The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

In the year 1783 a fissure eruption from Laki in the southern part of Iceland produced a large amount of volcanic gases during a period of eight months. The volcanic gases and aerosols spread across the northern hem sphere due to ideal weather conditions and had a substantial impact on the environment, human health and also climate effects. This, so called dry fog, caused severe health problems, which led to death casualties, killing animals, crops and other vegetation. The consequence was a widespread famine which was aggravated by a hard and long winter in 1783/84. Analysis shows that the Icelandic volcanoes are the primary risk to produce dry fog that can affect Sweden.

Idag är antibiotikaresistens ett allvarligt problem. En tillfällig lösning på problemet är att utnyttja synergieffekter som kan uppstå mellan olika typer av antibiotika. Det innebär att antibiotika skulle kunna ha effekt mot bakterier som har utvecklat resistens.I denna rapport har flera olika metoder, för att mäta bakterietillväxt, utvärderats. Dessa metoder indikerar om antibiotikakombinationerna har en effekt. Däribland har både kommersiella och nyligen publicerade metoder undersökts.

 My field is Korpus and in this project I am investigating what role that plays for me as an artist connected to craft. To really get close to, and understand Korpus I have deconstructed it to find clues to why the silversmithing field looks like it does and how we got here. I believe Korpus has not yet come out of the closet for what it really can be. That it carries a great heritage of traditions and preconceptions that it would do well to shake off a little bit of. Can Korpus as an art field really survive in Sweden, where the Church has no power and silverware is no longer a need to demonstrate ones economic prosperity at an important dinner party? To help myself get closer to these objects I have given my own definition of Korpus.

The knowledge of the chloride content and its fluxes and patterns in trees is insufficient. Increased knowledge would be desirable, one of many reasons is to be able to more efficiently meet the problems that the substance causes in the pulp industry. The purpose of this study was to examine and describe the chloride concentration of Norwegian spruce (Picea abies L. Karst.) in the south of Sweden. Furthermore the aim was to be able to predict chloride concentration from readily measurable site factors.

This bachelor?s thesis studies Carl Str?mbergs ?ppeltr?dg?rd, a private garden consisting of a large number of apple trees and varieties. The garden is located outside ?rebro, in N?rke, and is owned by a unit owner association whose goal is to preserve and determine the varieties. Through interviews, articles, site visits and documents from Carl Str?mberg, the purpose have been to get an understanding of who Carl Str?mberg was, how he collected the apple varieties and how that process was affected by the climate amongst apple growing and pomology during that time.

The aim of this study has been to investigate how the death of a close relative is described in pictures and texts through the eyes of a child character in three picture books. The analysis has also considered how the child character copes with the tragedy and how he or she finds support in the grief process. The books analysed here are Resan till Ugri-La-Brek (1987), Farväl, Rune (1986), and Jättebra Olga! (2010). Since these are works of fiction, this study does not assume that they are an accurate reflection of reality, but the way the child characters act and cope with their grief has been compared with the findings of empirical research on how children react in real situations.The material has been examined by means of a qualitative literary analysis comparing the books according to the research questions. The study finds that the child characters receive evasive explanations from people around them concerning what death means, for instance that the person is sleeping.

As the Swedish governments long term goals include a reduction of fossil fuel dependency, increasing pressure is placed upon energy companies to create and develop new solutions for renewable energy. The following case study was done in collaboration with the company Sydved Energileveranser AB and one of their contractors, Enarssons Skogsentreprenad AB. The objective of the study is to examine the bioenergy situation in region of Skåne and evaluate the potential solutions in the region for a forest-fuel assortment, based on a bioenergy-cutting-system. As a part of this study I have compared ordinary manual cuttings done with a chain saw and cuttings made using the new ?bio- energy cutting system?. The cuttings made under both systems were tested in areas near agricultural fields or pasture land in order to maintain an open landscape.

The term euthanasia is derived from the Greek terms eu meaning good and thanatos meaning death, "good death". The penetrating captive bolt is an effective method of euthanasia, when use of drugs is inappropriate. The horse becomes immediately unconscious and falls to the ground. First after the blood is emptied from the body the horse is dead. The use of injectable euthanasia agents is a rapid and reliable method of performing euthanasia. The aim is to stop the flow of oxygenated blood to vital organs and tissues. The muscle relaxants may be used either in combination wih or following an anaesthetic dose of barbiturate, their use use as a sole agent is totally inhumane.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

The main purpose of this study is to investigate the productivity effects of multiple tree handling in thinnings. Other important elements have been to investigate in which extent multi-tree handling is used in stands with different stem volumes and the impact of collecting partially delimbed fuelwood assortments has on harvesting performance. The study is based on data from thinnings in Sydved and contractors' operating activities. Collection and compilation of operating schedules, number of stems and surveyed volumes from several contractors and a large number of executed orders underlying the results. Multiple tree handling is used to a much greater extent at lower average stem volumes. Prediction models for productivity of the multiple-tree handling harvesters in the study differ from the productivity models for single-tree handling. In the model developed in this study productivity is not as dependent of stem volume as reference models.

Previously when I have made proposals for privately owned gardens, I have found it difficult to find strong, extensive designs and to work with room and space. Since this is the field within which I am going to work in the future I feel that I need more experience, reference material and ideas on how I, in an early stage of the working process, can work with and consider room and space. The aim of this project has therefore been to procure experience, reference material and ideas for design of a garden in relation to space. To procure experience and reference material I have, during the fall of 2008, made two incredible study tours to France and to Japan. I have interviewed the landscaping architect Maria Arborgh and studied literature. I have also used a garden outside of Gothenburg in which I have been able to try out different thoughts and ideas regarding shape that have appeared during the course of my work. My conclusions about landscaping are that you should first find the different functions in the garden. The next step is to find an overall theme or shape, use a small number of materials, build a room with sealing, walls and portals with the help of vertical elements e.g.