This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

Detta examensarbete på 15 hp. har haft målet att kunna hitta en guide för planering av fönster för byggnader som ska certifieras med Miljöbyggnad. I certifieringsprocessen ingår beräkning av solvärmelasten, vilket ger en siffra på hur mycket solvärme som strålar in i byggnaden, som sedan kan behövas ventileras eller kylas bort under sommarhalvåret. I processen beräknas även dagsljusfaktorn, vilket ger en siffra på hur mycket dagsljus kommer in i byggnaden. Då dessa två aspekter påverkar negativt på varandra har olika tester gjorts med hjälp av olika datasimuleringar för att finna vilken fönsterarea skulle kunna vara lämplig för att få ett bra betyg i Miljöbyggnad.

Examensarbetet behandlar ett brotvärsnitt som inte entydigt kan betraktas som ett balktvärsnitt eller plattvärsnitt. Med de måttdefinitioner som används vid broprojektering ska en plattkonstruktion ha en bredd som är fem gånger höjden, annars ska konstruktionen ses som en balk där även balkens längd definieras att vara större än tre gånger höjden. Brotvärsnittet som studeras i detta examensarbete kan alltså definieras både som ett plattvärsnitt och som ett balktvärsnitt. Målet med arbetet är att undersöka om det är möjligt att finna en metod att konstruera denna typ av tvärsnitt som befinner sig i gränslandet mellan två definitioner. Skillnaderna mellan en plattas och en balks verkningssätt ligger i att plattan antas bära last i två riktningar medan en balk enbart bär last i en riktning.Examensarbetet är genomfört i sammarbete med WSP Bro- och vattenbyggnad i Örebro, som konstruerade en bro med just detta tvärsnitt.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

In my project I worked with fluorescent color and fear as a theme together. It was based on my question for what happens when you take all the lights out and highlight a fear or phobia. I wanted to experiment and explore the course of event within the surface of a picture by using this kind of paint.I worked with illustration and pattern to bind the two pictures together. The aim was to investigate what is possible with the picture as a medium and work with contrast to make it as effective as possible. My goal was to make one poster of each fear and to make them work together as a series as it?s best.I asked myself many questions such as;? What happens to the surface, image and room when you use this color?? Will a new quality appear?? What happens when you mix two pictures together on a parallel level that only show in different kind of light?.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

Companies constantly strive for the perfect order which enables them to satisfy and retain their customers. This is a difficult process that can be facilitated by using different picking technologies. In this study, a research of the picking technologies Pick-to-Light and Pick-to-Voice have been made to investigate when each technology is suited.In order to collect relevant information and data to be able to answer the question formulation, a qualitative study with interviews have been made. The purpose of this essay was to investigate Pick-to-Light and Pick-to-Voice to see when each technology is best suited and to see what the differences between the technologies are. With our essay we wanted to help manufacturing companies to make the right decisions when implementing a picking technology.The results showed that those picking technologies give companies a higher picking quality and an increased work efficiency since the order picking is faster to perform, and that picking errors are reduced.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Climate change is an increasingly widely known concept. In the EU the construction sector is responsible for more than a third of the carbon dioxide emissions and 40 % of the total energy use. In Sweden, measures have been taken to prevent this climate change. By 16 targets, three of which can be linked to the construction sector, Sweden will reduce the negative trend. None of the three goals with relation to the construction sector will however be achieved before 2020.

In today?s modern society with high-speed connections covering the globe people are more than ever finding themselves gazing into the cold lights of the computer screen. On the other side a strange and exciting world yet to be explored awaits. Many are those who spend hour after hour running over green hills swimming in vast blue oceans in the lands of Azeroth, the playfield in the MMORPG game World of Warcraft. In media we often read and hear alarming reports on players stuck in this virtual world, ceasing to play a part in the real world.

This essay has aimed at exploring how different companies work with CSR. We want to highlight their opinions about the topic, what it means for the companies that work with it and how important it is to apply CSR in a business. The reason why we chose this subject is because of the possibilities that come with working with CSR. We think there are a lot to be done when it comes to corporate social responsibility and we want to be a part of this new type of marketing. The win-win-situation that occurs with CSR is unique and it makes the subject interesting.

Today's communication solution between the vehicle and trailer is one many see as anon-viable solution, then breakdowns on both the lights and cables are common. Now, anew innovation enters the market, a system that can transmit wireless control signalsbetween the vehicle and trailer.Parvus and Zap, the two solutions that the projekt group has come up with during thisthesis work carried out over the last year on Utvecklingsingenjörsprogrammet.Technologists Peter Jägevall and Christopher Åberg has developed this project on theirown. The group has developed various concepts and chosen to work on, two of them.The project has resulted in this report and a prototypeThe solution that the group has developed is a wireless communication between vehicleand trailer. The project team has developed new power-efficient LED lighting fixtures inorder to implement an internal power source in the trailer. The result of this has becomea maintenance-free and wireless product to trailers.