Moisture damage in buildings is a serious issue that leads to problematic consequences and high economic costs. Despite the knowledge and awareness existing about moisture problems, extensive damager still occurs today. Studies of moisture in the exterior wall constructions shows that the issue if often caused by rain and water intrusion. These kinds of problem result in major costs usually because the companies have to replace the material and structural components and also in some cases tear down large parts of the buildings.The work includes moisture theory and descriptions of four different exterior wall constructions, wood stud wall with plastered facade, exterior wall with wood facade, exterior wall with concrete, and exterior wall with brick facade. Our thesis work describes how the constructions are affected and moisture damage due to water intrusion.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

Problem: How do delivery logistics work in practice at the building site? Where are the big problems? How to make building logistics more effective? Do the site management and the haulers agree about questions concerning both parties? What is possible to gain by using better logistics? Is it possible to gain time with better logistics and by that reducing the costs? Purpose and aim: The purpose is to discover if there are any disagreements between the site management and the haulers. If disagreements occur they will be examined and probable measures based on the problems will be suggested. Another intention is to bring key ratios concerning time spent for deliveries forward. One aim is to update a similar report made in 1972.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

The aim of this thesis is to create an understanding of the incentives for forest companies to invest in reducing carbon dioxide emissions from deforestation and forest degradation, which is termed REDD. The Brazilian Amazonas was chosen as the base for the investment case. Brazil has the largest area of rainforest in the world, and also the biggest problem with deforestation. The Amazon region of Brazil comprises rainforest which is largely intact and unexploited. Accordingly, there is significant potential scope for prospective investments in a REDD-project, and so have a noteworthy impact in preventing deforestation.The research approach used the United Nation?s Clean Development Mechanism concept was used as a framework for ascertaining the investment costs in potential REDD-projects.

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Sweden needs a policy that stimulates economic growth. Year 1996 the Business Reorganization Act (1996:764) came into force. The goal with this law was to savebusiness, make it profitable and avoid unnecessary bankruptcies. Shortly afterwards itturned out that the law had no positive effect. A very few numbers of companies appliedfor reconstruction and the number of applications for bankruptcies continued to increase.In 2004, in order to stabilize the situation and bring about neutrality between twoproceedings, company reorganization and bankruptcy, the government proposed thereform of priority rules.

Energy losses are an essential part of a power grid company?s costs. From anenvironmental and economic perspective, it is important to reduce these costs. Toknow where efforts should be deployed, it is important to have good knowledge ofwhere in the network losses are situated. When creating network tariffs, there is alsonecessary to have a correct distribution such that the network customers that use acertain part of the network, only pays for the network losses in this area.

This essay deals with the topic options costs and whether such costs would arise for smaller companies now when they have the opportunity to choose not to have an auditor. Small companies are defined as companies that fulfill at least two of the following three criteria?s: less than 1,5 million SEK in balance sheet, less than three employees and turnover less than 3 million SEK. The decision regarding internal revision does not only affect the company itself but also other parties such as the taxation authority, banks and others that can be influenced by the decision. This essays main focus is on the influenced parties, especially the taxation authority and the banks as these have been highlighted in debates in media and because the small companies themselves may have difficulties to foresee the consequences of the new changes. The opinions from accounting companies will be considered in the essay as they can be considered as experts regarding the different aspect within this area.

The thesis has been written as a part of the Bachelor degree in Industrial engineering and management at the School of Engineering in Jönköping. The work is focused on the part of Husqvarna AB?s supply chain that is associated with the lorry transports to Italy. Husqvarna AB has approximately ten Italian customers, whose delivery patterns have been studied from January 2007 to July 2008. Some of the customers have a low delivery frequency and small amounts of goods that they therefore have not been fully analyzed in this report.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

AbstractAccording to several researchers finance is scarce, scarcer for small businesses than for big enterprises. Small and medium-sized enterprises, SMEs, that want to start exporting and sales or manufacturing abroad need capital to get ready. Which capital structure and financial costs do they have, and which forms of finance do they actually use for that purpose. New american research by Mansi, Reeb (2002) has suggested, that there is a positive connection between leverage and a negative one between financial costs and internationalization, and that a non-linear model better describes this connection.This study has gathered data in two ways: Through a questionnaire from 37 SMEs and balance sheet figures from totally 166 manufacturing SMEs. In order to examine, whether the company was active on the international market, 200 SMEs in south Sweden were asked, if they exported to, produced or sold on any other market than their home market.

People are usually directed towards each other in conversations, to make it easier to hear what is being said. Algorithms for voice and speech recognition works in a similar way, regarding the microphone direction towards the sound source. In this thesis in electronics has therefore a servo control with binaural sound localization been implemented on a microcontroller connected to two microphones.When people perceive sound, the brain can estimate the sound source direction by comparing the time taken by the sound reaching one ear to the other [1]. The difference in time is called the interaural time difference, and can be calculated using various techniques. An exploratory comparison between the techniques cross-correlation and cross-spectrum analysis was carried out before implementation.