Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

Young stands in urban forests often lack a shrub layer, though shrubs play an important structural and biological role in forests. All layers interact with one another to form a multilayered stand, in which shrubs have a vital role.In this diploma thesis, theoretical models for forest dynamics are compared with four reference stands to detect factors, and principals for introduction of shrubs in young stands. In these stands four different ways of introduction were found. In one trees and shrubs were planted together at the same time. Shrubs spontaneous spread under a canopy of mature forest, in another.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction frommoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

When the Eolshällproject was completed for the first time, a great deal of moisturedamage was discovered. Therefore the structure completion was removed andreinstalled. The project was originally planned to cost a total of 126 million SEK, but thefinal costs landed on 271 million SEK. What caused this failure? Were the designs poor,was the technology used too advanced, or was the project not managed properly?Based on the Eolshällproject, theses will be presented about what may have caused themoisture damage.

Taking a qualitative approach, this research investigates different theories and methods for creating parks that people will cherish and visit during their daily life. It also takes on the task to understand how principles of developing recreational values in a small forest is affected by the addition of a new element to the landscape, i.e. a major highway. Data was collected through the combination of focused literature review and study trips. This provided a framework which in turn was applied to the subject of the study, i.e.

Floor surface in pig facilities can have an impact on animal welfare and pig health, as it can cause the pig physical damage and thereby increased risk of infectious diseases and lameness. The development of pig housing systems has resulted in a decreased use of bedding. It seems hard to find the optimal floor in farrowing pens, as it must suit both the sow and piglets. The floor friction needs to be adequate to avoid slips and at the same time should the floor be non-abrasive. Abrasions and lesions caused by the floor are not only causing the animal suffering, but are also negative from an economical aspect.

Surrogate boycotts are highly threatening for corporations in terms of both economical cost and image damage. All corporations are due to our globalized environment and increased stakeholder fragmentation gradually more risking to become victims of surrogate boycotts, which of nature is hard if not impossible to predict and prevent. Corporations are generally recommended to build clear and strong corporate identities, which should be reflected in their most important stakeholders, as this will secure minimum damage on the corporate image. Even a surrogate boycott situation can have positive effects on corporations, especially in terms of image, as such situation increases the brand involvement and thereby make it possible for corporations to connect with important stakeholders on an emotional level. .

Fungi are everywhere around us and recently, there has been an increased interest in their role and importance in the forest. The fungi have several strategies to acquire energy and nutrition; one example is a mutual symbiosis with trees and plants - another being dissolving organic materials. Attempts have been made to better understand the circulation of nutrition in coniferous forests, and how fungi cooperate. Trees and plants have adapted with mycorrhizae and are now interdependent which is important to consider in forestry. A great number of fungi depend on dead wood and old trees to set fruiting bodies and spread further. These fungi also create environments for other species, such as birds and insects. The vegetation of a forest is determined by a series of factors; tree species, how old the forest is, soil type, as well as the ability of the fungal spores to spread and establish. Furthermore, in determining vegetation, the fungi?s ability to compete in the soil matters. These factors are nearly unexplored. Researching fungi knowledge and interest, a survey was distributed to five groups of people. The groups included forest owners, high school teachers, high school students, senior citizens, and a fifth group - ?o he ? - consisting of people of mixed ages and backgrounds.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

Throughout its wide distribution in the northern hemisphere, the golden eagle occurs in a diverse range of environments, e.g., mountainous, forest and open areas. The literature on juvenile golden eagles is limited, and this study provides further knowledge on habitat use and ranging behaviour during the post-fledging period in boreal Sweden. A total of 14 golden eagle juveniles were tagged with GPS transmitters during 2010 and 2011, and nine could be followed during the entire post-fledging period from fledging until migration. The juveniles fledged at the end of July and beginning of August and initiated migration during October and beginning of November. The length of the post-fledging period, until migration started, ranged from 49 to 97 days. During this period, the juveniles? distance from their natal nest and their GPS height increased with time as their flying abilities developed.