The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

In order for a judgement to be enforceable in another Member State, there is a certain requirement for an "intermediate? court procedure, a so-called exequatur procedure. An exequatur procedure is both expensive and time-consuming. The average cost of the procedure within the EU is 2 200 euro in a case without particular difficulties. In more complex cases, the cost of the procedure can be validated up to 12 700 euro.

Syftet med detta examensarbete är att undersöka hur dator/Internet enligt fyra lärare kan fungera som ett pedagogiskt verktyg i undervisningen gällande gymnasieskolans yrkesämnen.Tidigare forskning visar att datoranvändning fyller en viktig funktion i kunskap och lärande och att dator/Internet som verktyg i undervisning är ett sätt att förbereda elever inför deras framtida yrke.Dator/Internet ersätter inte den traditionella hantverksundervisningen med att praktiskt överföra handlaget. Däremot kan dator/Internet vara nödvändigt i vissa moment i undervisning för att uppnå den moderna tidens krav.Nyckelord: Data/Internet, IKT, IKT som verktyg i undervisning, IKT utveckling, datakunskap.

The current thesis is on the rule of law and how the principles of the rule of law are met in thenew Swedish migration process. The migration process has been subjected to criticism duringseveral years and on different occasions. The migrations process is viewed through a ?rightsof the child? perspective, foremost to seek if the rights of the child are met. The children are avulnerable group, not the least in the process of migration.

The Swedish wolf population is like continue to grow and this will eventually lead to an increase in the predation of livestock. In Sweden carnivore attacks happen most frequent on sheep farms and the majority of these attacks are performed by wolves. Because of this, the main focus in this study is on the sheep and wolf problematic. It is not only the direct killing of livestock that affects the animals and their owners in a negative way. It has also been shown that livestock that lives close to carnivores sometimes change their behaviour in a way that will affect their ability to reproduce and to forage efficiently.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

Today, youth crime is a topic that recurs daily in the news and politics; the subject arouses motions both within the professional community and among private individuals. The purpose of this study was to shed light on how social workers reason and work with young people aged 15 and above who are in criminal environments. We also shed light on how motivation can contribute to young people accepting the voluntary interventions that social workers have available. The study helps draw attention to the potential challenges that social services face when motivational work is insufficient, and the concern is not sufficiently high to warrant the use of coercive interventions. Our empirical material was collected using semi-structured interviews with social workers who have a degree of Bachelor's degree in Social Work, whose work is to carry out investigations of young people who, due to their own behavior, may be in need of support or protection from social services.

With numerous applications in both military and civilian life, the demand for accurate 3D models of real world environments increases rapidly. Using an airborne laser scanner for the raw data acquisition and robust methods for data processing, the researchers at the Swedish Defence Research Agency (FOI) in Linköping hope to fully automate the modeling process.The work of this thesis has mainly been focused on three areas: ground estimation, image segmentation and classification. Procedures have in each of these areas been developed, leading to a new algorithm for ground estimation, a number of segmentation methods as well as a full comparison of various decision values for an object based classification. The ground estimation algorithm developed has yielded good results compared to the method based on active contours previously elaborated at FOI. The computational effort needed by the new method has been greatly reduced compared to the former, as performance, particularly in urban areas, has been improved.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

SAAB Security and defense solutions i Järfälla har ett system som används av militären för övervakning av flygplan. Systemet visar på en datorskärm en karta över Europa där flygplanen visas med markeringar från data som samlats in av radars. Då data samlas in med en låg frekvens visas ytterligare en markering som kallas målspår. Dessa målspår beräknas fram med tunga matematiska beräkningar och sköts av datorns processor.Det finns ett önskemål om att flytta dessa beräkningar till datorns Grafikkort med hjälp av OpenCL och därmed frigöra processorns resurser. OpenCL har implementerats med två olika Java bindings och prestandaskillnader mellan dessa samt de ursprungliga beräkningarna har undersökts.

This master thesis reviews advances in detection and diagnosis of static friction (stiction) in control valves. Control valves suffering from stiction results in oscillating control loops which in turn decreases both the process stability and reliability. Perstorp AB sees a necessity to automatically detect stiction in valves before the effects of the malfunctioning valves have become too severe. This thesis presents an introduction to maintenance, control loops and how stiction in valves can affect performance of control loops.A selection of methods presented in the literature are introduced and examined using normal operating data from the site in Perstorp. Common for all selected methods is their intuitive ideas and that they are based on normal operating data and minimum amount of process knowledge.

This study deals with some contested issues regarding prehistoric cultural development in Amazonia and the colonial impact on the native inhabitants of the area. It focuses on the relation between groups belonging the language families of Tupí and Gê, on one hand, and the different ecological zones that they inhabit, on the other. GIS mapping is used to visualise the distribution and movements of these groups in relation to ecology and the impact of European colonization. GIS is shown to be a useful methodology for analysing historical data derived from written sources and maps. The results of these analyses are discussed in the light of different theoretical perspectives.

Bakgrund och problem: I takt med att allt mer information genereras har en problematik uppkommit kring hur man skall hantera denna i organisationernas IT-infrastruktur. Utbudssidan hävdar att deras nya lösningar kommer att revolutionera möjligheterna kring analys av alla olika former av data. Tillgång bättre information och förbättrade analysmöjligheter kan få stora konsekvenser för ekonomistyrningen förutsatt att det används på rätt sätt. Syfte: Vårt syfte är att identifiera och beskriva innebörden av begreppet Big Data samt hur de teknologier och verktyg som finns kan stödja ekonomistyrning. För att sätta området i ett större sammanhang har vi studerat begreppet utifrån tre aktörers perspektiv.

Very often the interesting variables are explained by several underlying variables and in statistical analyses it is common to study the relationship between variables and groups of variables. Because of this multivariate analysis is commonly used in both science and industry. There are two problem with both univariate and multivariate analyses. One is when the variables are correlated. The other is when the number variables of exceeds the number of observations which makes the matrices algebra used in the analysis impossible to execute.