In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

Today's high oil prices and more stringent environmental requirements have led to that manufacturers of mobile construction equipment try to make their products more energy efficient. With this in mind a project about hybridization of hydraulic systems has been formed. The purpose of this project was to analyze the savings that can be achieved by hybridization of hydraulic systems. A reach stacker truck (Kalmar DRD450-80S4XS) were simulated in some load cases with conventional hydraulic systems and with three types of hybridized hydraulic systems. Different parts of the hydraulic systems were also analyzed separately.

The proportion of overweight children is increasing rapidly in Sweden. International and National goals of public health aim to improve diet and physical activity. Health promotion consists of preventing illness and promoting health. Within the school a well planned health promoting work proceed from students, parents and teachers. The aim of this study was to investigate knowledge, attitudes and behaviour pertaining to diet and physical activity among students from 6th to 9th grade at Klågerupskolan in the community of Svedala.

The purpose of this paper was to investigate whether Suzanne Retzinger?s linguistic cues for shame and verbal behaviors for hiding shame could be used to measure shame in surveys based on Thomas Scheff?s theory of shame. I created a measurement instrument consisting of 30 statements, which were all meant to measure general shame.The instrument was administrated to 180 respondents studying at Karlstad University, of whom 4 respondents were removed from the data set due to lack of standardization. With the polytomous rasch model used for the analysis, data from 176 respondents were analyzed, of whom 124 respondents were female and 52 were male.The result showed that the measurement instrument?s statements should not be used together because the analysis indicated multidimensionality.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

This study has dealt with a phenomena that is regarded as new in the Swedish context of social work called honour related violence because of sexual orientation. The purpose was to critically examine a project that offers a variation of assistance for individuals between 13 and 25 years of age who suffers from the above. The project mentioned is run by an organisation called RFSL Rådgivningen Skåne. The aim was to examine the practice and to gain knowledge concerning the target group and relate it to that described by the project. Another aim for the study was to look into how the employees and the author of a report that is commonly used as background material in the practice used the complicated terms involved in the field and how that may effect the individuals that are the target for the resources.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

During the years 1950-75 was the construction of building apartments in high speed. A rapidly growing reconstruction requirement is the consequence of the rapid construction speed in these years. The technical lifetime of the different parts of the buildings is about to end and the needs for reconstruction is huge. One of Sweden's national environmental objectives is to reduce the urge of energy in buildings. This calls for radical measures to implement energy efficiency of existing assistance particularly in the assistance that is now facing reconstruction.

In Northen Bungoma, Western province ? Kenya, the Vi-Agroforestry Project (VI-AFP) has introduced a new project that covers 7000 households. To succeed with the project, a water resources protection project, agroforestry methods will be implemented to secure the water quality of the area. In this thesis a foundation is laid for future follow-up studies of land cover and land use of this area. To carry out this study an existing method from a cooperation between VIAFP and Dalarnas University (HDa) has been implemented.

AbstractThe market?s demand to purchase more cost effective products is continuously increasing. The producers are forced to become more efficient and flexible with resources to produce high quality products at a low cost in order to maintain or increase market shares. With this in mind Isaberg Rapid AB is requesting a project to increase efficiency in the assembly cell of hammertackers. The company has found in Kaizen-events that there is a potential of efficiency improvements in the assembly group that has not been achieved.The objective with this paper is to identify the major factors that influence the efficiency in the assembly cell for hammertackers.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.