The purpose of this thesis is to investigate the European certificate of succession, and how it affects Swedish inheritance law. The European certificate of succession is a European document that will be introduced in august 2015 in the EU regulation of succession. The certificate of succession is meant to simplify the current process of cross-border inheritance by legitimizing the concerned parties, which according to the regulation are: heirs, legatees, executors of wills and administrators of the estate. According to the regulation, the member state of which the deceased had habitual residence shall have jurisdiction to rule on the succession as a whole. Since the certificate is a European document, it will have legal effect in all member states.

Thinning is the partial removal of trees in a forest stand prior to final harvest. The term can be divided in pre-commercial thinning where little if any volume is removed from the stand and commercial thinning where removals are intended to provide a positive economic result. From a silvicultural point of view, the goal of thinning is to enhance future crop tree quality by removing low-quality stems and providing sufficient space for the accelerated development of retained ones (Huuskonen & Hynynen, 2006). The goals of this study was to see if commercial thinning could positively affect the short and medium term timber supply (MTTS) in the Interior regions of British Columbia (BC), and whether or not Scandinavian forestry practices could be adopted in the BC context. The mountain pine beetle (Dendroctonus ponderosae Hopkins) has created significant forest planning problems in BC. The annual allowable cut (AAC) was raised to capture beetle-killed timber while still merchantable.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

Title:Comparison of databases ? Is the law an obstacle?Authors:Alexander Ankarberg, Applied Information Science.Tutors:Lars- Eric LjungProblem: Cross running databases is getting more and more significant during the development of the information flow. There are huge benefits if we start to use the technique that already exists. The law is today an obstacle, so what would happen if the law wasn?t so stern.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

The interaction between the driver, the car and the road is essential for the road safety. This case study focuses on the road condition and its effect regarding road safety issues. By studying and isolating the road condition aspect and its contributing role to the accident occurrence, the aim is to explore their relationship, as well as highlight the road parameters that are commonly associated with accident occurrence. This result will be used to develop and increase awareness of the impact of poor road alignment and poor road surface conditions on traffic safety, in order to prevent these accidents from occurring. The road parameters chosen for this study include side friction, cross slope and rut bottom cross slope, road texture, curvature, drainage gradient and rutting.The case study was limited to lv 360 in Va?sterbotten, where all accidents with an unclear cause of the accident were studied, between 2003 and 2012 were carefully studied and assessed based on the condition of the road at the time of the accident.

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.

In what way do pictures allow for freedom of interpretation and thoughts rather thanunderstanding reality in a high paced medium? Children today are exposed more thanever to images trough various media. Children?s culture in the digital world has, troughgames and apps, become more cross-generational than literature. Unfortunately, there aremany digital books that loose the story, as the creator gets lost in technology and/or ineducation and morals.

Huvudmålet med detta examensarbete var att undersöka om det för Södra timber är ekonomiskt hållbart att tillverka engångspallar till pelletsproduktionens tilltänkta säckningsanläggning i Långasjö, gentemot att köpa in engångspallar från en extern leverantör. Detta gäller då för 30 000 engångspallar om året.Intervjuer togs på Södra timber i Långasjö om vilket virke som var lämpligt från företagets sida att bli av med. Detta visade sig vara brädor av 19x75 mm och 75x75 mm. Dessutom beslutades i ett tidigt skede att en engångspall med måtten 1200x800 mm är en bra lösning då detta är europastandardens mått. Olika alternativ togs fram för hur man skulle kunna ta fram materialet och sänka produktionskostnaderna och avsåg då brädor 19x75 och klossvirke 75x75.

This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.