This thesis consists of three parts: one normative, one empirical and one constructive, with the intention to explore the enforcement of accountability in megaprojects.The thesis aims to evaluate the level of accountability in the policy process of the European Spallation Source, ESS between 1990 and 2008. In order to make a comparison possible, a norm is created concerning how a policy process should be designed, with primary focus on openness and participation, to make enforcement of accountability possible. The policy process of the ESS is compared with this norm with the purpose of discovering whether the process contains elements that assure enforcement of accountability. After the comparison is done, it is possible to formulate constructive proposals about how the enforcement of accountability can be improved.The thesis also explores how networks, consisting of actors with particular resources, surrounding the ESS-project affects the form of the policy process, e.g. in shaping the social construction of the aim and purpose of the project.

Pictures are often used when marketing a tourist destination. Photographs of a place, a destination, are used to convince customers and stimulate daydreaming in order to turn a potential customer into a real customer. For some people the photographic representations of a place is the only one they experience. With this in mind, it is reasonable to question how representations of places and geographical imaginations are being (re)produced when marketing a destination by using photographs. This paper aims to study how representations of place and people are used when marketing a tourist destination via travel commercial.

The purpose of this thesis is to find out the reasons and perhaps some answers to the problem as we see it, the sickness benefit expiration of those who experience this. By this said we have also taken into account the different laws and adjustments in the long-term sickness benefit, but also major reformation of the security net in the Swedish society. The efficiency of the law on passive long-term sickness absence was added in July 2008, but was later in January 2010 supplemented. The purpose of this law wasn?t only to reduce the long-term sickness absence but also to reduce exclusion.

This thesis strives to demonstrate my increasingly phenomenological approach to musical composition in relation to the extensive body of musical works connected in different ways to the poetry collection ORDER by the Swedish author and play-wright Lars Norén. The hand, the touch, the voice, the space (environment) and its philosophical implications are scrutinised from a poetic perspective (my poetics). The question of language (the word), the sign (text), sound/noise/music and its immanent bodily qualities are focused and questioned in my own work as well as in primarily two case studies of the music of Pierluigi Billone (1960-) and Morton Feldman (1926-1987).The text reflects the emancipatory process my music has undergone the last 4- 5 years: moving away from language and text (representation) to body and sound, although preserving and nurturing the extended idea of the sign (as signification of sound and body) as a possible embodied vehicle in my composing and artistic thinking.The reader is invited through the extensive use of sketches and work methods to witness and follow this process as a manifestation of the ?doing? rather than the presentation or construction of an analysis in an academic sense.The thesis offers no solution and it fails to encapsulate all of the so-called ORDER-MUSIC (the music that is connected with Norén's collection of poetry) Instead it proposes a possible way of ?opening? the process to a basically phenomenological methodology inside the musical field of score based chamber music..

The purpose of this study is to evaluate an existing user interface. The company in question has a web-based user interface (available through logging in via their website), but they are interested in making the process of using the interface more convenient and the interface more accessible, so that users without a background in computing can properly manage the interface. At the same time they want to apply additional functionalities in order create and to manage increased traffic on the company?s website. For this reason it is important to take into account the issues involved in human-computer interaction (HCI) as well as aspects of cognitive psychology in order to make the tool and the web interface more usable, more motivational, and therefore more efficient and professional.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

A Road project?s frame is built up of a decision- and consultation process, where the results of the preparatory studies are being discussed. The aim with a consultation process is that all theopinions and knowledge from the operators' will be taken into count in the basis of information, that is needed in order to the different involved operators' to take a decision.The aim of the essay was to investigate how the decision- and consultation process for a road project, the E4 section between Uppsala Läby, turned out. The aim is also to bring up how theprocess could have been done more correctly. The study was carried out through a qualitative method with an analysis of materials from the National Road Administration's archives, the associated Environmental Impact Assessment (EIA) and through interviews of the different operators.My theoretical basis has been a Stakeholder Analysis and its principles, and theory about different executions of social planning.The result showed that the decision- and consultation process has been bursting in democracy and consideration taking of the different operators' opinions, has been poor from the developer?s, in this case the National Road Administration's, side.

The aim of this study is to evaluate an alternative projection of the Medial Coronoid Process (MCP) of the canine elbow joint. The projection (Di35M-PrLO) was, to my knowledge, first mentioned in an article by Haudiquet et al in 2002. In that article the projection was tested in vitro, and a good sensitivity was showed for the Medial Coronoid Process. The projection might be helpful in cases of suspected Fragmented Coronoid Process (FCP) . This study is divided into three parts. The first part is an in-vivo test of the projection, including technique and subjective evaluation of the outlining of the MCP.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

The overriding purpose of this graduate thesis is to evaluate if municipalities and county councils can deviate from the legislation of public procurement during procurement of customer choice agreements within the health and social care area. The intention of this Quasi-market is to provide the users with competition in terms of quality rather then the general principal rule of economic value.My conclusion results in a legal situation without rules of general procedure. So far the authorities make their own regulation in the field of customer choice agreements. The problem lies within the authorization of new contractors and their right to make an appeal against resolutions made by the authorities social care divisions.One solution is to legislate within the present law of public procurement. Another way to solve the problem is to create a lex specialis apart from the present public procurement regulation..

Degree project in Logistics, 30 credits, The Business Administration and Economics Programme, Linnaeus University, 4FE05E, Spring 2013Authors: Ida Nilsson & Malin Skacke Tutor: Peter Berling Examiner: Helena ForslundTitle: Increased profit potential by controlling customers? ordering patterns -­? A case study at OatlyBackground:Oatly manufactures and sells oat-­?based products and deliveries are today carried out through an external distributor. The company is going through a re-­?organisation and will in the future be managing stock keeping and planning of deliveries with their own resources. The customers? present ordering frequency and volume differ substantially, leading to unnecessary costs.

It is becoming increasingly important for companies to meet customer demands due to intense competition in today's global market, that forcing companies to improve their offerings and become better at managing their supply chain (Shen et al., 2006).  Long lead times can be reduced by using different methods and strategies shows various researches. Lead times occur in the planning, production, inventories and handling of products (Treville et al., 2003).The aim of the study is to develop a method to analyze the factors that affect the length of internal delivery lead time in manufacturing companies. The method also included suggestions for reducing delivery lead-time to internal customers.The main factors that influenced the length of the on delivery lead times has summarized to make a selection among the factors that can have the most significant impact. The selected elements will be used as a method to analyze how these areas affect a company?s length on internal delivery lead times.The study shows that the causes of the long delivery lead times was the location of the customer order point, uncertain forecasts, long material and production planning time, and long waits in the production and storage.The delivery lead time, according to this report?s suggested improvements reduced by centralizing CODP and makes more reliable forecasts.