Automatic rumination measuring can be applied as a health indicator in dairy farming but is also highly desirable for research purposes. This study aimed to validate the technical functionality of the product RuminActTM, which employ acoustics to monitor rumination duration. The time budget of high yielding cows was studied and possible differences in rumination time between 13 rations were interpreted. Further the study examined what affects daily rumination and rumination efficiency. The validation was performed with direct observations that were compared to the automatically recorded rumination durations.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Syfte: Syftet med denna uppsats är att studera om förändringar i arbetet med rörelsekapital hade ett samband med lönsamheten i företag. Som mått på rörelsekapital används Cash Conversion Cycle och som mått på lönsamhet används ROA.Teoretiskt perspektiv: Den teoretiska referensramen består av teorier om Working Capital Management, Cash Conversion Cycle, Lean, Supply Chain Management och Supply Chain Finance.Metod: I denna uppsats används en kvantitativ metod där sekundärdata samlas in från årsredovisningar för 2005 och 2013. Denna data ligger till grund för fyra korrelationsanalyser. Den beroende variabeln i korrelationsanalyserna är ROA och defyra oberoende variablerna är Cash Conversion Cycle, dagar i lager, dagar som kundfordring och dagar som leverantörsskuld. Urvalet i denna studie består av svenska aktiebolag inom branschen tillverkning och industri med fler än 50 anställda.Empiri: Empirin består av fyra tabeller som presenterar de beräkningar som gjorts.Slutsats: Sambandet mellan förändring i Cash Conversion Cycle och förändring i ROA blev väldigt svagt positivt men inte signifikant.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Syfte: Syftet med denna uppsats är att studera om förändringar i arbetet med rörelsekapital hade ett samband med lönsamheten i företag. Som mått på rörelsekapital används Cash Conversion Cycle och som mått på lönsamhet används ROA.Teoretiskt perspektiv: Den teoretiska referensramen består av teorier om Working Capital Management, Cash Conversion Cycle, Lean, Supply Chain Management och Supply Chain Finance.Metod: I denna uppsats används en kvantitativ metod där sekundärdata samlas in från årsredovisningar för 2005 och 2013. Denna data ligger till grund för fyra korrelationsanalyser. Den beroende variabeln i korrelationsanalyserna är ROA och defyra oberoende variablerna är Cash Conversion Cycle, dagar i lager, dagar som kundfordring och dagar som leverantörsskuld. Urvalet i denna studie består av svenska aktiebolag inom branschen tillverkning och industri med fler än 50 anställda.Empiri: Empirin består av fyra tabeller som presenterar de beräkningar som gjorts.Slutsats: Sambandet mellan förändring i Cash Conversion Cycle och förändring i ROA blev väldigt svagt positivt men inte signifikant.

The aim of this small thesis is to investigate if the probability of business failure is higher at the time of divestment than at the time of acquisition for portfolio companies that have been subject to private equity ownership. The background for this thesis is the widespread critique aimed at private equity firms, claiming that they increase the risk in their portfolio companies. We have performed a study of 53 buyout transactions, involving Swedish manufacturing companies, covering a time span of 13 years, from 1995 to 2007. We find evidence of an increased risk of business failure for the portfolio companies with a short forecasting horizon (within one year). The absolute increase in the sample is however small.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

One way of signalling commands to the horse during riding is through applying tension on the reins to create bit pressure in the horse?s mouth (Terada et al., 2006; Clayton et al., 2011). The skilfulness of the rider in using the hands when applying bit pressure has consequences both for the horse?s performance and welfare (Manfredi et al., 2010). At the trot there are large vertical deviations of the horse?s body which the rider must adjust and adapt to (Terada et al., 2006) and an unsteady hand due to inability to follow the horse?s movement can be a source of discomfort and conflict behaviour in the horse (Heleski et al., 2009).

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

This report analyzes disposable packaging and returnable packaging with the methods life cycle analysis and life cycle costs analysis. These two different packaging are analyzed through the company Clas Ohlson?s packaging-flow. To get a picture of how the flow works, a visit at the company and email contact have been done with Clas Ohlson to get relevant informationToday Clas Ohlson has a big flow of articles to the stores without larger variations in the demand, with the exception of autumn, which is when customers start shopping for Christmas. Clas Ohlson?s articles are placed on a pallet and are wrapped into plastic-film for protection and to make sure that nothing will be stolen.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

The milk production per cow has increased considerably during the last 50 years and due to the breeding for higher milk production also brings decreased reproduction efficiency. In a Swedish study 1996 it was shown that on average only half of all estruses were detected. Every time a farmer fails to detect oestrus it costs the farmer about 1200 Swedish crones and the need of means of detecting oestrus is therofore large. With this study we wanted to investigate if heart rate respectively crystallisation of vaginal mucus (arborisation) could be useful means of detecting oestrus. We monitored two oestrus cycles in four heifers.