The purpose with this study has been, based on different public and private procurement conditions, to measure if there are any significant differences in the business relations between public- and private institutional kitchens. Furthermore, to observe what important influencing factors there are to maintain and develop a relationship between a producer and customer. The result of the analysis shows that there are important factors that influences on the trust in the relationship between a producer and customer. These factors are product- and service exchange, communication, strategic purchase and social exchange. In this examination we have showed that there are differences in the relationship between public- and private customers.

The economic prerequisite to many farmers in Sweden after the EU membership and the new agriculture policy has generated large demands on the farm management. Until year 2004 you got a grant based on what you had produced and not on consumer demand. In 2005 a new economic aid (Mid Term Revue) was introduced and the conditions has changed again. Due to this I have chosen to do a cost-benefit analysis on a case, to investigate if the present production is sustainable in the future. My conclusion is that the profitability is acceptable even if the farm has a high debt. But to make the production more profitable the products produced should be refined as much as possible at the farm, to get maximum economic return.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Our thesis is an analysis of four librarians view on LGBTQ and which implications these views have on the practical work with LGBTQ issues in the public library. The three ideal types we can identify are the excluding, the including, and the normcritical approach. We also want to know if the four librarians? standpoints can be connected to the above mentioned ideal types. We can see that the area where the implementations of the three ideal types are most visible is the way LGBTQ material is displayed in the library space.

Safety, its a word not commonly associated with elderly people living alone. There is however a device that is supposed to bring safety, and enable elderly people to continue living in their present household - an emergency dialer. However these devices does not serve their own purpose in terms of design. Thepurpose of this study is to create an emergency dailer that everybody would want to put on their wrist or bedside table. The market for these devices have looked the same for the last twentyfive years, despite of society´s advancements in both design and technology.

The cost of transportation has strongly increased in the recent years, transportations which are a major part for the construction companies. Skanska Asphalt which is a part of Skanska Sverige AB has noticed that there are significant cost savings to be made with the purchasing of transports. The transports in this case is about asphalt, where the costs are about 10% of the outsourcing business turnover. The purpose of this thesis is to study the working practice that Skanska Asphalt are using today in controlling and time-writing, for the asphalt transportations. Resulting in recommendations on how to improve the working practice at Skanska Asphalt.This study was conducted with the help of a number of interviews with Skanska?s employees and with suppliers of transportation to describe the practices which are being used in during the asphalt transportation.

SMF Skogsentreprenörerna is a nationwide organisation for Swedish forestry contractors. It has about 750 organised companies with somewhere around 1500 logging machines. These machines perform well over 50% of all yearly landed wood in Sweden. The members of SMF also performs more and more of other functions in Swedish professional forestry, such as soil scarification, planting and pre-commercial thinning of younger stands. In order to determine what major priorities SMF should focus on in the future a member survey was initialised and carried out by SMF together with Daniel Larsson-Snygg, student at the swedish university of agricultural sciences SLU. This report presents the result of this survey sent out to all members of SMF. It is intended to answer a number of questions about their entrepreneurship such as: What different kinds of work do these companies perform? How many machines and employees do they have? How old are the company owners and their employees? What are their thoughts about the future of their business? How well does SMF serve their members needs?.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

The aim of this literature study has been to investigate the general nurse's knowledge of diabetes type 1 and its complications. The questions were: What does the general nurse need to know about diabetes type 1? What does the general nurse know about diabetes type 1? To answer these questions, a literature study has been done of 8 scientific articles. The theoretical reference study on which the study has been based is Gustafsson's SAUK Model for affirmative nursing care. The result shows that the nurse lacks knowledge in the nursing care of diabetes patients and this reflects the fact that little research has been done on diabetes mellitus type 1 in recent years.

Abstract: After their introduction, technical systems designed for Situational Awareness have changed the possibilities on the battlefield. Today, Swedish tanks use a system known as the TCCS. This system offers many advantages to a tank platoon, but does it also bring disadvantages? This essay examines pros and cons with the TCCS. To find these the author uses a Swedish Armed Forces analyze model in a comparative study.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

In order for a judgement to be enforceable in another Member State, there is a certain requirement for an "intermediate? court procedure, a so-called exequatur procedure. An exequatur procedure is both expensive and time-consuming. The average cost of the procedure within the EU is 2 200 euro in a case without particular difficulties. In more complex cases, the cost of the procedure can be validated up to 12 700 euro.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.