Den här uppsatsen är ett försök att ringa in och samla ihop tankar kring vad det är att vara närvarande på scen samt hur man kan lära ut det. Arbetet innehåller citat och referat från intervjuer med sju personer: En skådespelare, en koreograf, en jazzsaxofonist och improvisatör, två sångerskor och sångpedagoger, en sångerska och låtskrivare samt en klassisk altviolininst. Här finns också citat och referat ur relevant litteratur. Arbetet ska ses som en ingång till ämnet snarare än en djupdykning..

Utvecklingen på den teknologiska marknaden har kommit att påverka företag i en allt större utsträckning då marknadsföring på Internet blivit allt viktigare. Den ökade använd-ningen av smartphones har bidragit till att fler och fler människor ständigt är uppkopp-lade vilket i sin tur har öppnat upp för nya sätt för företag att skapa relationer och att inte-ragera med sina kunder. En bidragande faktor är sociala medier som har öppnat upp för interaktion där företag och kunder kan kommunicera med varandra. De har även öppnat upp för kommunikation kunder emellan, vilket både skapar positiv och negativ word of mouth. I takt med utvecklingen av den nya telefonin, har mobilapplikationer kommit att få en allt större betydelse som marknadsföringskanal.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

Package design constitutes an important marketing and differentiation tool in an increasingly competitive food market, particularly in the category of daily consumer goods where the turnover rate is high and the purchases are based on self-service (Hine, 1997; Spethmann, 1994; Underwood, 1999). Media fragmentation undermines the traditional marketing tools and the demands for packaging are bigger than ever. A package must not only sell a product, but also tell, through design, how the product is used and express the values that the trademark owner wishes to convey to the end customer (Underwood, 1998). The understanding of the role of packaging as a marketing tool has increased, but the initiators inside the packaging industry in Sweden still think that the Swedish packaging industry is developing slowly. They often describe Swedish packages as homogeneous and unimaginative.

Abstract This qualitative interview study focuses on job coaching by examining what thoughts, views and opinions the involved parties, such as job applicants and job coaches, have of the contribution. The aim is to highlight the obstacles and opportunities by examining the expectations that exist from both parties as well as how to look at job coaching and its different areas. In this context, examine the similarities and differences between the two parties approach to the contribution. This is made possible through four interviews with job applicants as well as four interviews with job coaches. A grounded theory inspired approach was used to obtain the results of the study.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

En ökad kundmedvetenhet och den ökande globala konkurrensen har gjort att det blivit allt viktigare för företag att bemöta och vårda sina kundrelationer. Detta har gjort att fler företag väljer att arbeta med Customer Relationship Management (CRM). CRM är ett verktyg som blir alltmer vanligt då det hanterar och vårdar kundrelationer och kan ge en betydande konkurrensfördel för företag. Tidigare studier hävdar att CRM kommer att ha en betydande roll i framtiden för läkemedelsindustrin på grund av dess komplexitet och industrins hårda konkurrens. Trots CRM:s ökade betydelse och att företag runt om i världen inversterar stora summor pengar på CRM har resultaten av implementeringen ofta visat sig misslyckade eller overksamma.

We are always surrounded by space, not just only in a room with four walls, but also when we are outdoors.Constantly we move in a flow of space that changes whenever we move. Unaware we are affectedby this threedimensional surrounding of ours, and it reacts with our perception. Many times, we chooseto translate it into something two-dimensional, for example when we take a photo, recording a movie orframing a view with a window. It helps us to catch a moment, a piece of reality and restore it in our ownway. In this project I?ve chosen to explore this process, to interpret and create my own theories about thistranslation from space to a two-dimensional surface.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

The manufacturing industry is currently in a short-term downturn while the competition is increasing. The result of this is that companies must find new ways to bring out their products. Traditional competitive strategies, such as low pricing, is not sufficient today as the customer is inquiring something more than just a good product. Higher demands are presented on an accurate, well functional, communication between customer and companies, as this has become an important strategic factor in achieving long-term profitability.The aim of this independent project was to analyze and evaluate the communication process between a company and its sales companies.In order to illustrate this process, a case study was carried out at Alfa Laval, their sales companies and employees at their distribution center in Tumba. In order to see the differences in attitudes between the management, the sales companies and the employees regarding communication and involvement a gap analysis were used.The theoretical part of the study considers theories about business mission, communication, involvement, quality and creating value.The result showed that a smaller gap exists between the sales companies and the management while a slightly larger one exists between the employees and the management.

The use of Web applications is a growing area. While the possibilities and functionalities are increasing, so is the complexity of them, together with the threats against them because the complexity also opens up the application to vulnerabilities. It is therefore important for developers to know how a web application can be developed with security in mind.This study?s intention has been to create an introductory documentation of what kind of techniques that exists which can produce higher security, which methods there can be within the development process and what to think about when programming secure web applications. In this paper we have investigated how theoretical manuals in the IT security department handles that area, and interviewed two developers from two different companies to see how they use security in their web applications.The study has an exploratory technical perspective and does not explain how to practically use and interconnecting different security-enhancing technologies, but is more suppose to give a first glance at what is available and sow a seed for those interested to continue reading further about the subject.