The wood-living beetle Ceruchus chrysomelinus is a rare species connected to natural forests. In Sweden, it is red-listed as endangered (EN) and an action plan for its preservation has been done by the Swedish Environmental Protection Agency. In this work I have therefore investigated how a translocation of the species succeeded after 17 years. I aimed to study the species dispersal biology, its substrate preferences and the supply of suitable wood on this site. The study was performed during 2012 in Pansaruddens nature reserve close to Uppsala in Sweden, which is a spruce dominated forest.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

Few issues raise such an engagement as parking areas, both by the municipality, property- and car owners. For car owners, it is of great importance where to park his car. Parking is not simply about availability but also about safety, security and how it affects the urban environment.When the land will be utilized for building development, there are regulations in Chapter 8, § 9 PBL how parking will be provided. Property owners have an obligation to provide parking space and it shall be arranged in an equitable manner, on the site or near it, which gives an opportunity for shared parking facilities. The guidelines for parking that the municipality has adopted should be the starting point for the extent of that space for parking is required when a building permit review.The first thing you should look at, is if the property owner has ability to provide parking space at his own property, but this is not always the best solution in areas such as inner cities.

Forestry affects most of the forest-covered land in Sweden. In the landscape, the most common stream type is headwaters, which are important sites for many processes and organisms in both the terrestrial and the aquatic ecosystems. The aim of this study was to investigate how the abundance of benthic invertebrate functional feeding groups in headwater streams develops after clear-cutting and if it also is possible to detect a change in the composition of feeding groups. The study also attempts to determine what factors have an effect on temporal changes in abundance of these groups. For the study, 11 sites in northern Sweden were sampled for benthic invertebrates using a Surber-sampler, and for each site canopy-cover and pH was obtained.

In this study bone material from six stone ship settings and a total of seven deposits of bones from two sites on the island of Gotland have been analyzed. Four ship settings from the burial site at Gålrum in Alskog parish and two from Tängelgårda in Lärbro parish. The ships contained both cremated remains and inhumations.  Human remains were identified in five of the analyzed ship settings and a minimum of six individuals was identified in total.  Animals were found in three of the ship settings, where one of them contained only the burned remains of a dog. Two of the ships contained inhumations, one in Gålrum and one in Tängelgårda.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

A boom in horticulture characterized the 18th century in Sweden and Skåne. Parks and gardens were gradually built out to become, at the end of the 18th century, large and comfortable facilities which responded to European parks. During the late 1700s the new fashion came to Sweden. In Sweden it was named ?the English style? which directly refers to the English expression ?Romantic style?.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.