Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

Over the past two decades, trends of integration processes in terms of citizens of different ethnicities, different gender and different sexual belongings, etc. has grown thanks to debates and new legislations. A marginalized and discriminated group in society such as women, immigrants, homosexuals, transsexuals and people with disabilities during this time has gained momentum in the community. The curiosity over whether these developments have changed our attitudes and values to the world around us, and if so how, is the reason for this master's thesis in disability studies.The Swedish development forms the basis for my belief on a younger generation of people who would be more tolerant than previous generations, in terms of what is considered to belong to the norm in our society, or not. The purpose of this study is therefore to increase knowledge about what beliefs young people today have about people with disabilities.

Background: Many women experience high levels of pain after caesarean birth. Adequate postoperative pain treatment is important for the mother to be able to breastfeed, take care of the infant and experience a positive birth. Objective: The overall aim is to study women?s experience of postoperative pain and pain relief after caesarean birth. Method: A quantitative retrospective survey.

Extreme Production Makeover? fångade vårt intresse för en tid sedan, strax innan vi skulle börja skriva vår C-uppsats. Metoden går ut på att under mycket kort tid förändra och effektivisera en produktionslina för att höja produktiviteten. Vi blev genast nyfikna på om Extreme Production Makeover? skulle gå att omsätta i administrativa flöden och tjänste-flöden med ett informationslogistiskt perspektiv.Inom produktion finns det en lång tradition av att arbeta med effektiviseringar och förbättringar.

The cheetah (Acinonyx jubatus) is one of the big feline species kept in zoos worldwide. The wild populations are quite small and therefore the captive population make up an important part of the total population of the world. Although life in the wild is not always easy and a captive environment provides shelter and food it does not come without problems. In captivity cheetahs become chronically ill and also develop stereotypic behaviours. Neither of these are problems in wild populations and both can be linked to stress in captivity.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

The project was intended to produce a brush simulation plugin to the image processing program GIMP which would use a 6DOF drawing tablet for user input.Too ambitious goals coupled with compability issues between the resources used resulted in that no meaningful software was produced. Experience was however obtained, and this paper is intended to give an overview of relevant concepts for- and the process ofcreating a brush simulation..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Now a day?s there is dramatic change from traditional to digital information processing in construction industry. This change can be visualized in the project concept stage where it now has accessibility to join all the data in one place. Location-based planning technique simplifies scheduling by visualizing the schedule efficiently and has many advantages such as might shortened the project period by about 10 - 20 % if the company uses location-based technology, reducing risks in many ways by maintaining production continuity and identify collisions between things etc. Vico Office software has been used for Location based planning technique and in this thesis.The purpose of this thesis work was to demonstrate how location -based planning technology change the scheduling stage in Peab, potentially reducing the project time.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Storm water management has become a more important matter as urban areas are expanding and natural areas are being exploited. As nature landscapes are being converted into hard surface areas storm water flow is affected both in terms of velocity and size. A flow increase can easily result in a flooding if the dimensions of the pipeline system are inadequate. Considering predicted upcoming climate changes, flooding?s may become more common in urban areas in the future.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Spel idag kräver en enorm mängd arbetstimmar för att skapas, därför behövs alltid sätt att spara tid och automatisera processer. Algoritmer för polygoniseringen av skalärfält, som Marching Cubes, har under de senaste åren blivit ett allt vanligare tillvägagångssätt för att automatiskt generera terräng. Scenkomplexiteten och kraven för visuell kvalitet i dagens spel ökar ständigt. Därmed kommer också kravet för prestandaeffektiva renderingsmetoder. Deferred rendering är en renderingsmetod som kan hantera scener med stora mängder ljuskällor och hög scenkomplexitet samtidigt. För att undersöka integreringen mellan procedurellt skapad terräng och en deferred rendering pipeline, skapades en applikation i DirectX 11 för att undersöka implementeringen och potentiella optimeringar av denna integration..

The aim of this study was to investigate for how long patients fast before thoracic surgery, plastic surgery and ear, nose and throat surgery, at the University hospital of  Uppsala, and what knowledge patients have about fasting and how they get affected by it. 30 patients were interviewed, 10 patients at each ward, according to a questionnaire. Data processing was performed with SPSS. There was no difference in fasting time for solids between the wards but the mean fasting time was 14 hours. In the thoracic ward patients fasted from liquids considerably longer than in the other wards.