The Swedish carrot market is dominated by a few big companies and three of them stands for 50 % of the market. During the last twenty years the number of growers has decreased, the area and the harvest have increased. The big producers have invested in advanced and expensive postharvest equipment that fulfils the high standards of the food industry. Few carrot producers are members of an organisation and they keep contacts with there buyers one by one. The buyers are mostly wholesalers and these have during a long period of time decreased the number of suppliers.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction Costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

The industrialization in Sweden has increased the large number of areas that have been contaminated with various types of pollution. One of those sites are the property Höjen 3:24 in Arboga where ?Arboga Mekaniska Verkstad? once been. The property wants to increase the use of the old former foundry building with the adjacent ?plate-workshop? and believe there are two options for the building: That the building either should be used as a warehouse/concert hall, or rebuilt into a cultural center. An environmental evaluation has shown that the levels of heavy metals are over the Swedish environmental protection agency guidelines of less sensitive land.

Background: Operating on the stock market is associated with risks. If a particular asset is not traded with the same frequency as the average market asset, this particular asset is exposed to a liquidity risk. It means that the investor might not be able to sell the asset at a desired time without incurring expensive transaction Costs. The query is whether or not the investor is compensated with a liquidity premium for bearing the extra risk. Earlier studies on the Stockholm Stock Exchange have failed to prove that there is a relation between stock return and liquidity.

The city?s public environments are meant to be perceived as safe and inviting areas to visit any time of the day. In recent decades the number of vandalism complaints has doubled and graffiti has become so common that it received a separate category in the crime statistics. With this type of impacts in the public environments the experience are precarious and a boring sight. It?s difficult to put a price tag on these types of crimes, the number of unreported cases suspected to be large.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

Between 1965 and 1975 a major housing project was carried out in Sweden to resolve a major housing crisis, the so-called one million housing program (Swedish: miljonprogrammet). To raise the standards and create a more attractive housing in these areas is currently a very relevant topic in Sweden.Evidence-based design is the process of basing decisions of the built environment on credible research and studies to achieve the best possible outcome. This method is primarily used in the healthcare sector to improve quality of care and reduce Costs by creating healthy environments.The possibility of refurbish apartment buildings from miljonprogrammet using evidence-based design has been studied by means of an extensive literature review and a closer examination of the residential area, Husby in Stockholm, which has been chosen to represent the miljonprogrammet in its entirety. Furthermore, the evidence-based research has been limited to seven fields; nature, noise, color, wayfinding, safe environment, daylight and thermal comfort which has been assessed to be applicable on housing. In order to obtain a comprehensive overview of the different fields, four different subjects were chosen to investigate further within each field; research and studies, laws and regulations, constructional aspect and Husby.

Dimensional stability is an important aspect of fuel mechanical design and licensing of new fuel designs for nuclear power plants. Dimensional changes within the reactor can affect the safety margins against overheating of the cladding and the pellets, therefore it is crucial that the dimensional changes are kept to a minimum.The profits per produced kiloWatt hour continue to decrease for the Swedish nuclear power plants. Some reactors are even operated with a calculated loss. To reduce fuel Costs and thereby improve the profit some reactors are operated with higher uranium enrichment, so that the assemblies can reach a higher average burnup. This increases the neutron fluence to the pellets, cladding an spacers.

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating Costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

The choice between bare-rooted and containerized seedlings in southern Sweden affects the investment Costs as well as growth and survival. It is important to take these differences into account when choosing seedling type for reforestation. The most important differences between the two seedling-types is that bare-rooted seedlings has open root systems whereas the roots of containerized seedlings are grown in a container which may contain water and nutrients that are available for the seedling during the first period after planting. Moreover, bare-rooted seedlings are often older which results in thicker stembase and better resistance to attacks of pine-weevil (Hylobius abietis). In order to study differences in survival and growth between bare-rooted and containerized seedlings a survey study of newly planted clearcuts in south-western Sweden was made. In the study tree seedling types was included, one bare-rooted and two containerized with different ages. The population of pine weevils was probably low during the studied period which resulted in lower pine-weevil damage than normally found in this area.

Companies financed through borrowed capital are allowed a tax deduction for the Costs re-lated to their borrowed capital. A similar tax relief for companies financed through share-holder?s equity does not exist, why these companies are taxed higher than companies fi-nanced by borrowed capital. The result is that there is an asymmetric tax treatment of companies depending on how they are financed.The autumn of 2012, the Swedish government presents a proposal for an investor deduc-tion which seeks to equalize the above mentioned asymmetry. The proposed investor de-duction is a tax relief for investments in shares in a startup- or small company equal to 50 percent of the acquisition cost of that investment.The venture capital deduction, which in this thesis is treated as an alternative to the inves-tor deduction, is an interest-free tax credit which significate that two-thirds of the acquisi-tion cost is deductible from taxation at the time of the acquisition.

Introduction:By insight in the company and by monitoring the management, the board has an important function in creating trust in governance of the company. Furthermore, the board reduces the asymmetry of information between the owners and the management, which also is the function of the auditor, by auditing how the board governs the company and the accounting. In case the board does not effectively monitor the management, the auditor has to extend its monitoring, which increases the owners agency Costs through the audit fee. The board composition can affect how effectively the board practices the monitoringProblem: How is the audit fee affected by the board composition?Purpose: The purpose of this study is to explain how the board composition affects the audit fee.Method: The study uses a quantitative method, where the data was collected from the annual reports of 112 limited companies listed on the NASDAQ OMX Large and Mid Cap lists on January 2, 2012.