Denna rapport är resultatet av ett 10 veckor långt examensarbete om logistik i byggbranschen. Rapporten ska redovisa för- och nackdelar med Just In Time-logistik jämfört med lagerföring av material på byggarbetsplatsen. I arbetet ingår även att redovisa vissa extra kostnader som tillkommer i samband med respektive alternativ. Rapporten jämför de olika logistikmetoderna och utgår ifrån tre olika byggprojekt i stockholmsregionen som har helt olika förutsättningar. Målet med rapporten är att ta reda på om byggbranschen kan effektiviseras med Just In Time-logistik. Som hjälp för att nå målet har bland annat intervjuer gjorts och en enkät delats ut till de berörda på varje projekt.  Vad som kostar mest är inte helt enkelt att bestämma då vissa osäkra parametrar ingår i resultatet.

This paper exposes the problems and challenges organizations face when integrating aged systems, web based systems and web services. The paper focuses on how people with different titles in an organization experience systems integration and the factors that contribute to project failure or success. The research methodology used in this is Grounded Theory and the resulting theory of this paper has taken form through the coding of transcribed interviews, which have gone through a constant comparing to other theories in the area of interest, mostly articles about success factors in system integration. The resulting outcome is a success model aimed to describe the underlying indicators to achieve project success.The success model consists of three factors that contribute to success in integration projects. The factors are: globalization, governance and balance.

Inkorporering av extern data i datalager är problematiskt och problematiken bekräftas av aktuella undersökningar inom området. Detta har medfört att det utvecklats olika former av stöd för att bemöta och analysera problemen som organisationer ställs inför.För organisationer är det i högsta grad viktigt att dess beslutsfattare är välinformerade och klarar av att selektera information från stora mängder data. Det är i dessa sammanhang som en datalagerlösning är en viktig hörnsten för att stödja analys och presentation av data som ursprungligen är lagrad i olika datakällor (både interna och externa). Genom att inkorporera extern data i datalagret uppnår datalagret en betydligt högre potential och således kan även organisationer och framförallt dess beslutsfattare utvinna stora fördelar.Strand (2005) har tagit fram riktlinjer för att stödja inkorporeringsprocessen av extern data i datalager. Dock saknas en utvärdering av riktlinjerna.

The relational database model was defined in the 1970?s and is the dominating database type today.  The main difference between data from a relational database and a hierarchical data structure is that the relational database stores records in tables. The records have no particular order, but can include links in terms of relationships with other records. A hierarchical structure organizes data in the form of a tree structure  and  can for an example be found in organizational structures in which different levels involves different responsibilities. If the data stored in a relational database is to be presented in a hierarchically, a conversion of the data structure is required. The intention of this paper is to describe how such a conversion can be performed.  To investigate the conversion methods, case studies has been conducted on the basis of a specific organization?s hierarchical structure.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.

Det allmänna trycket på förändringar ökar ständigt, liksom organisationers behov av att hantera och genomföra dessa. Samtidigt är förändringsprojekt komplexa och har en hög misslyckandegrad. Interna förändringsprojekt kan involvera både projektledning och förändringsledning. Skillnaden mellan dessa kan enklast beskrivas som att projektledningens fokus ligger på den tekniska lösningen medan förändringsledningen riktar energin mot att skapa förståelse och acceptans hos projektets berörda individer. Under det senaste decenniet har forskning riktat fokus mot interna förändringsprojekt och behov av kompetenser hos projektledaren.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The goal with this project, was to explore the producing of a musicvideo with a synergistic focus in a practical way. Beside the practical work with the recording and editing of music and video, I wanted to explore the sound engineers role in such a project? To my help I had the video producer Hannes Knutsson from the small film- collective Lefvande Bilder and the singer, guitarist and songwriter Conny Flink. The result of my work is a musicvideo published on the internet website YouTube and the report of the making of it along with my work around the question above is published in this report. The name of the recorded and filmed song, written and performed by Conny Flink is ?My Way?. .

HMS Industrial Networks AB is in need of changing a communications solution that iscurrently based on an ASIC. This will be achieved by moving the communications solution toa FPGA with the help of the programming language VHDL. By doing this, it is possible toreduce the need for specific circuits, get a more flexible platform and thus get a cheapersolution.This report describes a solution for how to move a network protocol from an ASIC to anFPGA. The report shows that the network slave device is working under the guidelines forthis project. This means that it is quite realistic to implement a fieldbus protocol on an FPGA,using VHDL and to maintain the same functionality as the earlier communications solution..

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

The purpose of this project is to examine the development of the upper secondary school physics course and from this get a better understanding why the course is organized the way it is today. The timeless argument for studying science in school will begin this essay. After that the reader will be aware of when important discoveries in physics were made. Then school history is presented. In this part we are told when the first school started in Sweden, but the focus lies on the upper secondary school and the physics course.

Today many industrial companies invest a lot of resources on research and development to resist the tough competition on the global market. This leads to a high risk game when the companies start many development projects, with uncertain outcome where some of the projects have to be terminated prematurely. The main purpose with this study is to identify factors, both internal and external, that influence the decision to terminate projects prematurely in Swedish development projects. Factors mentioned in the literature will be compared with case studies on three Swedish industrial companies to demonstrate the most important ones when taking such decisions. First a literature study was made to identify basic terms, a general project model and factors affecting the decision.