In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.

The management of information is one of the key aspects within a successful andefficient product development process, particularly regarding complex products.Scania CV AB is at the moment developing a new IT-system, OAS, which aims tomanage the company?s product data. With this as a background, the purpose of thismaster thesis is to identify the cross-functional user needs within Scania?s organizationconcerning product data and the management around it.To fulfill the purpose, an empirical study consisting of 40 personal interviews with 50representatives from different functions within Scania?s organization was carriedthrough. The empirical data was then analyzed focusing on identifying thecross-functional needs and issues.The study points out that there is a big potential regarding improvement among themanagement of product data.

For a few decades, the wild boars are established over large areas in southern and centralSweden. Where they cause problems in terms of damage to crops in the agriculturelandscape, where rooting, browsing and trampling, but also damage to the crop when wildboars chosen daily rest in the cultivated fields. Along with the growing number of wildboars the rate of car accident with wild boars has also increased.Here I examined the daily rests of wild boar (Sus scrofa) sows in southern Sweden, todetermine the factors which the wild boars sows choose for daily rest. By determining whatfactors are important in this selection of daily rests, we may be able to make managementmeasures to reduce the damage wild boars make in the agriculture landscape by attractingthem to places where they do less economic damage and accidents on roads.In this study I have examined 123 daily rest positions from 14 different individual wildboar sows fitted with GPS collared in Southern Sweden, Skåne County in Christinehof,Högestad Kronovalls estate. Data was collared over the years 2004-2006 during the periodfrom June 1 to September 30.

This report is an evaluation of the cooperation between the rescue command centre and the POSOM-groups (?Psychological and social support?) after the Tsunami catastrophe in December, 2004. The report describes the interaction between these two municipal administrations, what services the rescue command centre provided and how they gathered information. Finally the author suggests different solutions to how the collaboration within these different municipal administrations can be increased and improved in future times of crisis..

Bachelor thesis ? ControllerEconomics, Linneaus UniversityTitle:From data to information ? a case study at Södra Cell Mönsterås Authors:Sofie Gotting, Renée Lundberg and Emma Molin Tutor: Anders Jerreling Examiner: Fredrik Karlsson In Sweden, the process industries employs nearly 600 000 people and it accounts for about 60 percent of the country's net export. In many industries today, there is a growing emphasis on calculations. They are used to manage and control the activities in today?s organizations, one of these industries is the process industry.

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

This paper describes the work done trying to diminish the noise present in the signal from an IR-detector. The project was aiming towards two different kinds of applications; heat protection and presence detection. The hypothesis was that the signal-noise ratio would decrease if a filter and a proper installation were used for the detector. Some experiments were executed to determine what kind of filter were the most suitable for each application and how these could be installed. After executing the experiments and evaluate the results we recommend to use a specific filter for each application.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

This report is based upon an experimental study of exit sign luminescence in different environments. The purpose is to evaluate the lowest luminescence of an exit sign, based upon Swedish regulations. Scientific experiments have been conducted in a controlled environment, where exit sign luminescence was graded by an evaluation group. The results of these have been verified by similar experiments that took place in two department stores. The final result of the study is guidelines for appropriate exit sign luminescence in different environments..

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

AbstractWe are facing a century of rapid change in climate, with significant challenges in managing the impact of changes in living conditions for plants and animals. We can already see the responses of species through changes in phenology and spatial distribution, which may change ecosystem structure and function, with subsequent effect on ecosystem services and biological diversity. In Sweden, between 2005 and 2010, the red-listed species has increased by 13 % and similar trends can be seen across the world, making it difficult to attain national and international environmental objectives of preserving biodiversity. One way to reduce the loss of biodiversity is to protect nature from exploitation by allocating valuable areas as nature reserves, but climate change affects protected areas just as much as other landscapes and therefore requires elaborate systems of protection to facilitate species' survival. The paper has examined  how the decisions and management plans for nature reserves in Sweden have been followed-up and whether they are climate adapted or not by examining 30 nature reserves, classified as newly formed (2012), recently revised (2009-2011) and older (1977-2007) reserves, and assessed what is in the decisions and management plans for follow-up, revision, long-term goals and documentation.