This thesis has been made in cooperation with Forsheda Stålverktyg AB which develops and manufactures injection moulds and diecasting tools. The main concern has been their Trading-system which provides them with considerable amount of quality lost function.Focus has to however be put on the analysis of the Trading-system due to the fact that this has previously meant various quality issues for the company.This thesis treats quality assurance of the Trading-system, identification of the problems in the process and improvements of these problems.Quality assurance is carried out when a company detects that their quality based costs become too high. Quality based cost are? the costs that would disappear if a company's products and its different operational processes were absolute? (Sörqvist, 2001 p.30, free translation from Swedish). High quality based costs often result in increased quality problems, which can lead to substantial economic loss for the company.This work has resulted in a thorough review of the Trading-system whereupon problems have been identified.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

After the deregulation of the Swedish pharmacy market customers can be lost due to stock-outs. Optimization of pharmacy inventory levels has thus become increasingly important. To minimize inventory costs while considering the cost of shortages the latter must be estimated. However, the shortage cost is very difficult to compute. Thus, the aim of this paper is to estimate the pharmacy-specific shortage cost parameter and its relation to other inventory costs.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

Earlier investigations showed that damages on timber from feeding rolls could be within the lower classes of damage according to VMRs classes. Knowledge about differences in productivity between kind types and aggressive types of feeding rolls is necessary because it should influence the question about damages on timber caused by different feeding rolls. In this study the production and timber damage in a harvesting head were evaluated at three levels of pressure (8, 10 and 14 MPa) on the feeding rolls, and with three different types of rolls. One type, the rubber cushioned steel plate roller had 10 mm studs and rubber damping, one ?middle? type made of solid steel with 14 mm studs, and one aggressive type, also made of solid steel with 18 mm studs.

I Sverige fanns, mellan 1874 och 1994, ett förbud mot att bygga bostadshus med fler än två våningar i trästomme. Under denna tid försvann större delen av hantverks- och ingenjörskunnandet och man fick därför börja från början då förbudet hävdes. Byggandet gick till en början trögt, men tog fart i och med regeringens nationella träbyggnadsstrategi och utvecklandet av byggande med massivträ i början av 2000-talet. Limnologen i Växjö är ett bra exempel på hur långt fram Sverige ligger i utvecklingen, men det pekar också på områden inom tekniken som behöver förbättras.Den här uppsatsen behandlar översiktligt hur trähusbyggandet har sett ut i Sverige och beskriver sedan Limnologen med fokus på entreprenadform, stabilisering, brandskydd och akustik. Vidare beskrivs hur massivträtekniken har utvecklats och hur byggsystemet för massivträ har tagits fram..

This paper examines the reasons behind firms considering backsourcing. While firms experience problems with their outsourcing activities, backsourcing emerges as an alternative solution. Firms primarily take cost considerations into account when reconsidering their outsourcing practices, but this only scratches the surface. A deeper analysis is needed, since cost increases arise from issues such as quality defects and cooperation problems. Even though production costs are low, outsourcing always implies transaction costs.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Housing cooperatives in Sweden practice very long depreciation times for their buildings and assets, subsequently depreciation costs are very low. This study aims at addressing issues relating to potential upward revisions of these costs and the revenue levels needed by housing cooperatives to address these changes, while also providing a detailed summary of some chosen financial ratios under different circumstances. This study's results are based upon recent (2015) market data within the Stockholm region, collected through a manual process and analyzed quantitatively. On average, housing cooperatives EBIT do not cover their financial costs and have low profit margins. The average depreciation time is considerably above what a technical evaluation by other sources may state.

The Göta älv-bridge is a welded steelbridge which is located in Gothenburg,it connects the inner city of Gothenburgwith the island Hisingen. Cracks wasdiscovered in the steel in 1999-2000which started an investigation of thebridge to clearify the condition of thebridge. The conclusion was a monitoringsystem based on laser light sent throughan optical fiber.This report describes the bridge, thedamages, the monitoring system and thetraffic on the bridge.Stefan Pup, at Vectura Borlänge was mysupervisor during this work. In myinvestigation the costs of themonitoring system and the costs ofclosing the bridge is compared andevaluated. The biggest investigatingpart is the costs of closing the bridge.The results of my investigations is thatclosing the Göta älv-bridge would cost 1107 300 SEK / day.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

Abstract ? ?Costs to consider in connection with the implementation of a new ERP system?Date: January 8th 2013Level: Master thesis in business administration, 15 ECTSInstitution: School of Sustainable development of society and technology, Mälardalen UniversityAuthors: Sanna Hellblom-BjörnTitle: Costs to consider in connection with the implementation of a new ERP systemTutor: Cecilia LindhKeywords: ERP-system, business system, implementation, implementation costsResearch question: What costs and issues should companies take into account in order to  establish a realistic budget in connection with the implementation of a new ERP system, and increase the chances for a successful implementation?Purpose: The purpose of the paper is to investigate the hidden costs that may arise in connection with the implementation of an ERP system that companies should take into account in order to establish a realistic budget. The paper will also examine how companies can reduce their costs and affect the outcome of the implementation. It should be investigated by means of interviews, reports and articles.Method: In order to answer the question in the paper secondary data is collected in the form of articles, books and reports. Primary data was collected through interviewing a company that has implemented a new business system, a company that performs implementations and a Senior manager of ERP Services.

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.