In motion ?a traffic program for Nacka is the result of a survey of the traffic system and transportation situation in Nacka and suggests possible development opportunities. A new traffic strategy will be developed in the municipality of Nacka the coming years, which is the reason for this study: to map the current situation, identify strengths and weaknesses, needs and opportunities. This program suggests possible development opportunities and gives an historical overview of the transportation system, the current situation and an analysis of different transportation modes. A mapping of other municipalities? traffic strategies or programs have been done and included into the program as well as a prognosis for the coming years in the municipality.

Syftet med denna empiriska studie är att undersöka hur lärare kan erbjuda möjligheter för 6-åringar att vidga sin förståelse av likhetstecknets innebörd. Undersökningen är inspirerad av Learning Study metoden vilket är en metod som har sin utgångspunkt i variationsteorin. Barnens initiala förmågor analyseras före planeringen av undervisningen och det ger en uppfattning om barnens kunskaper. Utifrån det planeras lektionerna och de aspekter som är de mest kritiska för barnen lyfts och på så sätt utvecklas deras kunskap. Vår slutsats är att det är viktigt att arbeta utifrån ett variationsinriktat lärandeperspektiv.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

In today's society it is becoming more and more important with direct marketing. Some of the direct marketing is done through e-mail, in which companies see an easy way to advertise himself. I did this thesis work at WebDoc Systems. They have a product that creates web documents directly in your browser, also called CMS. The CMS has a module for sending mass e-mail, but this module does not function properly and WebDoc Systems customers are dissatisfied with that part of the product.

The process of value creation is rapidly shifting from a product- and firm-centric view to personalized consumer experience today. Informed, networked, empowered and active consumers are increasingly co-creating value with the firm. The interaction between the firm and the consumer as well as the experience factor plays an increasingly important role in determining the success of a company?s offering. In this study, a special type of co-creating experience is investigated - ?omstartspex? - where the audience is interacting with actors during the play.

There are regulations in sweden that require organizations to manage occupational,  health and safetey (OH&S) issues in a systematic way. The contents of the management system vary depending of the activity of the specific organisation. An accurate management system is crucial in order to assure that rules and regulations are fullfilled. The OHSAS 18001 standard covering OH&S management is intended to provide organizations with the elements of an efficient OH&S management system. The work with this thesis was done at Swemat AB in Härnösand wich is a mechanical industry. In the thesis, the requirements of the OHSAS standard are compared with the current management system.

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

AbstractThe object of this study has been to analyze how companies within the music industry can successfully market their artists, this due to the complexity of today?s marketing environment, where technology has rapidly changed the way of communicating, and therefore contributed to a highly competitive market. The vast change of technology has resulted in several possibilities as well as difficulties breaking through, what could be seen as, a media sorl. Our purpose has been to outdo how companies market, as well as which factors that are vital, for a successful promotion of their artists. To be able to carry out our aim, we have created one key question; How can companies within the music industry market their artist to make them reach success?We have used a qualitative research approach for this study, this to be able to generate more depth concerning the chosen topic.

In Sweden there are 560 000 disabled people over the age of 16, half of those are in use of some kind of mobility device.Living with a disability means that due to injury or illness you are having trouble functioning without devices or assistance in your daily life and has a big impact on the independence of the disabled user.The everyday life for disabled parents with young children are different depending on the type of disability and mobility device.Today there is no alternative to the stroller for the disabled user who use mobility advises. This causes problems when the disabled person on there own have/want to move the child.The following statement have been the cornerstone for this project: How to make it possible for a wheelchair user to move a child, in the 0-2 year, for longer distances with a focus on independence and safety for both adult children?Due the process, of industrial design, this question and problem have been solved during 10 weeks. The process have contained parts as meeting with users, analyzing, concept development, evaluations, mock-up making, testing, shape & color development etc. This in the end have resulted in a full scale model of the appearance of a proposed product.The result is a stroller witch can be connected to the users specific wheelchair due two one time adjustments.

Small scale internal consumer tests provide a company with a cheap way to get valuable information regarding their products advantages and flaws. Therefore the demand for possibilities to do this kind of test has increased. This report is part of a new sensory project at Unilever. It presents a method for sensory comparison of the company?s own products with the corresponding competitor products.

The purpose of this thesis is to investigate the two new phenomena; the pricing model Pay-What-You-Want (PWYW) and the launch of daily newspapers in the iPad. A quantitative study was conducted in order to examine what would happen if the PWYW-model where to be used by a daily newspaper for its iPad product, and what this would signal to consumers about the brand in terms of brand association and brand attitude. Furthermore, we have investigated which of these factors that are affecting willingness to pay in this PWYW-situation. Moreover, a secondary purpose was to test the two possible presentations of the digital newspaper in the iPad; Product and Access ? and how the results differed between these two.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.