This thesis work is about how technical consulting companies can accept their organization before a coming recession. Technical consulting companies are together with the rest of the actors in the construction business constantly depended on the current economic situation on the market. How to adapt the organisation depends on the current situation on the market.To adapt the organization in the best way possible the companies need to recruit and educate personal. It is then very important to find a solution on how the current change of generation in the companies will be handled. The large and very much competent group of 40-talists will in a few years retire.

Through a thorough analysis of the current situation, we have highlighted differences inworking methods for the various workshops and drew up proposals for improvements incombination with a practical work description that can be implemented in the company..

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

The purpose of this thesis is to examine whether the concept of permanent establishment, as defined in Article 5 of the OECD Model Tax Convention on Income and Capital, is applicable to electronic commerce and if so whether the current definition is able to appropriately deal with the challenges of electronic commerce.In 2003, the OECD added a new section to the Commentary on the Model Tax Convention on Article 5. The new section is a clarification on the application of the permanent establishment definition in electronic commerce.The current definition of permanent establishment in the Model Tax Convention relies on the physical presence of a foreign corporation as the threshold for source taxation. While the current definition, prima facie, might be applicable on electronic commerce, the highly mobile nature of electronic commerce might affect the current revenue distribution equilibrium between states..

Storing kinetic energy in a flywheel allows for more efficient driving of electricvehicles. Research in this area is in progress at Uppsala University, where a flywheelwith magnetic bearings encased in a vacuum chamber is being constructed. To makethis possible methods for measuring the current through the electromagnets in thebearings and temperatures in the flywheel need to be developed. This has been thepurpose of this report. The current measurement resulted in a resistive method, andthe implementation of eight measurement circuits in the system.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

The purpose of this thesis is to analyse and propose improvements to the cost accounting system in use at an airline operating on the Swedish market. The choice of study object is based on the airline?s desire to have its cost accounting system evaluated. During the analysis we have identified a number of points where the current cost accounting system does not correspond to its intended purpose. These points include significant groups of costs not being considered in the current system, potential over capacity is not visible and logic connections between distribution keys and the use of resources are sometimes lacking.

The purpose of this thesis is to analyze and propose improvements to the current procedure for cost estimations of purchased maintenance work at Banverket, the Swedish rail administration. This governmental institution is responsible for the procurement of maintenance services for the country?s railroad network through open tenders. Due to the generally low number of contractors, it is particularly necessary to establish accurate cost estimates in order to assess the offers and ensure that a fair price is being paid to the suppliers. Several flaws associated with the current practice are identified and analyzed according to cost accounting theories.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

I detta projekt undersöker vi om man kan bygga en maskinaktivitetssensor medhjälp av en enkretsdator som genom en accelerometer mäter en maskinsvibrationer. Sensorn skall generera en statussignal. Accelerometern ger enmätbar signal baserad på maskinens vibrationer. Enkretsdatorn används för attsampla, transformera och analysera signalen och generera statusinformation.Med LabView kan vi spara, studera och analysera olika signaler och olikatransformer. Vi studerar maskinvibrationer i LabView och beslutar att 5 kHzsampling räcker för att fånga intressanta vibrationer.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.