In this thesis I have decided to take a closer look into my own ?backyard?. A river that runs through my hometown, Akureyri, has been a thorn in some people?s side. Glerá river has taken lives but it has also given the town possibilities to develop.

The energy that the earth receives from the sun hourly has potential to cover a year?s energy demand in the world. Further, this type of energy is environmentally friendly, natural and free of cost. This report covers solar energy in an urban environment and consists of a case study of installations of photovoltaic cells in a part of the city of Stockholm. It is mainly the economic aspects that are covered but there is also a discussion about the practical consequences and the sustainability as a result of integration of solar energy in an urban environment. The aim of the study is to present results from economic calculations for utilization of solar energy in chosen buildings in Kungsholmen in Stockholm.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

It might seem obvious that public opinions should be included in the planning process. However, it is not clear to what extent. Statutory forms of public participation attract little interest since many people feel that it is hard to make a difference. The purpose of this study was to engage those that normally do not get to speak their mind in the planning process. In this study, two methods for conducting ?on-street surveys? were investigated.

The financial crisis in 2008, effected companies around the globe and forced them to change their operational strategies, in order to survive. Companies with international links needed to consider external effects and due to that adapt their strategies on a global level. Demands for goods and service were decreasing and companies could only manage the cost during a recession to not face bankruptcy. Organisations need to reconsider their optimal strategy as this will determine their future outcome when managing a crisis as the one in 2008. British Airways - Air Cargo is a global company with an international network which serves about 80 countries, with about 200 destinations.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

The main purpose of the culture is to serve people and represent the people's social will and freedom. Culture does not exist in a vacuum but shaped and framed by political and artistic structures that are not neutral, and this is why the artwork itself cannot be an independent business. The public function of art can be understood as a defense of the ideals of democracy. But today, when political power is often replaced by hegemony, the role of art and functions are changing. How these changes reflect to the identity, reality and truth of society? What political functions are fulfilled when art becomes ?public?? The issue of democracy is linked question of people?s power in a democratic society where power is legitimized in social space.

The aim of this thesis is to accomplish a user study on how e-book users experience the electronic book, the e-book, as an instrument for reading fiction. The study is based upon qualitative interviews with twelve e-book users and a small survey carried out at the Stockholm City Library. The purpose is to identify the users' incentive for choosing the e-book as a medium for reading fiction, elucidate if and how the interface of the e-book affects the reading experience, and distinguish if there are any factors common to the users in their choice of reading e-books. How the users look upon the future of the e-book is also discussed. Among the people asked in the survey we note little if any demand for the e-book as an instrument for reading fiction.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

Forestry and reindeer husbandry are entitled to use the same land for their operations. For this reason, conflicts occasionally arise between them. Soil scarification is a forestry operation which has a negative effect on the occurrence of reindeer lichen. Reindeer lichens are of crucial importance to reindeers and reindeer husbandry, especially in the winter when reindeers primarily feed on different lichen species (Cladina spp. and Cetraria spp.).

Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

When discussing local development attention is often given to the problems involved. Factors like decreasing population and inadequate infrastructure are two examples. Local politics has, however, lately been argued to have possibilities to affect its own development and its chances to achieve growth. Some of the most important factors from this debate are to make a community attractive for people and companies, committed leadership, the local business world with entrepreneurialism and a good business climate. These factors serve as a starting point for this discussion where focus is on the possibilities to achieve growth on the local level and the politics that is used for this purpose.To illustrate the chances to affect local growth I apply the theoretical perspective of regime theory and thereby examine the governing coalitions "power to" govern and not "power over" as the earlier theoretical perspectives in the area.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..