The school is under constant change and school reform on the conveyor belt. In 2009 the Swedish government introduced new directives for the elementaryschool, including multi-national sample, written testimonials from grade one and grade with several grades rose from grade six. The purpose of this study is to examine currently active primary teacher perceptions of the pupils' learning and development might be affected by those earlier and clearer knowledge assessments, and how teachers perceive this reform on the basis of the Swedish school's motto "a school for all". The study was carried out with a phenomenological approach where the method has been depth interviews with five active primary teachers from grades one to six in a school. The results show that teachers perceive that the earlier and clearer assessments will affect students differently according to student performance and knowledge.

Abstract The main subject of this essay is conflicts at work and the effect it has on the employee´s health.  I can through various reports read that bad health at workplaces is too high and that conflicts are a reason. What can be done to the work environment so it will be better from a psychosocial perspective? Sweden has a regulation that makes the employer responsible to work for an improvement in the work environment; can these regulations be used in purpose to reduce conflicts?My first question concerns the possibility to establish preventive procedures in the workplace systematic work regarding to improve the work environment. My second question is about the obligations of the employer to attempt to reduce conflicts at the workplace and the third question regards the documenting and monitoring of conflicts and the preventing work to reduce them. The purpose of this essay is to clarify how conflict preventive work can be included in the Systematic work environment management.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

The assignment is issued by Scania Maintence AB seeking a new approach to detect power changes in their industrial processes. The work has taken place at Ångströmslaboratoriet and tests have been performed at Scania AB Södertälje.Today?s society consumes enormous amount of energy. In both economically and environmental view, it is important that the processes are effective, with high power factor. There are many ways to measure power in the industry, what they all have in common is that the installation is advanced, requires time and planning.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Modern technology and fast development of heat pumps, the hunt for savings in energy consumption and the strive for environmentally friendly energy sources, convenience, and financial profit, have made heat pumps a reasonable alternative for the heating of houses.When the heat pump starts it will consume a considerable amount of current, which may result in a short-lived voltage-drop if the power grid is weak compared to the start-up current.The company Fortum Distribution which owns and administrates electrical network is interested in an investigation that deals with heat pumps affect on the quality of electricity.The purpose of this investigation is to study fast electrical fluctuations (flicker) as a result of start-up currents for single as well as multiple heat pumps on the same electrical station and from this evaluate whether there will be any problems installing heat pumps..

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

With growing economies and better living standards in many parts of the world today, there is a need of expanding the capacity of generating electricity. The alternatives for renewable energy technologies are not fully developed and have still some problems to conquer.The company Minesto has developed a technology that is called Deep Green. It is designed to gain electricity from tidal currents. Deep Green works in a similar way as a kite that is attached to the seafloor with a moving wire. It contains of a wing that moves due to the water current.

Fredriksons Verkstads AB i Vadstena är en modern verkstadsindustri med kompetens främst inom plåtbearbetning, svetsning, skärande bearbetning och systemmontage. Verksamheten kan delas in i de tre delarna kontraktstillverkning, konstruktion och produktion. Kontraktstillverkningen består av serier till livsmedels-, medicinteknisk och verkstadsindustrin. Fredriksons Conveyor Solutions konstruerar egna produkter i form av transportörsystem till livs- och läkemedelsindustrin.Fredriksons kunder ställer i allt högre grad krav på reducerade ledtider och ökad leveransprecision. Syftet med examensarbetet är därför att försöka reducera Fredriksons interna ledtider för ett specifikt produktsortiment.Ett första steg i arbetet med ledtidsreduceringen är att ta fram bra utarbetade prognoser.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

Youth crime is a subject widely discussed in media as well as in the academic field of criminology. One of the topics within the research field of youth crime discusses how to effectively help young people leave a criminal lifestyle behind. It is within this topic that the focus of this essay lies. This qualitative study examines a community based program in the Swedish city of Malmö called Nya Vägvalet (The New Choice of Path, own translation), which works with juvenile delinquents and the issues that surround the youths lifestyle. The aim of the essay is to explore the foundations and methodology of the program, how the methods of the program are put into practice and how these methods compare to what current research findings claim to be effective factors in successful interventions.

In the government's bill on infrastructure for 2010-2021, the government presents that road investments should be prioritized before investments in the railway. The grants for operation and maintenance of the railways are much higher then in the last government's bill. Furthermore the current founding of investment in railways is higher then for road investment which is in opposite of the bill on infrastructure's directives. Therefore the purpose with my thesis is to find which factors that can explain how come the government has chosen to take these actions. As a model to help me achieve my purpose I have been using a modified version of the DBO-theory, where the basic factors to explain an action is Desire, Belief and Opportunities.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.