AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

As collaboration between companies move beyond the single transaction into more long-term relationships the consequences of a company's control system become more complex. The aim of this paper is to provide an understanding of how intra- and inter-organizational control and work practices interact through examining how a company's intra-organizational control influences its customer relationships. The empirical research is performed through a qualitative case study where interviews have been conducted with management and sales staff within the case company as well as with one of the customers. The empirical findings have been analyzed using frameworks and theories regarding management control and customer relationships. The study reveals that the intra-organizational control of the case company affects its relationships with customers in a number of ways.

Abstract?Understand the customers value in use ? A multiple case study of three industrial companies? or ?Förstå kundens bruksvärde ? En multipel fallstudie av tre industriella företag? brings out the problem that it is easy to assume, what the value is for the customer.The questions asked for this thesis are:? How does the companies in focus, gather information about what effects the customers value in use?? How do the companies use this information in their business?The purpose is to examine how some industrial companies gather information about the customer?s value in use, on the bases from the five activities from Porter and how they can use this information.Three semi structured interviews were made for this investigation, with representatives from Atlas Copco Rock Drills, IL Recycling and Johnson Pump.The conclusions are that to gather information about the customers value in use, the company must work close with the customer. This information helps the company to improve their products, services and their relationships..

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

Mobile TV ? is the introduction on the Swedish market about content and customer relationship? This study explores and defines key factors of decisive importance for the introduction of mobile TV in Sweden, using the TAIDA model. In order to summarize and analyze the factors, four interviews with key actors have been carried out. The answers have been compared to generate the two different criteria that are used for presenting four different scenarios. The purpose of the study is to constitute data in the decision making process.

Title: The appraiser?s choice of valuation method ? factors that influences the choice of company valuation methodsSeminar date: 04/06/07Course: Master thesis in Business Administration, 10 Swedish credits.Authors: Anne Benedicks and Veronica ÖbergAdvisor: Eron OxingProfession of category: Financial analysts, auditors and company lawyers.Key words: Company valuation, valuation methods, cash flow analysis, comparative valuation, the net asset value method.The Main Issue: What is of decisive importance when choosing a special company valuation method?Purpose: The purpose of this paper is to identify, analyse and evaluate the most common methods of valuation for financial analysts, auditors and company lawyers and those factors that influences the choice of method.Method: A multiple survey has been implemented for the actual profession categories. Primary data was collected through semi-structured interviews and a questionnaire survey.Theoretical: The theoretical frame of reference is based upon the paper?s dependent variable, i.e. the role of the appraiser.

Title: The customer?s contribution to the innovation-process ? a study of using customers to discover latent needs. Level: Final assignment for Bachelor Degree in Business Administration Author: Robert Klein Supervisor: Agneta Sundström Date: 2014-06 Aim: The purpose of this study is to gain enhanced understanding of what knowledge costumers contribute with in an innovation-process lead by a producer of goods, and how that knowledge is used to fulfill latent needs. The area of research has formerly described which results customer-involvement lead to, but have been scarce in describing how results are produced. Method: From a qualitative onset, a case-study collecting data through observations and interviews capturing customer knowledge contributions, and producer use of fetched knowledge has been conducted. Data has been analyzed using a grounded theory approach. Results have been processed in several steps in which material has been categorized and enriched continuously. Result & Conclusions: Customer-knowledge is broken down into market-knowledge, everyday-knowledge, and specialist-knowledge, which all are significant to a producer of goods.

The ski resort is a business unlike any other. While providing the customer with a service, it produces the service in a manner that in many respects resemble the traditional producing company. Therefore, since the challenges facing the ski resort are a mixture of what can be found in these different environments, this study aims to investigate the applicability of Lean principles in this context. With a qualitative approach based on direct observation, combined with survey data from 2819 respondents, we evaluate the expected effects on customer value of ten commonly defined Lean principles. The study finds that although Lean theory can help disseminate customers throughout the resort and provide greater transparency, the nature of the operations calls for caution.

Title: Satisfaction and loyalty from a customer viewpoint Level: Final assignment for Master degree in Business Administration Authors: Thomas Blomqvist and Per Nilsson Supervisor: Lars-Torsten Eriksson Date: Januari 2010Purpose: The overall purpose of our paper is to describe Alfas customers based on the level of satisfaction and loyalty. We also want to find out if there are specific characteristics of customers with a high degree of satisfaction and loyalty.Method: We have used both secondary and primary data in the paper. We started with a review of relevant literature to seek knowledge in the field of customer satisfaction and customer loyalty. Thereafter we conducted a prestudy by interviewing three of Alfas employees, and finally we conducted a quantitative survey on Alfas customers. The results were analyzed and compared against current theory of customer satisfaction and customer loyaltyResults & conclusion: The results suggest that Alfa is successful in meeting customer expectations in service delivery, even if we can confirm differences in outcome between the three businessareas.

Customers put their printing suppliers to severe claims for shorter production time and faster deliveries.Printers always look for new solutions to increase the satisfaction of their customers. Oneexample of such a solution is web to print, where the customers book their printed matters atInternet.The solution involves design of printed matter by using templates that are made unique for thecustomer's printed matter. Web to print is suitable for reiterated printed matters. By using templatesthe customer doesn´t have to redo their layout for every new edition. Bromma tryck AB hasinvested the system CiPublisher, which is applied for the customer to make their printed matter atInternet.The purpose of the examination work is to investigate the needs of the customers of Brommatryck for a web to print solution and how such a system should be adapted.The result shows that the customer who is in need of a web to print solution wish such a system tobe easy managed and also usable.

Background: As Porter?s diamond (1990) suggested, the business environment highly influences firms? strategies. Today, most of the companies have to decide their strategy depending from a worldwide business environment. Yet, strategy researches and the growing importance of marketing for business success also show that customer dimension must be taken into consideration. On some markets and in certain industries, the offer is much higher than the demand and then, companies need to attract customers.

ABSTRACTTitle: Senses strategic importance to the customer experience in dressing roomAuthors: Anna Andersson & Alexandra LundqvistTutor: Dr. Bertil Hultén, Associate Professor Linneaus School of Business and Economics Linnaeus UniversitySubject:  Bachelor thesis 15 hp. Business Economics C, Marketing. Linnaeus University, spring 2011Presentation of the question: Is it possible for companies to enhance customers experience in dressing rooms by strategically working with the senses?Purpose: The purpose of this paper is to describe and analyze the senses relevance to the customer experience in the dressing room and create an understanding of the dressing room from a customer and business perspective.

Purpose                           The purpose of this study is to create an understanding of how e-commerce companies use loyalty programs in order to retain their customers and to increase its consumption, and compare this with customer perceptions of loyalty and learn what makes them loyal. Theoretical framework      The theoretical framework starts with definitions of loyalty and customer loyalty. Further, it discusses what a loyalty program is, how rewards today and in the future affect the consumers, and other promotion offers that are commonly used. The theory also discusses how previous points work in e-commerce. Method                                                    To take advantage of the companies? point of view and at the same the customers? perspective, the survey is based on a combination of a qualitative and quantitative study. In the study, two companies in the fashion industry were interviewed and 391 respondents participated. Empirical study                 In the empirical study the interviews with the two e-commerce companies are first presented, which revolves around their use of loyalty program.

The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.