Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

In present-day situation many libraries use detectors so that they can be able to prevent attempts too take out books without registering them. The university library in Jonkoping is one of the libraries that have such a detector. But unfortunately it doesn?t always work correct and can also react on other things a part from books. This is a big problem since the library staff don?t have time to check all signals that comes from detector.

The milk production per cow has increased considerably during the last 50 years and due to the breeding for higher milk production also brings decreased reproduction efficiency. In a Swedish study 1996 it was shown that on average only half of all estruses were detected. Every time a farmer fails to detect oestrus it costs the farmer about 1200 Swedish crones and the need of means of detecting oestrus is therofore large. With this study we wanted to investigate if heart rate respectively crystallisation of vaginal mucus (arborisation) could be useful means of detecting oestrus. We monitored two oestrus cycles in four heifers.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

The piglet mortality rates have become a major issue in today?s pig production. While other production traits such as number of born piglets or produced piglets per sow have been improved, the mortality rate has escalated. High mortality rates before weaning does not only affect the economy but must also be looked at as both an animal welfare problem and an ethical issue. The background to this problem has been addressed many times, and its salvation has also been addressed by breeding.

Background: Folate is a water - soluble vitamin necessary for normal DNA synthesis among  other mechanisms. Folate deficiency can cause megaloblastic anemia resulting from abnormal erythrocyte d evelopment. At the Department of Clinical Chemistry, Linköping, analysis of folate is performed with Siemens ADVIA Centaur® XP which uses an immunochemical method with chemiluminimetric detection. Currently, the assay is conducted on serum, is poured off and frozen after 48 h and treated with light protection because folate is considered to be light sensitive.Methods: This study tested lithium heparin plasma for analysis of folate with Siemens ADVIA Centaur® XP with the aim to be able to perform a package of analyzes in anemia investigation from the same collection tube. Furthermore, the stability of folate was studied for up to 168 h and examined regarding light sensitivity.Results: Statistically significant higher values were obtained in the analysis of folate in lithium heparin plasma than folate in serum (p < 0,001).

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

This case study examined what impact the neurological disorder Asperger?s syndrome has on the line of reasoning about religion and spirituality. Also, the question of whether the four informants showed any tendency to use the cognitive tools calledtheory of mind (ToM), existential theory of mind (EToM) and hypersensitive agency detection device (HADD) or not was put forth. From the interviews five themes were extracted: a stereoscopical view upon the world, thoughts on physical causality, prayer used as one-way communication, spiritual agency and intentionality, as well as existential and social questions. These themes were subsequently matched with theories on ToM, EToM and HADD.

Under de senaste åren har en ny trend inom spelindustrin uppstått då en stor del av spelen har gåtttillbaka till de tvådimensionella miljöerna som var vanligare i tv-spelens barndom, detta tack vareatt mobiltelefoner och deras spel har tagit allt större plats på marknaden och de är oftatvådimensionella på grund av sin begränsade hårdvara. De tvådimensionella spelen har enligttradition inte haft någon dynamisk ljussättning, utan de har bestått utav färdig grafik medförutbestämda intensiteter vilket gör att spelen kan se platta ut.Men inom andra områden av spelindustrin, framförallt tredimensionella spel, har utvecklingen avdynamiska ljussättningsmetoder kommit långt. Problemet med dessa metoder är att de kräverobjektens normaler, vilka normalt inte finns tillgängligt i tvådimensionella bilder.Idag är mobiltelefonerna kraftfulla och klarar av mycket tyngre beräkningar än vad de gjorde förbara några år sedan. Därför undersökte vi möjligheten att implementera dynamisk ljussättning i etttvådimensionellt spel på androidbaserade mobiltelefoner. För att genomföra detta krävdes också attvi undersökte metoder för att generera normaler för tvådimensionell grafik.För att ett fullständigt spel skulle kunna skapas så implementerades också saker somkollisionshantering, artificiell intelligens och procedurell generering av banor..

The objective of the essay was to identify the nursing care required by a dog suffering from heat stroke and how to educate and advice the owners how to start treating their dog and prevent the condition from occurring in the first place. The essay is based on a literature study. Several databases were searched for scientific research to try find answers to the issues. Keywords concerning the subject were used and mixed in different combinations to sort out the suitable studies. The results of the study indicate that the dog should be cooled by the owner directly after detection. The most crucial issue is to reduce the body temperature as quickly as possible or the morbidity will worsen.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

The aim of the Master?s Thesis work is to study and develop algorithms for autonomous travel of a UGV (Unmanned Ground Vehicle). A vehicle for the mounting of sensors has been constructed in order to perform the work. Since the UGV is to be used outdoor in urban areas, GPS can be used. To improve precision and robustness, inertial navigation is used in addition to GPS, since GPS reception is likely to be diminished in such areas.

This thesis has been performed at Clinical Chemistry at Sahlgrenska University Hospital in Gothenburg. The purpose of the project was to investigate new and alternative ways to determinate synthetic cannabinoids by gas chromatography-mass spectrometry. Currently, the possibilities to quantify synthetic cannabinoids are very limited. This can lead to an increased use of synthetic cannabinoids as the risk of detection is low, which may be known by drug users. The synthetic cannabinoids are sold mixed with different herbs and have varying names like Spice Gold, Spice Silver, K2, Smoke and Pot-pourri.The synthetic cannabinoids analyzed were JWH-018 and JWH-073, which are commonly found in seized Spice material.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.