This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

Denna studie har som huvudsyfte att undersöka hur organisationer arbetar med flyktingbarn och på vilket sätt en pedagog med skapande inriktning (till exempel en musiklärare) kan arbeta för att förbättra flyktingbarns situation i Sverige och i världen. Studien utgår från tre intervjuer med människor som är aktiva inom tre olika organisationer i Sverige. Dessutom tar studien upp integrationsprojektet Tillsammans och jämför det med information från teoridel och informanternas information. Slutsatser som kunnat dras från resultatkapitlet är att om organisationer som arbetar med flyktingbarn samarbetade mer med pedagoger med skapande inriktning skulle flyktingbarns situation kunna påverkas positivt eftersom detta är en kraftfull kombination av kunskap och erfarenheter. Det kan också vara av betydelse att fler musikpedagoger får upp ögonen och också erbjuds kunskap som kan behövas vid arbete med flyktingbarn.

The aim of this study is to bring forward four teachers of Arts-education, their statements and reasoning concerning the condition and meaning of the subject of Arts-education along with their statements in relation to theory and earlier research, give voice and insight in their intentions according to what teaching of Arts-education should contribute to.The basis for the study is brought out of the dilemma that there, in the subject of Artseducation is ?crowding of matter? in the nine-year compulsory school, difficulties in selecting the importance of various subjects and different opinions between teachers, due to curriculum being modified in accordance with the development in society. The earlier research that this study relates to shows how teacher?s opinion of different subjects varies. My questions concerning the subject are the following;How do four teachers of Arts-education reason concerning the condition and meaning of the subject of Arts-education?What are the teachers intentions according to what teaching of Arts-education should contribute to?What are the similarities and differences between the statements of the teachers in this study versus the teachers' statements according to previous research?To find answers on my issues and questions I have made interviews with four teachers of Arts-education and have then put their reasoning and statements against theories , which  all concerns the creative process.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

Consultancy as a profession has always been a debated topic and has constantly been surrounded with a kind of secrecy. People have a hard time defining what consultants actually do and how they do it. It seems that they are simply waving their magic wands, performing wonders. We have therefore decided that the purpose of this study is to unveil the secrecy around the profession. By conducting interviews and analysing literature we have examined recruitment processes in three different consulting industries and their wanted personal characteristics.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the Creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

How does the criticism of landscape architecture in Swedish professional journals look today? Does it exist at all? What is criticism and what is its purpose? These questions have been the starting point for this degree project. I have found a lot of different answers among journals, books and websites, as well as in interviews with five persons that all have a relation to the landscape architecture criticism in different ways. These answers may look a bit disjointed at first, but are at a closer examination pointing in the same direction ? that the criticism of landscape architecture projects hardly exists today.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the Creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

During the 17th century the production and distribution of printed works increased in Stockholm and Uppsala. However, all works that the publisher wanted to print, did not reach the reader. This thesis aimed to show when, where and how printed books and dissertations did not reach the reader. To achieve this aim, aspects of several well known models showing systems of book production and distribution were combined and adapted to suit Swedish conditions in the 17th century. This combined model focused on processes of selection and was presented and used as a theoretical approach.

The so called democratic deficit and the lack of legitimacy have been at the core of the EU-debate in the last decades. Low turnouts in the elections for the European parliament and disapproval in the ratification processes of the latest changes of the treaties are examples of the citizens lack of confidence for the EU and continuous integration. In Nice 2000 the heads of the member states governments agreed to try to improve the democratic legitimacy in the EU and initiated a public debate aiming at proposals for changes in the decision making processes in the EU. In July 2001 the commission published a white paper with their view. A fundamental presumption in discourse theory is that language and language usage not just is a way to deliver information about ideas and behaviours.