The aim of this essay is to give a picture of the extension work at Partille Public Library, asit is today, as well as to investigate if there is a need to reconsider the way of working at thelibrary.Qualitative interviews have been made with the extensive librarians and certain local governmentpoliticians, borrowers and personnel at hospitals as well as other institutions.The extension work at Partille Public Library corresponds quite well to the intentions whichare stated for the work in certain important investigations made by the Government. Theborrowers and the personnel are quite satisfied with the work and are only pointing out a fewviews on changes. The politicians mean that the aim of the extension work of the library ison one hand to give service to certain more or less neglected groups and on the other handto reach new book readers..

The aim of this master thesis was to examine the European Commission's information resources from a user perspective in order to clarify the needs and circumstances of the search of EU-information among students at Örebro University. 41 students participated in a survey, and four of them was interviewed. On the basis of Pendelton- and Chatmans theories of information behaviour in small worlds, it were assumed that the students' education and citizenship in the European Union affected their needs and the search of EU information.The study showed that the students needs for EU-related information has increased, with the current education, but also been linked to earlier educations. The students Citizens need were mainly associated with elections such as the EMU-election, but also in some cases to a need of the general knowledge.A review of the European Commission's information resources were made with an emphasis on European Documentation Centre, EDC. The survey showed that most students used the EDC and the EU-databases that was made available by the European Commission through the EDC and the university library but were not aware that they used EDC.The survey also showed that students made use of familiar sources and resources when they searched the EU-information, such as the library's regular database list, the library catalogue and search engine on the internet are not requested of other resources.

This report is about a couple of specially chosen peatlands in eastern Uppland, Sweden. It concerns their development between the year 1922 and 2012. The historic fact originates from a large investigation of peatlands in the south of Sweden made by the Swedish Geological Survey, SGU, in the 1920?s. To be able to choose peatlands an analysis in GIS were made, in which we were able to find locations good enough for our field investigation. During the field investigation we bore to find nice peat cores that later went through several analyses in a lab.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

The aim of this report was to investigate the economy of passive houses. The work was focused on economy in total and on the economy of different components such as windows, insulation, heat exchanger and the air tightness of the climate shell. No attention was paid on the comfort factor or to the impacts on the environment.Two houses, aspiring to be passive were chosen; A big one and a small one. Hence, comparisons considering the size of the building have been possible to do as well.The comparisons were made by calculating ?break even? between two concepts; passive and BBR- concept.

För att uppnå god lönsamhet vid produktion av bostäder krävs ett väl fungerande produktionssystem. Ett sätt är att använda sig av industriella metoder där byggnadselement eller volymenheter prefabriceras i fabrik för att sedan sättas samman i fält. Tack vare ökad miljömedvetenhet och en strävan efter att minska energianvändningen har efterfrågan på passivhus ökat på senare tid. Swedehouse International AB (Swedehouse) har anammat detta genom att ha som affärsidé att starta en tillverkning av prefabricerade passivhus i betong, med hög färdigställandegrad som ledord. Denna rapport är en sammanställning av den information som idag finns tillgänglig inom området byggande med industriella metoder.

Diesel electric propulsion is in many ways a good alternative to conventional shaft propulsion, both economically and environmentally. There are also many other good side effects which need to be considered, i.e. better manoeuvrability, more efficient use of space and less noise on board. However, there are applications where diesel electric propulsion is not profitable. Large ocean going ships? profitability is much depending on fuel costs and the diesel electric alternative cannot compete on long journeys with large low speed engines.This thesis will treat the aspects of choosing between a diesel electric system and a classic mechanical propulsion system.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

Detta examensarbete utförs i sammarbete med ett företag som tillverkar produkter i polyuretan. Syftet med en av dessa produkter är att skydda kablar mot böjande samt axiella krafter. Företaget tillverkar idag denna produkt genom att tillföra gjutmassan underifrån, vilket leder till att gjutmassan trycks upp i konstruktionen. Detta är för att luftbubblor inte ska uppstå. Företaget har dock problem när det gäller tillverkning av produkten då den innehåller mer än tre ton gjutmassa.

This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

The purpose of this essay is to analyze how the Trojan prince Paris is described in the Iliad and in the movie Troy in regard to love and bravery. Thereafter an analysis of the similarities and differences between the Iliad and the movie Troy will be made. There will also be a discussion why there are differences between an epic story which was made for over two thousand years ago and a modern movie made in the twenty-first century. The differences will be based on the perspective ancient Greek culture versus filmmaking of the twenty-first century. The method that has been used is narrative analysis where the primary data, the Iliad and the movie Troy, have been interpreted.                        The Trojan prince Paris is described as a young, handsome man driven by his passion for Helen.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.

 Vi tilldelades detta projektet av Kalmar Sjöfartshögskola. Projektet var att tillverka en bullerkarta för skolfartyget M/S Calmare Nyckel. Då skolfartyget inte överskrider 500 bruttoton krävs ej en bullerkarta enligt Sjöfartsverket, men det fanns en förfrågan och önskan från skolan att tillverka en för utbildningssyfte och få en praktisk anknytning. Vid dem mätningarna som krävdes ombord rättade vi oss efter ISO 2923:1996(E) samt Sjöfartsverkets författningssamling 2005:23 vid tillverkning av bullerkartan. Skolan tillhandahöll oss med godkänd mätutrustning samt mätprotokoll.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

In this essay we have approached the problem with retailer brands that copy marketing leaders to get consumers attention in the storeshelf. We have sought to explore how much a designed package would change the consumers opinion of a brand and if this effect is different depending on if the brand is a retailer brand or a market leader. Also we sought to find if this effect would be greater with a salient color on the package. We made a quantitative study and with regression analysis we found that a designed package did have effect on the consumers opinion of the brand, and that the design with the salient color made the biggest effect..