och Östnor :

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Leanorienterad flödesutveckling : av kärntillverkningen på Affärsenhet Cylinder ASSA AB

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

Naturvårdande skötsel (NS) - blir resultatet som man tänkt sig? : en fältstudie över föryngring, trädslagsfördelning och död ved 14 år efter åtgärd

A new Swedish political approach to forestry was initiated 1993, that put goals of production and environmental issues into equal importance to Swedish Forestry Law. Earlier nature conservation very often declaimed preservation the best way to conserve nature, but recently it is clear that many highly biological values are due to former land use or disturbance. Many old pastures or cultivations dominated by deciduous trees are today characterized by a dense overgrowth of Norway spruce. By actively paying attention to nature in forestry (nature restoration), it is possible to partly reconstruct habitats or disturbances that are necessary to favour the biological values. The aim with this master thesis is to study the nature restoration, (NS, Swedish abbreviation), performed in 11 forest sites in the middle of Sweden 8-14 years ago. Since NS recently have become applied, it has never yet been evaluated.

Besparingsmodell för produktivitetshöjande arbete inom skärande bearbetningsteknik

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

Överlevnadsanalys och avyttringsorsaker - för ackordhäststiftelsens hästar 1967-2012

Few scientific studies have studied the subject of longevity among horses over a longer period of time. The knowledge about the Swedish riding school horse population concerning injuries and diseases is insufficient. Generally speaking, riding school horses in Sweden have a more undiversified way to work and work more hours in the arena compared to privately owned horses that have more variety in their possible use. Statistical data from the insurance company Agria have shown that horses in riding schools and education facilities have 22 % higher risk to use their veterinary insurance and 79 % higher risk to be put down and use their life insurance, compared to horses in private care. To create an increased understanding for longevity is it important to have knowledge about the different causes of culling. The aim with this study is to increase the knowledge and enable problem solving within the subject of longevity, median length of life and causes of death.

<- Föregående sida 35 Nästa sida ->