Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance Costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and Costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

The purpose of this study is to compare the economic differences between withdraw of forest fuel and withdraw of pulpwood in first thinning, to see which method gives the maximum profitability (income - cost). Another purpose is to investigate the economic impact of the thicket cleaning. The study compares four different methods: i) pulpwood output with thicket cleaning, ii) pulpwood output without thicket cleaning, iii) forest fuel output with thicket cleaning and iv) forest fuel output without thicket cleaning. The study was conducted in a 30-years old stand, dominated by spruce, outside Harg in Uppland. The method that generated the best economic net income was pulpwood without thicket cleaning. It generated a positive net of 1,383 SEK per hectare. Forest fuel output without thicket cleaning also generated a positive net in 720 kronor per hectare.

BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and Costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

BACKGROUND: A Pressure ulcer means much suffering for many people. It also leads to big economical Costs for the society. Therefore it?s of great importance to prevent pressure ulcers. If pressure ulcers are to be prevented nurses need to have sufficient knowledge about preventive strategies.

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and Costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

During the last couple of years it has been more important to reduce the driving on the field to prepair the soil after ploughing. The machine Costs are high so it is necessary to be effective. To reach a pleasant soilbed directly after ploughing is sometimes possible on easier soils but heavier clay soils always need more tillages. There is a lot of equipment mounted on the ploughs on the market, for example Furrow Cracker and Furrow presses, which makes a pleasant soilbed on easier soils. The last year Överum and Kverneland have presented knives which are mounted on the wing or moulboard.

I denna studie testas tio hypoteser som relaterar till finansiell teori för att se hur väl teorin kan förklara skuldsättningsgraden i små börsnoterade bolag. De teorier som testas är avvägningsteorin (trade-off theory), hackordningsteorin (pecking order theory) samt teorier relaterade till asymmetrisk information och agentkostnader. Testen genomförs med multipel linjär regressionsanalys och de undersökta bolagen är samtliga bolag med färre än 200 anställda på tre av de mindre börslistorna i Sverige. Resultatet visar stöd för åtta av de tio undersökta hypoteserna och är i flera avseenden tydligare än i tidigare studier som testar onoterade små bolag eller ett bredare urval av bolag..

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

The purpose of this master thesis is to map and analyze the appropriate valuation approaches used for Intellectual Property rights and develope a model for valuing patents. This project has been executed on behalf of Electrolux?s Group Intellectual Property and is intended to be used for managerial purposes.Project limitations include patents that doesent concern technology oriented products and services, real option methods, financial forecasts, decisions concerning patents taken by the R&D division, patent applications in general and taking into account unexpected future management decisions regarding patents.Electrolux?s Intellextual Property team applies, manages and protects the groups Intellectual Property rights including patents, designs and trademarks. With an increased globalization and the rise of emerging markets, incentives have increased further to protect and safeguard the group?s innovations.Mainly there are three different valuations approaches for valuing intellectual property rights, these include the income based approach, cost base approach and market based approach.

Entrepreneurship as playing a important role for economic growth has been discussed by a number of theorists such as Joseph Schumpeter and Israel M. Kirzner. William J. Baumol developed these theories as he considered that all entrepreneurship doesn?t lead to economic growth, some entrepreneurial activities may even lead to stagnation.

Bankruptcy is a problem for the society in form of high Costs for including suppliers, customers, employees, investors, banks, insurance companies etc. The purpose of this study is to confirm or dismiss a bankruptcy prediction model that has been developed in a previous Swedish study, in order to predict bankruptcy with help of specific key figures. The model has only been tested in a larger perspective where the population consisted of all small firms in Sweden, in this study the model´s reliability is tested by that it instead been applied to a minor perspective, where the population only includes Stockholm. With a quantitative approach of 12 different key figures from a total of 60 Swedish smaller registered companies in Stockholm between the years 2005-2007, has been studied. The companies are divided into two groups, companies with good financial health and companies that have ended up in bankruptcy.The results shows that the model is applicable in a smaller population, but some of the key figures do not generate essential or any type of information about bankruptcy, but the majority of the key figures in the model did.

This report is an examination paper in computer science at University of Växjö. The report will focus on the possibility to create adaptable systems and to cost calculate the work needed to modify a system to meet new demands. A project [demos] developed by Interactive Institute studio [12-21] in Växjö is the starting point in our work. They have during a period of two years developed a prototype of a system which intends to get youth and democratic selected representatives a communication platform where they may communicate with SMS. Today they are in a position when they want to develop the system for other user groups with slighter different purpose and to do that they need a more flexible system.

Recent studies show that manufacturing companies to a larger extent use historical cost accounting in their internal accounts, at the expense of calculated Costs. The explanation behind this is claimed to be that firms are subject to careful scrutiny by the stock market. Consequently, top management stresses the need of evaluating all parts of the firm from external accounting. However, lower management levels express a general concern that the incentive to invest in machines will decrease. This master thesis aims to investigate whether or not there is an objective reason behind this concern.